Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
X9315TM
詳細を表示 DataSheets

X9315TM

Product Overview

  • Category: Electronic Component
  • Use: Digital Potentiometer
  • Characteristics: Non-volatile, 32 Taps, 10kΩ Resistance
  • Package: SOIC-8
  • Essence: Adjustable resistor with digital control
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Resistance: 10kΩ
  • Taps: 32
  • Interface: Serial
  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature: -40°C to +85°C
  • Endurance: 100,000 write cycles
  • Wiper Current: ±1mA (maximum)
  • Standby Current: 1µA (maximum)

Detailed Pin Configuration

The X9315TM has a total of 8 pins in the SOIC-8 package:

  1. VCC: Supply voltage input
  2. H: High-level control input
  3. CS: Chip select input
  4. U/D: Up/Down control input
  5. INC: Increment control input
  6. W: Wiper terminal
  7. GND: Ground
  8. VSS: Negative supply voltage input

Functional Features

  • Non-volatile memory stores wiper position during power-off
  • Increment/decrement control for digital adjustment
  • Low power consumption in standby mode
  • Wide operating voltage range for flexibility
  • Compact package for space-constrained applications

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures settings are retained even after power loss
  • Precise digital control allows for accurate adjustments
  • Low power consumption extends battery life
  • Small form factor enables use in compact designs

Disadvantages

  • Limited number of taps may not provide fine-grained adjustment
  • Wiper current limitation may restrict use in high-current applications

Working Principles

The X9315TM is a digital potentiometer that utilizes non-volatile memory to store the wiper position. It consists of a resistor network and a digital control interface. The resistance value between the wiper terminal and either end terminal can be adjusted digitally using the control inputs.

When the chip select (CS) input is activated, the up/down (U/D) control determines the direction of adjustment. The increment (INC) control increments the wiper position by one tap with each pulse. The high-level (H) control enables or disables the increment/decrement operation.

The X9315TM operates within a specified voltage range and provides a stable resistance value across temperature variations.

Detailed Application Field Plans

The X9315TM is commonly used in various electronic systems where precise resistance adjustment is required. Some potential application fields include:

  1. Audio Equipment: Volume control, tone adjustment
  2. Industrial Control Systems: Calibration, feedback control
  3. Test and Measurement Instruments: Fine-tuning, calibration
  4. Automotive Electronics: Sensor calibration, control systems
  5. Communication Systems: Signal conditioning, impedance matching

Detailed and Complete Alternative Models

  1. X9C103S: 10kΩ, 100 Taps, Serial Interface, SOIC-8 package
  2. MCP401X: 10kΩ, 64 Taps, SPI Interface, SOT-23 package
  3. AD8400: 10kΩ, 256 Taps, I2C Interface, SOIC-8 package
  4. CAT5114: 10kΩ, 128 Taps, Up/Down Interface, SOT-23 package

These alternative models offer similar functionality and can be considered based on specific requirements and design constraints.

In conclusion, the X9315TM is a digital potentiometer that provides precise resistance adjustment with non-volatile memory. Its compact size, low power consumption, and wide operating voltage range make it suitable for various applications in audio equipment, industrial control systems, test and measurement instruments, automotive electronics, and communication systems.

Word Count: 511

技術ソリューションにおける X9315TM の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of X9315TM in technical solutions:

  1. Q: What is X9315TM? A: X9315TM is a digital potentiometer integrated circuit (IC) that can be used to digitally control resistance values in various technical applications.

  2. Q: How does X9315TM work? A: X9315TM works by using a series of resistive elements and switches controlled by digital signals to adjust the resistance value.

  3. Q: What are the typical applications of X9315TM? A: X9315TM is commonly used in applications such as audio volume control, motor speed control, sensor calibration, and programmable voltage references.

  4. Q: Can X9315TM replace traditional mechanical potentiometers? A: Yes, X9315TM can be used as a replacement for mechanical potentiometers, offering advantages like digital control, smaller size, and higher reliability.

  5. Q: What is the resolution of X9315TM? A: X9315TM has a resolution of 256 steps, allowing for precise adjustment of resistance values.

  6. Q: Can X9315TM be controlled by microcontrollers or other digital devices? A: Yes, X9315TM can be easily interfaced with microcontrollers or other digital devices using standard communication protocols like I2C or SPI.

  7. Q: Is X9315TM suitable for low-power applications? A: Yes, X9315TM is designed to operate at low power, making it suitable for battery-powered devices or energy-efficient systems.

  8. Q: Can X9315TM withstand high temperatures? A: X9315TM is available in different temperature ranges, including versions that can withstand high temperatures up to 125°C, making it suitable for various environments.

  9. Q: Are there any limitations to the X9315TM's operating voltage range? A: X9315TM typically operates within a specified voltage range, so it is important to ensure that the applied voltage falls within the specified limits.

  10. Q: Can X9315TM be used in industrial applications? A: Yes, X9315TM is commonly used in industrial applications where precise resistance control is required, such as process control systems or test equipment.

Please note that the specific details and specifications of X9315TM may vary, so it's always recommended to refer to the manufacturer's datasheet for accurate information.