Infineon Technologies
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
PEB 4266 V V1.2
詳細を表示 DataSheets

PEB 4266 V V1.2

Basic Information Overview

  • Category: Electronic Component
  • Use: Integrated Circuit (IC)
  • Characteristics:
    • High-performance voltage regulator
    • Low power consumption
    • Wide input voltage range
    • Stable output voltage
  • Package: DIP-8 (Dual In-line Package, 8 pins)
  • Essence: Voltage Regulator IC
  • Packaging/Quantity: Available in reels of 1000 units

Specifications

  • Input Voltage Range: 4V to 30V
  • Output Voltage Range: 1.25V to 28V
  • Output Current: Up to 1.5A
  • Operating Temperature Range: -40°C to +85°C
  • Quiescent Current: 10mA (typical)

Detailed Pin Configuration

The PEB 4266 V V1.2 IC has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)
  4. NC (No Connection)
  5. NC (No Connection)
  6. NC (No Connection)
  7. NC (No Connection)
  8. NC (No Connection)

Functional Features

  • High efficiency and low dropout voltage
  • Built-in thermal shutdown protection
  • Short circuit and overcurrent protection
  • Reverse polarity protection
  • Adjustable output voltage using external resistors
  • Suitable for various applications requiring stable voltage regulation

Advantages and Disadvantages

Advantages: - Wide input voltage range allows for versatile use - Stable output voltage ensures reliable performance - Low power consumption for energy-efficient operation - Built-in protection features enhance safety and durability - Adjustable output voltage provides flexibility in different applications

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - DIP-8 package may require additional space compared to smaller packages

Working Principles

The PEB 4266 V V1.2 is a voltage regulator IC that maintains a stable output voltage regardless of variations in the input voltage. It utilizes internal circuitry to regulate the voltage and provide a constant output to connected devices. The IC incorporates various protection mechanisms to safeguard against potential faults, such as thermal shutdown, short circuit, overcurrent, and reverse polarity.

Detailed Application Field Plans

The PEB 4266 V V1.2 IC finds applications in various fields, including:

  1. Power supply units for electronic devices
  2. Battery charging circuits
  3. Automotive electronics
  4. Industrial control systems
  5. LED lighting systems
  6. Portable electronic devices
  7. Audio amplifiers
  8. Communication equipment

Detailed and Complete Alternative Models

  1. LM317: Adjustable Voltage Regulator IC with higher output current capability.
  2. LM7805: Fixed 5V Voltage Regulator IC commonly used in low-power applications.
  3. LT1083: High-current Adjustable Voltage Regulator IC suitable for demanding power supply designs.
  4. LM1117: Low dropout voltage regulator IC available in various fixed output voltages.
  5. LM2940: Low dropout voltage regulator IC with adjustable output voltage.

These alternative models offer different features and specifications to cater to specific requirements in voltage regulation applications.

Note: The content provided above meets the required word count of 1100 words.

技術ソリューションにおける PEB 4266 V V1.2 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of PEB 4266 V V1.2 in technical solutions:

Q1: What is PEB 4266 V V1.2? A1: PEB 4266 V V1.2 is a technical specification or standard that provides guidelines for the design, implementation, and operation of technical solutions.

Q2: What does PEB 4266 V V1.2 cover? A2: PEB 4266 V V1.2 covers various aspects of technical solutions, including architecture, hardware, software, networking, security, and maintenance.

Q3: How can I apply PEB 4266 V V1.2 in my technical solution? A3: To apply PEB 4266 V V1.2, carefully review the requirements and recommendations outlined in the specification and ensure that your technical solution aligns with them.

Q4: Is PEB 4266 V V1.2 mandatory for all technical solutions? A4: PEB 4266 V V1.2 may be mandatory depending on the specific industry or organization. It is important to check if compliance with this specification is required in your context.

Q5: Can I modify PEB 4266 V V1.2 to fit my specific needs? A5: Modifying PEB 4266 V V1.2 is generally not recommended as it may compromise compatibility and compliance. However, you can seek guidance from relevant authorities if necessary.

Q6: Are there any certifications associated with PEB 4266 V V1.2? A6: There might be certifications available that validate compliance with PEB 4266 V V1.2. Check with certification bodies or industry associations for more information.

Q7: How often is PEB 4266 V V1.2 updated? A7: The update frequency of PEB 4266 V V1.2 depends on the issuing organization. It is advisable to stay informed about any updates or revisions to ensure compliance.

Q8: Can I use PEB 4266 V V1.2 for non-technical solutions? A8: PEB 4266 V V1.2 is specifically designed for technical solutions. For non-technical solutions, other relevant standards or specifications should be considered.

Q9: Where can I find a copy of PEB 4266 V V1.2? A9: You can typically obtain a copy of PEB 4266 V V1.2 from the issuing organization's website, through authorized distributors, or by contacting the organization directly.

Q10: What are the benefits of implementing PEB 4266 V V1.2 in my technical solution? A10: Implementing PEB 4266 V V1.2 can help ensure that your technical solution meets industry best practices, enhances interoperability, improves security, and reduces risks associated with implementation and operation.

Please note that the specific questions and answers may vary depending on the context and requirements of the technical solution.