画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
HIP6604BCR-T

HIP6604BCR-T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-performance, low-power, voltage regulator
  • Package: BGA (Ball Grid Array)
  • Essence: Regulates and controls voltage in electronic devices
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 4A
  • Efficiency: Up to 95%
  • Operating Temperature Range: -40°C to +85°C
  • Package Dimensions: 4mm x 4mm

Detailed Pin Configuration

The HIP6604BCR-T has a total of 20 pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SS: Soft-start pin
  6. PGND: Power ground pin
  7. VCC: Supply voltage pin
  8. LX: Switching node pin
  9. BST: Bootstrap pin
  10. COMP: Compensation pin
  11. AGND: Analog ground pin
  12. SS/TR: Soft-start/Tracking pin
  13. VREF: Reference voltage pin
  14. ISET: Current limit set pin
  15. CLK: Clock synchronization pin
  16. SYNC: Synchronization pin
  17. MODE: Mode selection pin
  18. PGOOD: Power good indicator pin
  19. OCSET: Overcurrent protection set pin
  20. SS/TR: Soft-start/Tracking pin

Functional Features

  • Wide input voltage range allows for versatile applications
  • High output current capability for powering various loads
  • Excellent efficiency ensures minimal power loss
  • Integrated protection features such as overcurrent and overvoltage protection
  • Soft-start function prevents excessive inrush current during startup

Advantages and Disadvantages

Advantages

  • High-performance voltage regulation
  • Compact package size
  • Wide operating temperature range
  • Efficient power management
  • Integrated protection features

Disadvantages

  • Limited output voltage range (0.6V to 3.3V)
  • Requires external components for operation

Working Principles

The HIP6604BCR-T is a voltage regulator IC that utilizes a switching regulator topology to efficiently regulate the output voltage. It operates by continuously switching an internal power transistor on and off, controlling the energy flow to maintain a stable output voltage. The feedback mechanism adjusts the duty cycle of the switching transistor based on the difference between the actual output voltage and the desired reference voltage.

Detailed Application Field Plans

The HIP6604BCR-T is commonly used in various electronic devices that require precise voltage regulation. Some typical application fields include:

  1. Mobile devices: Smartphones, tablets, portable media players
  2. Computer peripherals: Hard drives, solid-state drives, optical drives
  3. Networking equipment: Routers, switches, modems
  4. Industrial automation: Motor control, power supplies, robotics
  5. Automotive electronics: Infotainment systems, lighting control, powertrain control

Detailed and Complete Alternative Models

  1. LM2596S-ADJ: Adjustable voltage regulator with similar specifications
  2. TPS54332: Synchronous buck converter with higher output current capability
  3. LT1763: Low dropout linear regulator with ultra-low noise performance
  4. MP2307: Step-down converter with wide input voltage range and high efficiency
  5. MAX15062: High-voltage, step-down converter with integrated protection features

These alternative models offer similar functionality and can be considered as substitutes for the HIP6604BCR-T in various applications.

Word count: 525 words

技術ソリューションにおける HIP6604BCR-T の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of HIP6604BCR-T in technical solutions:

  1. Q: What is HIP6604BCR-T? A: HIP6604BCR-T is a high-frequency, half-bridge gate driver IC designed for driving MOSFETs and IGBTs in various power applications.

  2. Q: What is the maximum voltage rating of HIP6604BCR-T? A: The maximum voltage rating of HIP6604BCR-T is typically around 60V.

  3. Q: What is the typical operating frequency range of HIP6604BCR-T? A: HIP6604BCR-T can operate at frequencies up to several hundred kilohertz (kHz), making it suitable for high-frequency switching applications.

  4. Q: Can HIP6604BCR-T be used with both MOSFETs and IGBTs? A: Yes, HIP6604BCR-T is compatible with both MOSFETs and IGBTs, allowing flexibility in choosing the appropriate power devices for your application.

  5. Q: Does HIP6604BCR-T have built-in protection features? A: Yes, HIP6604BCR-T includes various protection features such as under-voltage lockout (UVLO), over-current protection (OCP), and thermal shutdown.

  6. Q: What is the maximum output current capability of HIP6604BCR-T? A: HIP6604BCR-T can source/sink up to 2A of peak current, enabling it to drive power devices with relatively high gate capacitance.

  7. Q: Is HIP6604BCR-T suitable for automotive applications? A: Yes, HIP6604BCR-T is designed to meet the stringent requirements of automotive applications, including AEC-Q100 qualification.

  8. Q: Can HIP6604BCR-T operate in a wide temperature range? A: Yes, HIP6604BCR-T is specified to operate over a wide temperature range, typically from -40°C to 125°C.

  9. Q: Does HIP6604BCR-T require an external bootstrap diode? A: No, HIP6604BCR-T integrates a bootstrap diode, simplifying the design and reducing component count.

  10. Q: What package options are available for HIP6604BCR-T? A: HIP6604BCR-T is available in various package options, such as SOIC-8 and DFN-10, providing flexibility for different PCB layouts and space constraints.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of HIP6604BCR-T.