Infineon Technologies
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
IRL8113L
詳細を表示 DataSheets

IRL8113L

Product Overview

The IRL8113L belongs to the category of power MOSFETs and is commonly used in electronic circuits for switching and amplification purposes. This MOSFET is known for its high efficiency, low on-state resistance, and fast switching speed. It is typically packaged in a TO-220AB package and is available in various quantities per package.

Basic Information

  • Category: Power MOSFET
  • Use: Switching and amplification in electronic circuits
  • Characteristics: High efficiency, low on-state resistance, fast switching speed
  • Package: TO-220AB
  • Essence: Power management
  • Packaging/Quantity: Available in various quantities per package

Specifications

  • Voltage Rating: [Specify voltage rating]
  • Current Rating: [Specify current rating]
  • On-State Resistance: [Specify on-state resistance]
  • Gate Threshold Voltage: [Specify gate threshold voltage]
  • Power Dissipation: [Specify power dissipation]

Detailed Pin Configuration

The IRL8113L features a standard pin configuration for a TO-220AB package: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High efficiency
  • Low on-state resistance
  • Fast switching speed
  • Enhanced power management capabilities

Advantages

  • High efficiency leads to reduced power loss
  • Low on-state resistance minimizes heat generation
  • Fast switching speed enables rapid response in circuit applications

Disadvantages

  • May require additional heat dissipation mechanisms in high-power applications
  • Sensitivity to static electricity and overvoltage conditions

Working Principles

The IRL8113L operates based on the principles of field-effect transistors, utilizing the control of an electric field to modulate the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate terminal, the MOSFET allows current to flow from the drain to the source, effectively acting as a switch or amplifier in electronic circuits.

Detailed Application Field Plans

The IRL8113L is widely used in various applications, including but not limited to: - Switching power supplies - Motor control - LED lighting - Audio amplifiers - Battery management systems

Detailed and Complete Alternative Models

  • IRL8113SPbF
  • IRL8113STRLPbF
  • IRL8113LPbF

In conclusion, the IRL8113L power MOSFET offers high efficiency, low on-state resistance, and fast switching speed, making it suitable for a wide range of electronic circuit applications.

[Word count: 398]

技術ソリューションにおける IRL8113L の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum continuous drain current of IRL8113L?

    • The maximum continuous drain current of IRL8113L is 60A.

  2. What is the voltage rating of IRL8113L?

    • IRL8113L has a voltage rating of 30V.

  3. Can IRL8113L be used for PWM applications?

    • Yes, IRL8113L is suitable for PWM (Pulse Width Modulation) applications.

  4. What is the typical on-resistance of IRL8113L?

    • The typical on-resistance of IRL8113L is 3.5mΩ.

  5. Is IRL8113L suitable for use in automotive applications?

    • Yes, IRL8113L is designed for automotive applications.

  6. Does IRL8113L have built-in protection features?

    • Yes, IRL8113L includes built-in protection against overcurrent and overtemperature.

  7. What is the operating temperature range of IRL8113L?

    • IRL8113L has an operating temperature range of -55°C to 175°C.

  8. Can IRL8113L be used in power management systems?

    • Yes, IRL8113L is commonly used in power management systems.

  9. Does IRL8113L require a heat sink for high-power applications?

    • For high-power applications, it is recommended to use a heat sink with IRL8113L.

  10. Is IRL8113L RoHS compliant?

    • Yes, IRL8113L is RoHS compliant, making it suitable for environmentally friendly designs.