Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
X9315UPI
詳細を表示 DataSheets

X9315UPI

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Potentiometer
  • Characteristics: Non-volatile, 32 Taps, 100kΩ Resistance Range
  • Package: 8-pin PDIP, SOIC, and TSSOP
  • Essence: Provides adjustable resistance in electronic circuits
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Resistance Range: 100kΩ
  • Number of Taps: 32
  • End-to-End Resistance Tolerance: ±20%
  • Operating Voltage: 2.7V to 5.5V
  • Temperature Range: -40°C to +85°C
  • Interface: Serial (SPI)

Detailed Pin Configuration

The X9315UPI has the following pin configuration:

  1. VCC: Power supply voltage input
  2. H: High voltage programming input
  3. CS: Chip select input
  4. SCK: Serial clock input
  5. SI: Serial data input
  6. SO: Serial data output
  7. WP: Write protect input
  8. GND: Ground

Functional Features

  • Non-volatile memory stores wiper position during power-off
  • 32 digitally controlled taps for precise resistance adjustment
  • SPI interface allows easy communication with microcontrollers
  • Low power consumption for energy-efficient applications
  • Wide operating voltage range enables compatibility with various systems

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures settings are retained even without power
  • Precise resistance adjustment with 32 taps for fine-grained control
  • Easy integration with microcontrollers through the SPI interface
  • Low power consumption extends battery life in portable devices

Disadvantages

  • Limited resistance range of 100kΩ may not be suitable for all applications
  • End-to-end resistance tolerance of ±20% may impact accuracy in some cases

Working Principles

The X9315UPI is a digital potentiometer that replaces traditional mechanical potentiometers. It utilizes a series of resistive elements and switches to create a digitally adjustable resistance. The wiper position is controlled by the microcontroller through the SPI interface, allowing precise resistance settings. The non-volatile memory ensures that the wiper position is retained even when power is removed.

Detailed Application Field Plans

The X9315UPI finds applications in various electronic systems where adjustable resistance is required. Some potential application fields include:

  1. Audio Systems: Volume control, tone adjustment
  2. Industrial Control: Calibration, feedback control
  3. Test and Measurement: Signal conditioning, calibration
  4. Automotive Electronics: Lighting control, motor speed control
  5. Consumer Electronics: Display brightness control, user interface adjustment

Detailed and Complete Alternative Models

  1. X9C103S: 10kΩ resistance range, 100 taps, SOIC package
  2. X9C503S: 50kΩ resistance range, 100 taps, SOIC package
  3. X9C104P: 100kΩ resistance range, 256 taps, PDIP package
  4. X9C503P: 50kΩ resistance range, 100 taps, PDIP package
  5. X9C102P: 1kΩ resistance range, 100 taps, PDIP package

These alternative models offer different resistance ranges, tap counts, and package options to suit specific application requirements.

In conclusion, the X9315UPI is a digital potentiometer IC that provides adjustable resistance in electronic circuits. Its non-volatile memory, precise control, and wide operating voltage range make it suitable for various applications. However, its limited resistance range and tolerance should be considered when selecting the appropriate model.

技術ソリューションにおける X9315UPI の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of X9315UPI in technical solutions:

  1. Q: What is X9315UPI? A: X9315UPI is a digitally controlled potentiometer (DCP) integrated circuit that can be used for various applications requiring variable resistance.

  2. Q: How does X9315UPI work? A: X9315UPI works by using digital signals to control the resistance value. It has an internal resistor network and a digital interface that allows users to set the desired resistance value.

  3. Q: What are the typical applications of X9315UPI? A: X9315UPI is commonly used in audio equipment, instrumentation, industrial controls, and other systems where precise resistance adjustment is required.

  4. Q: Can X9315UPI be used as a volume control in audio systems? A: Yes, X9315UPI can be used as a volume control in audio systems. Its digital control allows for precise adjustment of the resistance, which directly affects the volume level.

  5. Q: Is X9315UPI compatible with microcontrollers? A: Yes, X9315UPI is compatible with microcontrollers. It can be easily interfaced with microcontrollers using standard digital communication protocols such as I2C or SPI.

  6. Q: What is the resolution of X9315UPI? A: The resolution of X9315UPI depends on the specific model, but it typically ranges from 64 to 256 steps, allowing for fine-grained resistance adjustment.

  7. Q: Can X9315UPI be used in high-voltage applications? A: No, X9315UPI is designed for low-voltage applications only. It has a maximum operating voltage specified in its datasheet, and exceeding this voltage may damage the device.

  8. Q: Is X9315UPI a non-volatile memory (NVM) device? A: Yes, X9315UPI is a non-volatile memory device. It retains its resistance setting even when power is removed, making it suitable for applications where settings need to be preserved.

  9. Q: Can multiple X9315UPI devices be cascaded together? A: Yes, multiple X9315UPI devices can be cascaded together to increase the number of available resistance steps or to control multiple channels simultaneously.

  10. Q: Are there any specific precautions to consider when using X9315UPI? A: It is important to follow the manufacturer's guidelines and datasheet recommendations for proper voltage levels, current limits, and temperature ranges to ensure reliable operation of X9315UPI in your technical solution.

Please note that the answers provided here are general and may vary depending on the specific model and application requirements of X9315UPI.