Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ISL8490IP
詳細を表示 DataSheets

ISL8490IP

Product Overview

Category

ISL8490IP belongs to the category of integrated circuits (ICs).

Use

The ISL8490IP is commonly used as a voltage regulator in various electronic devices and systems.

Characteristics

  • Voltage regulation: The ISL8490IP provides stable and regulated output voltage.
  • Efficiency: It offers high efficiency in converting input voltage to the desired output voltage.
  • Protection features: The IC includes built-in protection mechanisms such as overcurrent protection, thermal shutdown, and reverse polarity protection.
  • Wide input voltage range: It can operate with a wide range of input voltages.
  • Low dropout voltage: The IC has a low dropout voltage, minimizing power loss during operation.

Package

ISL8490IP is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL8490IP lies in its ability to regulate voltage effectively and efficiently, ensuring stable power supply to connected devices.

Packaging/Quantity

ISL8490IP is typically packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 2.7V to 6V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 200mV at 500mA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The ISL8490IP has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage Regulation: The ISL8490IP ensures a stable and regulated output voltage, even with varying input voltages.
  • Overcurrent Protection: The IC includes overcurrent protection, safeguarding the connected devices from excessive current flow.
  • Thermal Shutdown: In case of overheating, the IC automatically shuts down to prevent damage.
  • Reverse Polarity Protection: The ISL8490IP protects against reverse polarity connection, preventing potential damage to the circuit.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation
  • Wide input voltage range
  • Built-in protection mechanisms
  • Low dropout voltage

Disadvantages

  • Limited maximum output current (500mA)

Working Principles

The ISL8490IP operates by regulating the input voltage to provide a stable output voltage. It utilizes internal circuitry to monitor and adjust the voltage levels, ensuring that the output voltage remains within the desired range. The IC also incorporates various protection features to safeguard the connected devices and itself from potential damage.

Detailed Application Field Plans

The ISL8490IP finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - Automotive electronics - Industrial control systems - Communication equipment

Detailed and Complete Alternative Models

Some alternative models to ISL8490IP that offer similar functionality include: - LM317: A popular linear voltage regulator with adjustable output voltage. - LT1084: A high-current, low-dropout voltage regulator. - TPS7A47: An ultra-low-noise, high-PSRR voltage regulator.

These alternative models can be considered based on specific requirements and design constraints.

Word count: 345 words

技術ソリューションにおける ISL8490IP の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ISL8490IP in technical solutions:

  1. Q: What is ISL8490IP? A: ISL8490IP is a high-speed, low-power, and robust RS-485/RS-422 transceiver.

  2. Q: What is the operating voltage range of ISL8490IP? A: The operating voltage range of ISL8490IP is typically between 3V and 5.5V.

  3. Q: Can ISL8490IP be used for half-duplex communication? A: Yes, ISL8490IP supports both half-duplex and full-duplex communication modes.

  4. Q: What is the maximum data rate supported by ISL8490IP? A: ISL8490IP can support data rates up to 20Mbps.

  5. Q: Is ISL8490IP suitable for industrial applications? A: Yes, ISL8490IP is designed to operate reliably in harsh industrial environments.

  6. Q: Does ISL8490IP have built-in protection features? A: Yes, ISL8490IP includes features like overvoltage protection, short-circuit protection, and thermal shutdown.

  7. Q: Can ISL8490IP be used in multi-drop networks? A: Yes, ISL8490IP can be used in multi-drop networks with up to 32 nodes.

  8. Q: What is the typical quiescent current consumption of ISL8490IP? A: The typical quiescent current consumption of ISL8490IP is very low, usually around 300µA.

  9. Q: Does ISL8490IP support hot-swapping of devices? A: Yes, ISL8490IP supports hot-swapping, allowing devices to be connected or disconnected without disrupting the communication.

  10. Q: Can ISL8490IP operate in a wide temperature range? A: Yes, ISL8490IP is designed to operate reliably in a wide temperature range, typically from -40°C to +85°C.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.