ISL3281EIHZ-T belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for signal transmission and reception.
ISL3281EIHZ-T is available in a small outline package (SOP) with a specified pin configuration.
The essence of ISL3281EIHZ-T lies in its ability to facilitate reliable and efficient signal communication between electronic components.
ISL3281EIHZ-T is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.
ISL3281EIHZ-T operates based on differential signaling, where data is transmitted and received using two complementary signals. The driver circuitry amplifies the input signal, while the receiver circuitry detects and interprets the received signal.
ISL3281EIHZ-T finds applications in various fields, including: 1. Industrial automation 2. Telecommunications 3. Automotive electronics 4. Medical devices 5. Consumer electronics
Some alternative models that can be considered as alternatives to ISL3281EIHZ-T are: 1. MAX485EESA+ 2. SN65HVD485EDR 3. LTC2850IMS8#PBF 4. ADM485EARZ 5. SP3485EN-L/TR
These alternative models offer similar functionality and can be used as replacements depending on specific requirements.
Word count: 346 words
Sure! Here are 10 common questions and answers related to the application of ISL3281EIHZ-T in technical solutions:
Q1: What is ISL3281EIHZ-T? A1: ISL3281EIHZ-T is a high-speed, low-power RS-485/RS-422 transceiver IC designed for industrial applications.
Q2: What is the operating voltage range of ISL3281EIHZ-T? A2: The operating voltage range of ISL3281EIHZ-T is from 3V to 5.5V.
Q3: What is the maximum data rate supported by ISL3281EIHZ-T? A3: ISL3281EIHZ-T supports a maximum data rate of 20Mbps.
Q4: Can ISL3281EIHZ-T be used in half-duplex mode? A4: Yes, ISL3281EIHZ-T can be used in both half-duplex and full-duplex modes.
Q5: Does ISL3281EIHZ-T have built-in ESD protection? A5: Yes, ISL3281EIHZ-T has built-in ±15kV ESD protection on the RS-485/RS-422 bus pins.
Q6: What is the typical supply current of ISL3281EIHZ-T? A6: The typical supply current of ISL3281EIHZ-T is 300µA.
Q7: Can ISL3281EIHZ-T operate in harsh industrial environments? A7: Yes, ISL3281EIHZ-T is designed to operate in harsh industrial environments with extended temperature ranges and robust EMC performance.
Q8: Does ISL3281EIHZ-T support fail-safe biasing? A8: Yes, ISL3281EIHZ-T supports fail-safe biasing, ensuring the receiver outputs are in a known state when the bus is idle.
Q9: Can ISL3281EIHZ-T be used in multi-drop networks? A9: Yes, ISL3281EIHZ-T can be used in multi-drop networks, allowing multiple transceivers to be connected to a single bus.
Q10: What package options are available for ISL3281EIHZ-T? A10: ISL3281EIHZ-T is available in a small 8-lead DFN package and a 14-lead TSSOP package.
Please note that these answers are general and may vary depending on the specific application and requirements.