Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ISL4486IU-T
詳細を表示 DataSheets

ISL4486IU-T

Product Overview

Category

ISL4486IU-T belongs to the category of integrated circuits (ICs).

Use

The ISL4486IU-T is commonly used as a transceiver in various communication systems.

Characteristics

  • Integrated circuit transceiver
  • High-speed data transmission capabilities
  • Low power consumption
  • Compact package size
  • Wide operating voltage range

Package

ISL4486IU-T is available in a small outline integrated circuit (SOIC) package.

Essence

The essence of ISL4486IU-T lies in its ability to transmit and receive data signals efficiently and reliably.

Packaging/Quantity

ISL4486IU-T is typically packaged in reels, with each reel containing a specific quantity of ICs. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 3.0V to 5.5V
  • Data Rate: Up to 20 Mbps
  • Operating Temperature Range: -40°C to +85°C
  • Number of Pins: 8
  • Input/Output Logic Levels: CMOS/TTL compatible

Detailed Pin Configuration

  1. VCC - Power supply input
  2. GND - Ground connection
  3. RO - Receiver output
  4. RE - Receiver enable
  5. DE - Driver enable
  6. DI - Driver input
  7. DOUT - Driver output
  8. VEE - Negative power supply input

Functional Features

  • Bi-directional data transmission
  • Built-in driver and receiver circuitry
  • Automatic direction control
  • Enhanced ESD protection
  • Low electromagnetic interference (EMI)

Advantages and Disadvantages

Advantages

  • High-speed data transmission
  • Low power consumption
  • Compact size
  • Wide operating voltage range
  • Reliable performance

Disadvantages

  • Limited data rate compared to some other transceiver models
  • May require additional external components for certain applications

Working Principles

ISL4486IU-T operates based on the principles of differential signaling. It uses a balanced transmission line to transmit and receive data signals, which helps in reducing noise and improving signal integrity.

The driver circuitry amplifies the input data signal and sends it through the transmission line. On the receiving end, the receiver circuitry detects the differential voltage levels and converts them back into digital data.

Detailed Application Field Plans

ISL4486IU-T finds applications in various communication systems, including:

  1. Industrial automation
  2. Telecommunications
  3. Networking equipment
  4. Automotive electronics
  5. Medical devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to ISL4486IU-T include:

  1. MAX485
  2. SN75176
  3. LTC2850
  4. SP3485
  5. ADM2483

These models offer similar functionality and can be used as replacements depending on specific requirements.

In conclusion, ISL4486IU-T is an integrated circuit transceiver commonly used in communication systems. Its high-speed data transmission capabilities, low power consumption, and compact size make it suitable for various applications. However, it has limitations in terms of data rate and may require additional external components for certain applications. Nonetheless, its reliable performance and wide operating voltage range make it a popular choice in industries such as industrial automation, telecommunications, networking, automotive electronics, and medical devices.

技術ソリューションにおける ISL4486IU-T の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ISL4486IU-T in technical solutions:

  1. Q: What is ISL4486IU-T? A: ISL4486IU-T is a high-speed, low-power quad RS-485/RS-422 transceiver designed for industrial applications.

  2. Q: What is the maximum data rate supported by ISL4486IU-T? A: ISL4486IU-T supports data rates up to 20Mbps, making it suitable for high-speed communication requirements.

  3. Q: Can ISL4486IU-T be used in half-duplex and full-duplex modes? A: Yes, ISL4486IU-T can be used in both half-duplex and full-duplex modes, providing flexibility in various communication setups.

  4. Q: Is ISL4486IU-T compatible with RS-485 and RS-422 standards? A: Yes, ISL4486IU-T is fully compliant with both RS-485 and RS-422 standards, ensuring compatibility with a wide range of devices.

  5. Q: What is the operating voltage range of ISL4486IU-T? A: ISL4486IU-T operates from a single 3V to 5.5V power supply, making it suitable for a variety of applications.

  6. Q: Does ISL4486IU-T have built-in ESD protection? A: Yes, ISL4486IU-T features ±15kV ESD protection on the bus pins, providing robustness against electrostatic discharge events.

  7. Q: Can ISL4486IU-T operate in harsh industrial environments? A: Yes, ISL4486IU-T is designed to operate in harsh industrial environments, with a wide temperature range and rugged packaging.

  8. Q: Does ISL4486IU-T support hot-swapping of devices? A: Yes, ISL4486IU-T supports hot-swapping, allowing for easy replacement or addition of devices without disrupting the communication.

  9. Q: Can ISL4486IU-T be used in multi-drop networks? A: Yes, ISL4486IU-T is suitable for multi-drop networks, enabling communication between multiple devices on a single bus.

  10. Q: Are there any evaluation boards or reference designs available for ISL4486IU-T? A: Yes, Intersil provides evaluation boards and reference designs for ISL4486IU-T, making it easier to integrate into technical solutions.

Please note that these answers are general and may vary depending on specific application requirements.