Intel FPGAs/Altera
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
EPM7064STC100-7N
詳細を表示 DataSheets

EPM7064STC100-7N

Product Overview

Category

The EPM7064STC100-7N belongs to the category of programmable logic devices (PLDs).

Use

This product is commonly used in digital circuit design and implementation. It provides a flexible and customizable solution for various applications.

Characteristics

  • Programmable: The EPM7064STC100-7N can be programmed to perform specific functions based on user requirements.
  • High Density: This PLD offers a high number of logic elements, allowing for complex designs.
  • Low Power Consumption: The device is designed to operate efficiently with minimal power consumption.
  • Fast Operation: The EPM7064STC100-7N offers fast switching speeds, enabling rapid data processing.

Package

The EPM7064STC100-7N is available in a standard 100-pin Thin Quad Flat Pack (TQFP) package.

Essence

The essence of this product lies in its ability to provide reconfigurable logic functionality, allowing designers to implement custom digital circuits without the need for dedicated hardware.

Packaging/Quantity

The EPM7064STC100-7N is typically packaged individually and is available in various quantities depending on customer requirements.

Specifications

  • Manufacturer: Altera Corporation
  • Model: EPM7064STC100-7N
  • Logic Elements: 64 macrocells
  • Operating Voltage: 3.3V
  • Speed Grade: 7
  • Maximum Frequency: 100 MHz
  • I/O Pins: 84
  • JTAG Support: Yes
  • Configuration Memory: Flash-based

Detailed Pin Configuration

The EPM7064STC100-7N has a total of 100 pins. Here is a brief overview of the pin configuration:

  • VCCIO: Power supply voltage for I/O pins
  • GND: Ground reference
  • JTAG: Pins for Joint Test Action Group (JTAG) interface
  • I/O Pins: General-purpose input/output pins
  • Clock Input: Input pin for clock signal
  • Configuration Pins: Pins for configuring the device

For a detailed pin configuration diagram, please refer to the product datasheet.

Functional Features

The EPM7064STC100-7N offers several functional features:

  • Reconfigurable Logic: The device can be programmed to implement various logic functions.
  • I/O Flexibility: It provides a sufficient number of I/O pins for interfacing with external devices.
  • JTAG Support: The JTAG interface allows for easy programming and debugging of the device.
  • Flash-based Configuration: The use of flash memory enables quick and reliable device configuration.

Advantages and Disadvantages

Advantages

  • Flexibility: The reprogrammable nature of the EPM7064STC100-7N allows for design changes without hardware modifications.
  • Cost-effective: PLDs eliminate the need for custom ASICs, reducing development costs.
  • Time-saving: Rapid prototyping and shorter design cycles are possible due to the programmable nature of the device.

Disadvantages

  • Limited Complexity: Compared to more advanced programmable devices, the EPM7064STC100-7N has a limited number of logic elements, which may restrict complex designs.
  • Learning Curve: Utilizing PLDs requires knowledge of hardware description languages and digital circuit design principles.

Working Principles

The EPM7064STC100-7N operates based on the principle of configurable logic. It consists of an array of logic elements that can be interconnected and programmed to perform specific functions. The device is configured using a programming tool that generates a bitstream file, which is then loaded into the PLD's configuration memory. Once programmed, the device operates according to the specified logic functions.

Detailed Application Field Plans

The EPM7064STC100-7N finds applications in various fields, including:

  1. Embedded Systems: The PLD can be used to implement custom interfaces and control logic in embedded systems.
  2. Communication Systems: It can be utilized for protocol conversion, signal processing, and data routing in communication systems.
  3. Industrial Automation: The device enables the implementation of control systems, motor control, and sensor interfacing in industrial automation applications.
  4. Consumer Electronics: The EPM7064STC100-7N can be employed in audio/video processing, gaming consoles, and home automation systems.

Detailed and Complete Alternative Models

  1. Xilinx XC9500XL Series
  2. Lattice Semiconductor ispMACH 4000ZE Series
  3. Microchip Technology ATF150x CPLD Series
  4. Intel (formerly Altera) MAX II Series

These alternative models offer similar programmable logic functionality and can be considered as alternatives to the EPM7064STC100-7N.

In conclusion, the EPM7064STC100

技術ソリューションにおける EPM7064STC100-7N の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of EPM7064STC100-7N in technical solutions:

  1. Q: What is EPM7064STC100-7N? A: EPM7064STC100-7N is a specific model of programmable logic device (PLD) manufactured by Intel (formerly Altera). It belongs to the MAX 7000 series and has 64 macrocells.

  2. Q: What are the typical applications of EPM7064STC100-7N? A: EPM7064STC100-7N can be used in various applications such as digital signal processing, control systems, data acquisition, communication systems, and many other digital logic designs.

  3. Q: How does EPM7064STC100-7N differ from other PLDs? A: EPM7064STC100-7N offers 64 macrocells, operates at a maximum frequency of 100 MHz, and has a 7 ns propagation delay. These specifications may vary compared to other PLDs.

  4. Q: Can I program EPM7064STC100-7N using VHDL or Verilog? A: Yes, EPM7064STC100-7N can be programmed using both VHDL (VHSIC Hardware Description Language) and Verilog (hardware description language).

  5. Q: What tools do I need to program EPM7064STC100-7N? A: You will need a compatible programming cable, such as a USB Blaster, and the Quartus Prime software provided by Intel (formerly Altera) to program the EPM7064STC100-7N.

  6. Q: Can I reprogram EPM7064STC100-7N after it has been programmed once? A: Yes, EPM7064STC100-7N is a reprogrammable device. You can erase the existing program and reprogram it with a new design as many times as needed.

  7. Q: What is the power supply requirement for EPM7064STC100-7N? A: EPM7064STC100-7N requires a single power supply voltage of 3.3V or 5V, depending on the specific configuration.

  8. Q: Can I use EPM7064STC100-7N in high-temperature environments? A: Yes, EPM7064STC100-7N is designed to operate within a wide temperature range, typically from -40°C to 85°C, making it suitable for various industrial applications.

  9. Q: How can I interface EPM7064STC100-7N with other components or devices? A: EPM7064STC100-7N provides various I/O pins that can be used to interface with other components or devices. These pins can be configured as inputs or outputs based on your design requirements.

  10. Q: Are there any limitations or considerations when using EPM7064STC100-7N? A: Some considerations include understanding the device's pinout, ensuring proper power supply decoupling, managing heat dissipation, and following the manufacturer's guidelines for programming and usage.