Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ISL6596CBZ
詳細を表示 DataSheets

ISL6596CBZ

Product Overview

Category

ISL6596CBZ belongs to the category of integrated circuits (ICs).

Use

The ISL6596CBZ is commonly used in power management applications.

Characteristics

  • Integrated circuit
  • Power management functionality
  • High efficiency
  • Compact size

Package

ISL6596CBZ comes in a compact package, typically a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL6596CBZ lies in its ability to efficiently manage power in various electronic devices.

Packaging/Quantity

ISL6596CBZ is usually packaged in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 5.5V
  • Output Voltage Range: 0.8V to 3.3V
  • Maximum Output Current: 10A
  • Switching Frequency: 300kHz to 1MHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ISL6596CBZ has a total of 16 pins. Here is the detailed pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VCC: Supply voltage pin
  4. COMP: Compensation pin
  5. FB: Feedback pin
  6. SS/TR: Soft-start/Tracking pin
  7. RT/CLK: Timing resistor/clock synchronization pin
  8. SYNC: Synchronization pin
  9. BOOT: Bootstrap pin
  10. LX: Switch node pin
  11. PGND: Power ground pin
  12. PGND: Power ground pin
  13. VSENSE: Current sense pin
  14. VSENSE: Current sense pin
  15. VSENSE: Current sense pin
  16. VSENSE: Current sense pin

Functional Features

  • High-efficiency synchronous buck controller
  • Adaptive on-time control architecture
  • Integrated bootstrap diode
  • Adjustable soft-start time
  • Overcurrent protection
  • Undervoltage lockout (UVLO) protection
  • Power-good output indicator

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Compact size allows for space-saving designs
  • Integrated bootstrap diode simplifies circuitry
  • Adjustable soft-start time enables controlled power-up sequences

Disadvantages

  • Limited input voltage range (4.5V to 5.5V)
  • Maximum output current may not be sufficient for high-power applications

Working Principles

The ISL6596CBZ operates as a synchronous buck controller, regulating the output voltage by adjusting the duty cycle of the switching transistor. It utilizes an adaptive on-time control architecture to achieve high efficiency and fast transient response.

Detailed Application Field Plans

The ISL6596CBZ is commonly used in various power management applications, including but not limited to: - DC-DC converters - Voltage regulators - Power supplies - Battery charging circuits

Detailed and Complete Alternative Models

Here are some alternative models that offer similar functionality to the ISL6596CBZ: - LM2596S-ADJ - LT8610ABEMSE#PBF - TPS54332DDAR

These alternative models can be considered based on specific requirements and design constraints.

In conclusion, the ISL6596CBZ is a highly efficient integrated circuit used for power management applications. Its compact size, adjustable soft-start time, and integrated bootstrap diode make it a versatile choice for various electronic devices. However, designers should consider its limited input voltage range and maximum output current when selecting this IC for high-power applications.

技術ソリューションにおける ISL6596CBZ の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ISL6596CBZ in technical solutions:

  1. Q: What is ISL6596CBZ? A: ISL6596CBZ is a high-performance, dual-output synchronous buck controller IC used for voltage regulation in various technical applications.

  2. Q: What is the input voltage range supported by ISL6596CBZ? A: The input voltage range supported by ISL6596CBZ is typically between 4.5V and 24V.

  3. Q: What is the output voltage range that can be achieved using ISL6596CBZ? A: The output voltage range achievable with ISL6596CBZ depends on the external components used, but it can typically range from 0.8V to 5.5V.

  4. Q: Can ISL6596CBZ handle high current loads? A: Yes, ISL6596CBZ is designed to handle high current loads. It has a maximum continuous output current rating of up to 20A.

  5. Q: Does ISL6596CBZ support synchronous rectification? A: Yes, ISL6596CBZ supports synchronous rectification, which improves efficiency by reducing power losses.

  6. Q: What is the switching frequency range of ISL6596CBZ? A: The switching frequency range of ISL6596CBZ is typically between 100kHz and 1MHz, but it can be adjusted using external components.

  7. Q: Can ISL6596CBZ operate in a wide temperature range? A: Yes, ISL6596CBZ is designed to operate in a wide temperature range, typically from -40°C to +85°C.

  8. Q: Does ISL6596CBZ have built-in protection features? A: Yes, ISL6596CBZ incorporates various protection features such as overcurrent protection, overvoltage protection, and thermal shutdown.

  9. Q: Can ISL6596CBZ be used in battery-powered applications? A: Yes, ISL6596CBZ can be used in battery-powered applications as it supports a wide input voltage range and has low quiescent current.

  10. Q: What are some typical applications of ISL6596CBZ? A: ISL6596CBZ is commonly used in applications such as point-of-load power supplies, telecom equipment, industrial automation, and embedded systems.

Please note that the answers provided here are general and may vary depending on specific design considerations and requirements.