Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
X9313ZST2
詳細を表示 DataSheets

X9313ZST2

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Digital Potentiometer
  • Characteristics: Non-volatile, 32-tap, 10kΩ resistance range
  • Package: SOT-23-8
  • Essence: Provides a digitally controlled variable resistor
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Resistance Range: 10kΩ
  • Number of Taps: 32
  • Supply Voltage: 2.7V to 5.5V
  • Interface: Serial (SPI)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The X9313ZST2 has the following pin configuration:

  1. VCC: Supply voltage input
  2. H: High voltage terminal for resistor wiper
  3. W: Wiper terminal of the potentiometer
  4. GND: Ground reference
  5. CS: Chip select input
  6. SCK: Serial clock input
  7. SI: Serial data input
  8. SO: Serial data output

Functional Features

  • Non-volatile memory: Preserves wiper position during power-off
  • Digital control: Allows precise adjustment of resistance
  • Low power consumption: Suitable for battery-powered devices
  • Small form factor: SOT-23-8 package for space-constrained applications
  • Wide operating temperature range: Can be used in various environments

Advantages and Disadvantages

Advantages: - Non-volatile memory ensures settings are retained - Precise digital control allows fine adjustments - Low power consumption extends battery life - Compact package size saves board space - Suitable for use in extreme temperature conditions

Disadvantages: - Limited resistance range (10kΩ) - Serial interface may require additional circuitry

Working Principles

The X9313ZST2 is a digital potentiometer that replaces traditional mechanical potentiometers. It consists of a resistor network and a wiper terminal controlled by digital signals. The resistance between the wiper terminal and one end of the resistor network can be adjusted digitally, allowing precise control over the output voltage or current.

Detailed Application Field Plans

The X9313ZST2 can be used in various applications, including:

  1. Audio equipment: Volume control, tone adjustment
  2. Industrial automation: Calibration, signal conditioning
  3. Test and measurement instruments: Fine-tuning, calibration
  4. Consumer electronics: Display brightness control, user interface settings
  5. Automotive electronics: Climate control, motor speed control

Detailed and Complete Alternative Models

  1. X9C103S: 100Ω, 64-tap digital potentiometer
  2. MCP4131: 10kΩ, 128-tap digital potentiometer with I2C interface
  3. AD8403: 1kΩ, quad-channel digital potentiometer with SPI interface
  4. MAX5486: 50kΩ, dual-channel digital potentiometer with push-button interface
  5. CAT5114: 20kΩ, single-channel digital potentiometer with non-volatile memory

These alternative models offer different specifications and features to suit various application requirements.

Word count: 314 words

技術ソリューションにおける X9313ZST2 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of X9313ZST2 in technical solutions:

  1. Q: What is the X9313ZST2? A: The X9313ZST2 is a digitally controlled potentiometer, also known as a digital potentiometer, which can be used in various technical applications.

  2. Q: How does the X9313ZST2 work? A: The X9313ZST2 works by digitally controlling the resistance between its terminals, allowing for precise adjustment of voltage or current levels in a circuit.

  3. Q: What are the key features of the X9313ZST2? A: Some key features of the X9313ZST2 include non-volatile memory, low power consumption, wide operating voltage range, and high resolution.

  4. Q: In what applications can the X9313ZST2 be used? A: The X9313ZST2 can be used in a wide range of applications such as audio equipment, instrumentation, industrial control systems, and consumer electronics.

  5. Q: Can the X9313ZST2 replace traditional mechanical potentiometers? A: Yes, the X9313ZST2 can be a suitable replacement for mechanical potentiometers as it offers greater precision, reliability, and flexibility.

  6. Q: How is the X9313ZST2 controlled? A: The X9313ZST2 can be controlled using a microcontroller or any other digital interface capable of sending commands to adjust the resistance value.

  7. Q: Does the X9313ZST2 require external components for operation? A: No, the X9313ZST2 is a complete solution and does not require any additional external components for its basic operation.

  8. Q: Can the X9313ZST2 be used in both analog and digital circuits? A: Yes, the X9313ZST2 can be used in both analog and digital circuits, providing a seamless interface between the two domains.

  9. Q: Is the X9313ZST2 resistant to environmental factors such as temperature and humidity? A: Yes, the X9313ZST2 is designed to operate reliably over a wide temperature range and is resistant to common environmental factors.

  10. Q: Are there any application notes or reference designs available for the X9313ZST2? A: Yes, the manufacturer of the X9313ZST2 provides application notes and reference designs that can help users integrate the device into their specific technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases of the X9313ZST2 in different applications.