Infineon Technologies
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
IRSM515-084PA
詳細を表示 DataSheets

IRSM515-084PA

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - High efficiency - Low power consumption - Compact size - Wide input voltage range

Package: SOP-8 (Small Outline Package)

Essence: The IRSM515-084PA is a power management IC designed for efficient power conversion and control in various electronic devices.

Packaging/Quantity: Available in reels of 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V - 40V
  • Output Voltage Range: 1.2V - 37V
  • Maximum Output Current: 3A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The IRSM515-084PA has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin
  4. EN: Enable pin
  5. SW: Switch pin
  6. VOUT: Output voltage pin
  7. NC: No connection
  8. NC: No connection

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency ensures minimal power loss during operation.
  • Low power consumption contributes to energy-saving designs.
  • Overcurrent protection safeguards the circuit from damage.
  • Thermal shutdown protection prevents overheating.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption. - Compact size enables space-saving designs. - Wide input voltage range provides flexibility in application. - Overcurrent and thermal protection enhance reliability.

Disadvantages: - Limited maximum output current may not be suitable for high-power applications. - SOP-8 package may require additional heat dissipation measures in certain cases.

Working Principles

The IRSM515-084PA utilizes a switching regulator topology to efficiently convert the input voltage to the desired output voltage. It employs pulse-width modulation (PWM) techniques to regulate the output voltage and maintain stability under varying load conditions. The IC incorporates various protection mechanisms to ensure safe operation and prevent damage to the circuitry.

Detailed Application Field Plans

The IRSM515-084PA is widely used in the following applications:

  1. Power supplies for industrial equipment
  2. Automotive electronics
  3. LED lighting systems
  4. Battery charging circuits
  5. Consumer electronics

Detailed and Complete Alternative Models

  1. IRSM515-085PA: Similar specifications, but with higher maximum output current of 5A.
  2. IRSM515-083PA: Similar specifications, but with lower maximum output current of 2A.
  3. IRSM515-086PA: Similar specifications, but with wider input voltage range of 4.5V - 60V.

These alternative models provide options for different power requirements and application scenarios.

Word count: 320 words

技術ソリューションにおける IRSM515-084PA の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of IRSM515-084PA in technical solutions:

  1. Q: What is IRSM515-084PA? A: IRSM515-084PA is a power module designed for motor control applications, providing high efficiency and compact size.

  2. Q: What is the maximum voltage rating of IRSM515-084PA? A: The maximum voltage rating of IRSM515-084PA is typically around 600V.

  3. Q: Can IRSM515-084PA be used for both AC and DC motor control? A: Yes, IRSM515-084PA can be used for both AC and DC motor control applications.

  4. Q: What is the maximum current rating of IRSM515-084PA? A: The maximum current rating of IRSM515-084PA is typically around 15A.

  5. Q: Does IRSM515-084PA have built-in protection features? A: Yes, IRSM515-084PA includes various protection features such as overcurrent protection, overtemperature protection, and undervoltage lockout.

  6. Q: Can IRSM515-084PA be used in high-temperature environments? A: Yes, IRSM515-084PA is designed to operate reliably in high-temperature environments, typically up to 150°C.

  7. Q: Is IRSM515-084PA suitable for industrial automation applications? A: Yes, IRSM515-084PA is commonly used in industrial automation applications due to its robustness and high-performance characteristics.

  8. Q: Can IRSM515-084PA be easily integrated into existing motor control systems? A: Yes, IRSM515-084PA is designed for easy integration and can be readily used in existing motor control systems.

  9. Q: What is the typical efficiency of IRSM515-084PA? A: The typical efficiency of IRSM515-084PA is around 95%, ensuring efficient power conversion and minimizing energy losses.

  10. Q: Are there any application notes or reference designs available for IRSM515-084PA? A: Yes, the manufacturer provides application notes and reference designs to assist users in implementing IRSM515-084PA in their technical solutions.

Please note that the specific details and specifications may vary depending on the manufacturer and version of IRSM515-084PA. It's always recommended to refer to the datasheet or consult the manufacturer for accurate information.