Intersil
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
IS82C59A-12Z
詳細を表示 DataSheets

IS82C59A-12Z

Product Overview

Category

The IS82C59A-12Z belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for various applications, including data communication and control systems.

Characteristics

  • High performance: The IS82C59A-12Z offers reliable and efficient operation.
  • Versatility: It can be used in a wide range of electronic devices due to its compatibility with different systems.
  • Compact package: The IC is available in a compact package, making it suitable for space-constrained designs.
  • Low power consumption: It is designed to consume minimal power, ensuring energy efficiency.

Package

The IS82C59A-12Z is typically packaged in a small outline integrated circuit (SOIC) package. This package provides protection and facilitates easy integration into electronic circuits.

Essence

The essence of the IS82C59A-12Z lies in its ability to facilitate data communication and control within electronic systems.

Packaging/Quantity

The IC is usually supplied in reels or tubes, with each reel or tube containing a specific quantity of units. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Operating voltage: 3.3V
  • Maximum clock frequency: 12 MHz
  • Number of channels: 8
  • Data transfer rate: Up to 1 Mbps
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

The IS82C59A-12Z features a total of 28 pins, each serving a specific purpose. The pin configuration is as follows:

  1. INT0
  2. INT1
  3. INT2
  4. INT3
  5. INT4
  6. INT5
  7. INT6
  8. INT7
  9. AEN
  10. CS
  11. WR
  12. RD
  13. RESET
  14. D0
  15. D1
  16. D2
  17. D3
  18. D4
  19. D5
  20. D6
  21. D7
  22. CLK
  23. GND
  24. VCC
  25. A0
  26. A1
  27. A2
  28. A3

Functional Features

The IS82C59A-12Z offers the following functional features:

  • Interrupt handling: It supports interrupt-driven data transfer, allowing efficient communication between devices.
  • Data bus compatibility: The IC is compatible with a wide range of microprocessors and microcontrollers, enabling seamless integration into various systems.
  • Programmable control: It provides programmable control over various parameters, allowing customization based on specific requirements.
  • Error detection and handling: The IC incorporates error detection mechanisms to ensure reliable data transmission.

Advantages and Disadvantages

Advantages

  • High performance and reliability
  • Versatile compatibility with different systems
  • Compact package for space-constrained designs
  • Low power consumption for energy efficiency

Disadvantages

  • Limited number of channels (8)
  • Relatively lower clock frequency compared to some alternatives

Working Principles

The IS82C59A-12Z operates based on the principles of parallel data transfer and interrupt-driven communication. It receives and transmits data through its channels, utilizing the clock signal for synchronization. The IC can be programmed to handle interrupts and perform specific actions based on received data or events.

Detailed Application Field Plans

The IS82C59A-12Z finds applications in various fields, including: 1. Industrial automation systems 2. Robotics 3. Communication equipment 4. Embedded systems 5. Automotive electronics

In industrial automation systems, it can be used for real-time control and data acquisition. In robotics, the IC enables communication between different components and sensors. Communication equipment can utilize it for efficient data transfer. Embedded systems benefit from its versatility and compatibility. Automotive electronics can employ the IC for control and communication purposes.

Detailed and Complete Alternative Models

  1. IS82C59A-10Z: Similar to the IS82C59A-12Z but with a maximum clock frequency of 10 MHz.
  2. IS82C59A-15Z: Similar to the IS82C59A-12Z but with a maximum clock frequency of 15 MHz.
  3. IS82C59A-8Z: Similar to the IS82C59A-12Z but with a lower number of channels (8).

These alternative models offer similar functionality with slight variations in specifications to cater to different requirements.

In conclusion, the IS82C59A-12Z is a versatile integrated circuit used for data communication and control systems. Its high performance, compact package, and low power consumption make it suitable for various applications. While it has some limitations, such as the number of channels and clock frequency, alternative models provide flexibility

技術ソリューションにおける IS82C59A-12Z の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of IS82C59A-12Z in technical solutions:

  1. Q: What is IS82C59A-12Z? A: IS82C59A-12Z is a programmable interrupt controller (PIC) chip used in computer systems to manage interrupts from various devices.

  2. Q: What are the key features of IS82C59A-12Z? A: Some key features of IS82C59A-12Z include 8 interrupt request (IRQ) lines, cascading capability for handling more than 8 IRQs, and compatibility with various microprocessors.

  3. Q: How can IS82C59A-12Z be used in technical solutions? A: IS82C59A-12Z can be used to handle interrupt requests from different devices in a system, ensuring proper prioritization and efficient processing of interrupts.

  4. Q: Can IS82C59A-12Z be used in embedded systems? A: Yes, IS82C59A-12Z can be used in embedded systems where interrupt handling is required, such as industrial control systems, robotics, or automotive applications.

  5. Q: Is IS82C59A-12Z compatible with modern microprocessors? A: Yes, IS82C59A-12Z is compatible with a wide range of microprocessors, including popular ones like Intel x86 and ARM-based processors.

  6. Q: How many devices can IS82C59A-12Z handle simultaneously? A: IS82C59A-12Z can handle up to 8 devices directly, but it also supports cascading multiple PICs to handle more devices if needed.

  7. Q: Can IS82C59A-12Z handle both hardware and software interrupts? A: Yes, IS82C59A-12Z can handle both hardware interrupts generated by devices and software interrupts triggered by the system software.

  8. Q: What is the advantage of using IS82C59A-12Z over software-based interrupt handling? A: IS82C59A-12Z offloads the interrupt handling task from the processor, allowing it to focus on executing other instructions, resulting in improved system performance.

  9. Q: Are there any limitations or considerations when using IS82C59A-12Z? A: Some considerations include proper initialization and configuration of the chip, ensuring compatibility with the target microprocessor, and managing interrupt priorities effectively.

  10. Q: Where can I find more information about IS82C59A-12Z and its application in technical solutions? A: You can refer to the datasheet and technical documentation provided by the manufacturer of IS82C59A-12Z for detailed information on its features, specifications, and application guidelines.

Please note that the specific details and answers may vary depending on the context and requirements of your technical solution.