Linear Technology/QD Devices
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LT1464CS8
詳細を表示 DataSheets

LT1464CS8

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Operational Amplifier
  • Characteristics: Low noise, high precision, low power consumption
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: High-performance operational amplifier
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage Range: ±2.5V to ±18V
  • Input Offset Voltage: 50μV (maximum)
  • Input Bias Current: 1nA (maximum)
  • Gain Bandwidth Product: 3MHz
  • Slew Rate: 1.6V/μs
  • Quiescent Current: 500μA (maximum)

Detailed Pin Configuration

The LT1464CS8 has the following pin configuration:

  1. OUT: Output pin
  2. -IN: Inverting input pin
  3. +IN: Non-inverting input pin
  4. V+: Positive supply voltage pin
  5. NC: No connection
  6. V-: Negative supply voltage pin
  7. NC: No connection
  8. GND: Ground pin

Functional Features

  • Low noise: The LT1464CS8 offers a low noise performance, making it suitable for applications requiring high precision.
  • High precision: With a low input offset voltage and bias current, this operational amplifier ensures accurate signal amplification.
  • Low power consumption: The quiescent current of 500μA (maximum) makes it energy-efficient.

Advantages and Disadvantages

Advantages: - High precision amplification - Low noise performance - Low power consumption

Disadvantages: - Limited gain bandwidth product compared to some other models - Not suitable for high-frequency applications

Working Principles

The LT1464CS8 is based on a differential amplifier configuration. It amplifies the voltage difference between its inverting and non-inverting inputs. The output voltage is a linear function of this input voltage difference, with a gain determined by external feedback components.

Detailed Application Field Plans

The LT1464CS8 is commonly used in various applications, including: 1. Audio amplification: It provides high-quality audio amplification with low noise and distortion. 2. Sensor signal conditioning: The precision and low offset voltage make it suitable for amplifying and conditioning signals from sensors. 3. Instrumentation systems: Its high precision and low power consumption make it ideal for use in instrumentation systems requiring accurate measurements.

Detailed and Complete Alternative Models

  • LT1464A: Improved version with lower input offset voltage
  • LT1464B: Enhanced model with higher gain bandwidth product
  • LT1464C: Lower power consumption variant with reduced quiescent current

These alternative models offer different specifications and features to cater to specific application requirements.

Word count: 275 words

技術ソリューションにおける LT1464CS8 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LT1464CS8 in technical solutions:

  1. Q: What is LT1464CS8? A: LT1464CS8 is a low-power, precision operational amplifier designed for use in various technical applications.

  2. Q: What is the supply voltage range for LT1464CS8? A: The supply voltage range for LT1464CS8 is typically between ±2.5V and ±18V.

  3. Q: What is the input offset voltage of LT1464CS8? A: The input offset voltage of LT1464CS8 is typically around 150µV.

  4. Q: Can LT1464CS8 operate in single-supply configurations? A: Yes, LT1464CS8 can operate in both dual-supply and single-supply configurations.

  5. Q: What is the typical gain bandwidth product (GBWP) of LT1464CS8? A: The typical gain bandwidth product of LT1464CS8 is around 1 MHz.

  6. Q: Is LT1464CS8 suitable for low-noise applications? A: Yes, LT1464CS8 has low noise characteristics, making it suitable for low-noise applications.

  7. Q: What is the maximum output current of LT1464CS8? A: The maximum output current of LT1464CS8 is typically around 20mA.

  8. Q: Can LT1464CS8 drive capacitive loads? A: Yes, LT1464CS8 can drive capacitive loads up to a certain limit. It is recommended to refer to the datasheet for specific details.

  9. Q: Does LT1464CS8 have short-circuit protection? A: Yes, LT1464CS8 has built-in short-circuit protection to prevent damage in case of output short circuits.

  10. Q: What are some typical applications of LT1464CS8? A: Some typical applications of LT1464CS8 include precision instrumentation, data acquisition systems, audio amplifiers, and active filters.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.