Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ISL8485CB
詳細を表示 DataSheets

ISL8485CB

Product Overview

Category

ISL8485CB belongs to the category of integrated circuits (ICs).

Use

The ISL8485CB is commonly used as a transceiver in various communication systems.

Characteristics

  • Integrated circuit
  • Transceiver functionality
  • Suitable for communication systems

Package

ISL8485CB is available in a compact package, typically a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL8485CB lies in its ability to transmit and receive data signals in communication systems.

Packaging/Quantity

ISL8485CB is usually packaged in reels or tubes, with a typical quantity of 250 or 1000 units per package.

Specifications

The specifications of ISL8485CB include:

  • Supply voltage range: 3V to 5.5V
  • Operating temperature range: -40°C to +85°C
  • Data rate: Up to 2.5 Mbps
  • Number of channels: 1
  • Input/output type: RS-485/RS-422

Detailed Pin Configuration

The pin configuration of ISL8485CB is as follows:

  1. DE (Driver Output Enable)
  2. RE (Receiver Output Enable)
  3. A (Non-Inverting Driver Output / Receiver Input)
  4. B (Inverting Driver Output / Receiver Input)
  5. GND (Ground)
  6. Y (Receiver Output)
  7. Vcc (Supply Voltage)
  8. Z (Driver Output)

Functional Features

The ISL8485CB offers the following functional features:

  • High-speed data transmission
  • Half-duplex communication
  • Enhanced ESD protection
  • Low power consumption
  • Wide supply voltage range

Advantages and Disadvantages

Advantages: - High-speed data transmission capability - Enhanced ESD protection ensures reliability - Wide supply voltage range allows for versatile applications

Disadvantages: - Limited to half-duplex communication - May require additional components for full-duplex operation

Working Principles

ISL8485CB operates based on the principles of differential signaling. It uses RS-485/RS-422 standards to transmit and receive data signals over long distances. The driver section converts logic-level signals into differential voltages, while the receiver section converts differential voltages back into logic-level signals.

Detailed Application Field Plans

ISL8485CB finds applications in various fields, including:

  1. Industrial automation systems
  2. Building automation systems
  3. Security systems
  4. Communication networks
  5. Automotive electronics

Detailed and Complete Alternative Models

Some alternative models to ISL8485CB include:

  1. MAX485
  2. SN75176
  3. LTC485
  4. ADM485
  5. SP3485

These models offer similar functionality and can be used as alternatives depending on specific requirements.

Word count: 320 words

技術ソリューションにおける ISL8485CB の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ISL8485CB in technical solutions:

  1. Question: What is ISL8485CB?
    - Answer: ISL8485CB is a high-speed, differential bus transceiver commonly used in industrial applications.

  2. Question: What is the operating voltage range of ISL8485CB?
    - Answer: The operating voltage range of ISL8485CB is typically between 3V and 5.5V.

  3. Question: Can ISL8485CB be used for half-duplex communication?
    - Answer: Yes, ISL8485CB can be used for both half-duplex and full-duplex communication.

  4. Question: What is the maximum data rate supported by ISL8485CB?
    - Answer: ISL8485CB supports a maximum data rate of up to 52 Mbps.

  5. Question: Does ISL8485CB have built-in protection features?
    - Answer: Yes, ISL8485CB has built-in protection features such as thermal shutdown and short-circuit protection.

  6. Question: Can ISL8485CB be used in harsh environments?
    - Answer: Yes, ISL8485CB is designed to operate in harsh industrial environments with extended temperature ranges.

  7. Question: What is the typical supply current of ISL8485CB?
    - Answer: The typical supply current of ISL8485CB is around 1.8 mA.

  8. Question: Can ISL8485CB be used in multi-drop bus systems?
    - Answer: Yes, ISL8485CB can be used in multi-drop bus systems with up to 32 nodes.

  9. Question: Does ISL8485CB support hot-swapping of devices?
    - Answer: Yes, ISL8485CB supports hot-swapping of devices without causing any damage.

  10. Question: What is the package type of ISL8485CB?
    - Answer: ISL8485CB is available in a small 8-pin SOIC package for easy integration into various designs.

Please note that these answers are general and may vary depending on specific application requirements.