Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ISL28227FUZ-T7
詳細を表示 DataSheets

ISL28227FUZ-T7

Product Overview

Category

ISL28227FUZ-T7 belongs to the category of integrated operational amplifiers (op-amps).

Use

This product is commonly used in various electronic circuits and systems where amplification of signals is required.

Characteristics

  • High gain: The ISL28227FUZ-T7 offers a high voltage gain, making it suitable for applications requiring signal amplification.
  • Low noise: This op-amp has low input-referred noise, ensuring accurate signal processing.
  • Wide bandwidth: With a wide bandwidth, this product can handle high-frequency signals effectively.
  • Low power consumption: The ISL28227FUZ-T7 is designed to operate with low power consumption, making it energy-efficient.

Package

The ISL28227FUZ-T7 comes in a small form factor package, known as the μDFN-8. This package is compact and allows for easy integration into space-constrained designs.

Essence

The essence of the ISL28227FUZ-T7 lies in its ability to provide high-performance amplification while consuming minimal power.

Packaging/Quantity

This product is typically packaged in reels or tubes, containing a specified quantity of op-amps per package.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Input Offset Voltage: ±1mV (maximum)
  • Gain Bandwidth Product: 10MHz
  • Slew Rate: 4V/µs
  • Quiescent Current: 500µA (typical)

Detailed Pin Configuration

The ISL28227FUZ-T7 has a total of 8 pins. The pin configuration is as follows:

  1. V- (Negative Power Supply)
  2. V+ (Positive Power Supply)
  3. OUT (Output)
  4. IN- (Inverting Input)
  5. IN+ (Non-Inverting Input)
  6. NC (No Connection)
  7. NC (No Connection)
  8. GND (Ground)

Functional Features

  • Rail-to-Rail Inputs and Outputs: The op-amp supports input and output voltage ranges that span from the negative supply rail to the positive supply rail.
  • Unity-Gain Stable: The ISL28227FUZ-T7 remains stable even at unity gain, allowing for various circuit configurations.
  • Low Input Bias Current: This product exhibits low input bias current, minimizing the impact on signal sources.

Advantages and Disadvantages

Advantages

  • High gain and wide bandwidth enable accurate amplification of signals across a broad frequency range.
  • Low noise ensures precise signal processing in sensitive applications.
  • Compact package allows for easy integration into space-constrained designs.
  • Low power consumption makes it suitable for battery-powered devices.

Disadvantages

  • Limited supply voltage range may restrict its use in certain applications requiring higher voltages.
  • Not suitable for high-power applications due to its low quiescent current rating.

Working Principles

The ISL28227FUZ-T7 operates based on the principles of differential amplification. It amplifies the voltage difference between its inverting and non-inverting inputs, producing an amplified output signal.

Detailed Application Field Plans

The ISL28227FUZ-T7 finds application in various fields, including: 1. Audio amplification circuits 2. Sensor signal conditioning 3. Active filters 4. Data acquisition systems 5. Portable electronic devices

Detailed and Complete Alternative Models

  1. LM358: A popular general-purpose operational amplifier with similar characteristics.
  2. AD822: Precision instrumentation amplifier suitable for high-accuracy applications.
  3. MCP6002: Low-power dual operational amplifier with rail-to-rail inputs and outputs.

These alternative models offer similar functionality and can be considered as substitutes for the ISL28227FUZ-T7 in different applications.

Word count: 514 words

技術ソリューションにおける ISL28227FUZ-T7 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ISL28227FUZ-T7 in technical solutions:

  1. Q: What is ISL28227FUZ-T7? A: ISL28227FUZ-T7 is a dual operational amplifier (op-amp) designed for various applications in technical solutions.

  2. Q: What is the supply voltage range for ISL28227FUZ-T7? A: The supply voltage range for ISL28227FUZ-T7 is typically between 2.7V and 36V.

  3. Q: What is the input offset voltage of ISL28227FUZ-T7? A: The input offset voltage of ISL28227FUZ-T7 is typically around 1mV.

  4. Q: Can ISL28227FUZ-T7 operate in high-temperature environments? A: Yes, ISL28227FUZ-T7 has a wide temperature range and can operate in high-temperature environments up to 125°C.

  5. Q: What is the gain bandwidth product of ISL28227FUZ-T7? A: The gain bandwidth product of ISL28227FUZ-T7 is typically around 4MHz.

  6. Q: Does ISL28227FUZ-T7 have rail-to-rail inputs and outputs? A: Yes, ISL28227FUZ-T7 has rail-to-rail inputs and outputs, allowing it to handle signals close to the supply rails.

  7. Q: Can ISL28227FUZ-T7 be used in low-power applications? A: Yes, ISL28227FUZ-T7 has a low quiescent current consumption, making it suitable for low-power applications.

  8. Q: What is the input common-mode voltage range of ISL28227FUZ-T7? A: The input common-mode voltage range of ISL28227FUZ-T7 extends from the negative supply rail to within 1.5V of the positive supply rail.

  9. Q: Is ISL28227FUZ-T7 suitable for precision applications? A: Yes, ISL28227FUZ-T7 has low input offset voltage and low input bias current, making it suitable for precision applications.

  10. Q: Can ISL28227FUZ-T7 be used in single-supply applications? A: Yes, ISL28227FUZ-T7 can be used in both dual-supply and single-supply applications, providing flexibility in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.