Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ISL89160FRTAZ-T
詳細を表示 DataSheets

ISL89160FRTAZ-T

Product Overview

Category

ISL89160FRTAZ-T belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • High efficiency
  • Compact size

Package

ISL89160FRTAZ-T is available in a small form factor package, which makes it suitable for space-constrained applications.

Essence

The essence of ISL89160FRTAZ-T lies in its ability to efficiently manage power in electronic devices, ensuring optimal performance and reliability.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a specified quantity per package. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Continuous Output Current: 1.6A
  • Switching Frequency: Up to 4MHz
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: 10 Ld 3x3 DFN

Detailed Pin Configuration

The ISL89160FRTAZ-T has the following pin configuration:

  1. VIN: Input voltage
  2. GND: Ground
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SW: Switch node
  6. PGND: Power ground
  7. LX: Inductor connection
  8. VOUT: Output voltage
  9. COMP: Compensation pin
  10. SS: Soft-start pin

Functional Features

  • Wide input voltage range allows compatibility with various power sources.
  • High switching frequency enables efficient power conversion.
  • Integrated protection features such as overcurrent and thermal shutdown enhance system reliability.
  • Soft-start functionality minimizes inrush current during startup.

Advantages and Disadvantages

Advantages

  • High efficiency power management
  • Compact size for space-constrained applications
  • Integrated protection features enhance system reliability

Disadvantages

  • Limited maximum continuous output current (1.6A)

Working Principles

ISL89160FRTAZ-T operates based on a switching regulator topology. It uses high-frequency switching to convert the input voltage to the desired output voltage with high efficiency. The integrated control circuitry ensures stable and regulated output voltage, while the protection features safeguard against potential faults or overloads.

Detailed Application Field Plans

ISL89160FRTAZ-T finds application in various electronic devices that require efficient power management. Some of the potential application fields include:

  1. Portable electronic devices: Smartphones, tablets, portable gaming consoles.
  2. IoT devices: Wearables, smart home devices, sensors.
  3. Industrial equipment: Power supplies, motor control systems, LED lighting.

Detailed and Complete Alternative Models

  1. ISL89161FRTAZ-T: Similar to ISL89160FRTAZ-T but with higher maximum continuous output current (2.5A).
  2. ISL89162FRTAZ-T: Similar to ISL89160FRTAZ-T but with lower maximum continuous output current (1A).

These alternative models provide options with varying output current capabilities to suit different application requirements.

(Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)

技術ソリューションにおける ISL89160FRTAZ-T の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ISL89160FRTAZ-T in technical solutions:

  1. Q: What is ISL89160FRTAZ-T? A: ISL89160FRTAZ-T is a high-performance, low-side load switch designed for use in various technical solutions.

  2. Q: What are the key features of ISL89160FRTAZ-T? A: Some key features include low on-resistance, wide input voltage range, overcurrent protection, thermal shutdown, and fault reporting.

  3. Q: What is the typical application of ISL89160FRTAZ-T? A: It is commonly used in power distribution systems, battery management, USB ports, and other applications where load switching is required.

  4. Q: What is the maximum load current that ISL89160FRTAZ-T can handle? A: The maximum load current is typically around 2A, but it may vary depending on the specific operating conditions.

  5. Q: Can ISL89160FRTAZ-T be used with different input voltages? A: Yes, it has a wide input voltage range of 1.8V to 5.5V, making it suitable for various applications.

  6. Q: Does ISL89160FRTAZ-T have any built-in protection features? A: Yes, it has overcurrent protection, which helps prevent damage to the load or the switch in case of excessive current flow.

  7. Q: How does ISL89160FRTAZ-T handle thermal issues? A: It has a built-in thermal shutdown feature that activates when the junction temperature exceeds a certain threshold, protecting the device from overheating.

  8. Q: Can ISL89160FRTAZ-T provide fault reporting? A: Yes, it has a fault flag output that can be used to indicate any abnormal conditions or faults in the load switch.

  9. Q: Is ISL89160FRTAZ-T compatible with other components and microcontrollers? A: Yes, it is designed to work with a wide range of components and microcontrollers commonly used in technical solutions.

  10. Q: Where can I find more detailed information about ISL89160FRTAZ-T? A: You can refer to the datasheet provided by the manufacturer, which contains comprehensive information about the device's specifications, application notes, and recommended usage guidelines.

Please note that the answers provided here are general and may vary depending on the specific requirements and operating conditions of your technical solution. It is always recommended to consult the datasheet and relevant documentation for accurate and up-to-date information.