画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
IS25WP016D-JBLE

IS25WP016D-JBLE

Product Overview

Category

IS25WP016D-JBLE belongs to the category of flash memory devices.

Use

It is primarily used for data storage and retrieval in electronic devices such as smartphones, tablets, digital cameras, and other portable devices.

Characteristics

  • High-speed data transfer
  • Non-volatile memory
  • Compact size
  • Low power consumption

Package

IS25WP016D-JBLE comes in a small form factor package, making it suitable for integration into various electronic devices.

Essence

The essence of IS25WP016D-JBLE lies in its ability to store and retrieve data quickly and reliably, providing a crucial component for efficient functioning of electronic devices.

Packaging/Quantity

IS25WP016D-JBLE is typically packaged individually and is available in varying quantities depending on the manufacturer's specifications.

Specifications

  • Memory capacity: 16 megabits (2 megabytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating voltage: 2.7V - 3.6V
  • Operating temperature range: -40°C to +85°C
  • Data retention: Up to 20 years
  • Erase/Program cycles: Up to 100,000 cycles

Detailed Pin Configuration

The IS25WP016D-JBLE flash memory device has the following pin configuration:

  1. VCC - Power supply
  2. GND - Ground
  3. HOLD - Hold input
  4. WP - Write protect input
  5. SCK - Serial clock input
  6. SI - Serial data input
  7. SO - Serial data output
  8. CS - Chip select input

Functional Features

  • High-speed read and write operations
  • Sector erase and byte program operations
  • Protection mechanisms against accidental data modification
  • Efficient power management features
  • Support for multiple SPI modes

Advantages and Disadvantages

Advantages

  • Fast data transfer speeds
  • Compact size allows for easy integration into various devices
  • Low power consumption prolongs battery life
  • Reliable data retention for long periods
  • Protection mechanisms ensure data integrity

Disadvantages

  • Limited storage capacity compared to other flash memory options
  • Relatively higher cost per unit compared to alternative memory technologies

Working Principles

IS25WP016D-JBLE utilizes the Serial Peripheral Interface (SPI) protocol to communicate with the host device. It stores data in non-volatile memory cells, which retain information even when power is disconnected. The device uses a combination of electrical signals and logical operations to read, write, erase, and protect data.

Detailed Application Field Plans

IS25WP016D-JBLE finds applications in various electronic devices, including but not limited to: - Smartphones and tablets - Digital cameras - Portable media players - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models to IS25WP016D-JBLE include: - W25Q16JVZPIQ - Winbond Electronics Corporation - S25FL116K0XMFI011 - Cypress Semiconductor Corporation - MX25L1606EZNI-12G - Macronix International Co., Ltd. - AT25SF161-SHD-T - Adesto Technologies Corporation

These alternative models offer similar functionality and can be considered as substitutes based on specific requirements and compatibility.

In conclusion, IS25WP016D-JBLE is a flash memory device that provides high-speed data storage and retrieval capabilities. Its compact size, low power consumption, and reliable performance make it suitable for a wide range of electronic devices. While it has certain limitations in terms of storage capacity and cost, it offers several advantages such as fast data transfer speeds and protection mechanisms. With its working principles based on the SPI protocol, IS25WP016D-JBLE finds applications in various fields and has alternative models available for consideration.

技術ソリューションにおける IS25WP016D-JBLE の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of IS25WP016D-JBLE in technical solutions:

  1. Q: What is IS25WP016D-JBLE? A: IS25WP016D-JBLE is a serial flash memory chip manufactured by ISSI, designed for use in various technical solutions.

  2. Q: What is the storage capacity of IS25WP016D-JBLE? A: IS25WP016D-JBLE has a storage capacity of 16 megabits (2 megabytes).

  3. Q: What is the interface used to communicate with IS25WP016D-JBLE? A: IS25WP016D-JBLE uses the Serial Peripheral Interface (SPI) for communication.

  4. Q: Can IS25WP016D-JBLE be used in battery-powered devices? A: Yes, IS25WP016D-JBLE is designed to operate at low power consumption, making it suitable for battery-powered devices.

  5. Q: Is IS25WP016D-JBLE compatible with different microcontrollers? A: Yes, IS25WP016D-JBLE is compatible with a wide range of microcontrollers that support SPI communication.

  6. Q: What is the operating voltage range of IS25WP016D-JBLE? A: IS25WP016D-JBLE operates within a voltage range of 2.7V to 3.6V.

  7. Q: Does IS25WP016D-JBLE support high-speed data transfer? A: Yes, IS25WP016D-JBLE supports high-speed read and write operations, making it suitable for applications requiring fast data access.

  8. Q: Can IS25WP016D-JBLE be used in industrial environments? A: Yes, IS25WP016D-JBLE is designed to withstand industrial temperature ranges and is suitable for use in harsh environments.

  9. Q: Does IS25WP016D-JBLE support hardware and software write protection? A: Yes, IS25WP016D-JBLE provides both hardware and software write protection features to prevent accidental data modification.

  10. Q: Are there any development tools or libraries available for IS25WP016D-JBLE? A: Yes, ISSI provides development tools, documentation, and libraries to assist in the integration of IS25WP016D-JBLE into technical solutions.

Please note that these answers are general and may vary depending on specific implementation requirements and datasheet specifications.