Infineon Technologies
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
IKD06N60RFATMA1
詳細を表示 DataSheets

IKD06N60RFATMA1

Product Overview

Category

The IKD06N60RFATMA1 belongs to the category of power MOSFETs.

Use

It is commonly used in power supply applications, motor control, and other high-power switching applications.

Characteristics

  • High voltage capability
  • Low on-resistance
  • Fast switching speed
  • Low gate charge

Package

The IKD06N60RFATMA1 is typically available in a TO-220 package.

Essence

This MOSFET is essential for efficient power management and control in various electronic systems.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Voltage Rating: 600V
  • Current Rating: 6A
  • On-Resistance: 0.6Ω
  • Gate Charge: 18nC
  • Operating Temperature: -55°C to 150°C

Detailed Pin Configuration

The IKD06N60RFATMA1 has a standard TO-220 pin configuration: 1. Gate 2. Drain 3. Source

Functional Features

  • High voltage capability allows for use in diverse applications.
  • Low on-resistance minimizes power loss and improves efficiency.
  • Fast switching speed enables rapid response in switching applications.

Advantages

  • Efficient power management
  • Reduced power dissipation
  • Suitable for high-power applications

Disadvantages

  • Higher cost compared to lower-rated MOSFETs
  • May require additional heat sinking in high-power applications

Working Principles

The IKD06N60RFATMA1 operates based on the principles of field-effect transistors, where the gate voltage controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The IKD06N60RFATMA1 is widely used in: - Switch-mode power supplies - Motor drives - Inverters - Power factor correction circuits

Detailed and Complete Alternative Models

Some alternative models to the IKD06N60RFATMA1 include: - IRF840 - STP6NK60ZFP - FQP6N60C

In conclusion, the IKD06N60RFATMA1 is a versatile power MOSFET with high voltage capability, low on-resistance, and fast switching speed, making it suitable for various high-power applications.

[Word count: 314]

技術ソリューションにおける IKD06N60RFATMA1 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the maximum voltage rating of IKD06N60RFATMA1?

    • The maximum voltage rating of IKD06N60RFATMA1 is 600V.

  2. What is the maximum current rating of IKD06N60RFATMA1?

    • The maximum current rating of IKD06N60RFATMA1 is 6A.

  3. What type of package does IKD06N60RFATMA1 come in?

    • IKD06N60RFATMA1 comes in a TO-220F package.

  4. What is the on-state resistance of IKD06N60RFATMA1?

    • The on-state resistance of IKD06N60RFATMA1 is typically 0.65 ohms.

  5. What are the typical applications for IKD06N60RFATMA1?

    • IKD06N60RFATMA1 is commonly used in power supplies, motor control, and lighting applications.

  6. What is the gate threshold voltage of IKD06N60RFATMA1?

    • The gate threshold voltage of IKD06N60RFATMA1 is typically 2.5V.

  7. What is the maximum junction temperature of IKD06N60RFATMA1?

    • The maximum junction temperature of IKD06N60RFATMA1 is 150°C.

  8. Does IKD06N60RFATMA1 have built-in protection features?

    • Yes, IKD06N60RFATMA1 has built-in overcurrent and overtemperature protection.

  9. Can IKD06N60RFATMA1 be used in high-frequency switching applications?

    • Yes, IKD06N60RFATMA1 is suitable for high-frequency switching due to its fast switching characteristics.

  10. Is there a recommended heatsink for IKD06N60RFATMA1?

    • Yes, it is recommended to use a suitable heatsink to ensure proper thermal management when using IKD06N60RFATMA1 in high-power applications.