Infineon Technologies
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BTS555E3146HKSA1
詳細を表示 DataSheets

BTS555E3146HKSA1

Basic Information Overview

  • Category: Power Transistor Module
  • Use: This module is used for controlling high power loads in automotive applications.
  • Characteristics:
    • High current capability
    • Low on-resistance
    • Overtemperature protection
    • Short-circuit protection
    • ESD protection
  • Package: TO-263-7 (D2PAK)
  • Essence: The BTS555E3146HKSA1 is a power transistor module designed to handle high currents and provide protection features for automotive applications.
  • Packaging/Quantity: The module is typically sold in reels or tubes, with a quantity of 250 units per reel/tube.

Specifications

  • Maximum Continuous Drain Current: 30A
  • Drain-Source Voltage: 60V
  • On-Resistance: 8.5mΩ
  • Input Logic Level: 3.3V / 5V
  • Operating Temperature Range: -40°C to +150°C

Detailed Pin Configuration

The BTS555E3146HKSA1 module has the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | IN | Input control signal | | 2 | GND | Ground | | 3 | OUT | Output to load | | 4 | VCC | Supply voltage | | 5 | NC | No connection | | 6 | NC | No connection | | 7 | VS | Sense voltage |

Functional Features

  • High current handling capability allows it to control heavy loads.
  • Overtemperature protection prevents damage due to excessive heat.
  • Short-circuit protection safeguards against short circuits.
  • ESD protection ensures resistance to electrostatic discharges.

Advantages and Disadvantages

Advantages: - High current capability enables control of demanding loads. - Protection features enhance reliability and safety in automotive applications.

Disadvantages: - Limited voltage range (up to 60V). - Higher on-resistance compared to some alternative models.

Working Principles

The BTS555E3146HKSA1 operates as a power transistor module by controlling the flow of current between the input control signal (IN) and the output to the load (OUT). It utilizes MOSFET technology to achieve low on-resistance and high current handling capabilities. The module incorporates protection features such as overtemperature and short-circuit protection, ensuring safe operation in automotive environments.

Detailed Application Field Plans

The BTS555E3146HKSA1 is commonly used in various automotive applications, including: - Electric power steering systems - Electric braking systems - Automotive lighting systems - Motor control for fans and pumps - Battery management systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the BTS555E3146HKSA1 are: - BTS555E3166HKSA1 - BTS555E3178HKSA1 - BTS555E3189HKSA1 - BTS555E3197HKSA1

These alternative models offer similar functionality and characteristics, but may have different specifications or package types. It is recommended to review their datasheets for detailed information.

(Note: The content provided above is approximately 300 words. Please adjust the word count accordingly.)

技術ソリューションにおける BTS555E3146HKSA1 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of BTS555E3146HKSA1 in technical solutions:

  1. Q: What is BTS555E3146HKSA1? A: BTS555E3146HKSA1 is a high-side power switch used for controlling loads in automotive and industrial applications.

  2. Q: What is the maximum voltage and current rating of BTS555E3146HKSA1? A: The maximum voltage rating is 36V, and the maximum current rating is 50A.

  3. Q: What are the typical applications of BTS555E3146HKSA1? A: It is commonly used in automotive systems such as lighting control, motor control, and power distribution modules. It can also be used in industrial applications like factory automation and robotics.

  4. Q: How does BTS555E3146HKSA1 protect against overcurrent conditions? A: It has built-in overcurrent protection (OCP) that limits the current flow to prevent damage to the device and the load.

  5. Q: Can BTS555E3146HKSA1 handle short-circuit conditions? A: Yes, it has short-circuit protection (SCP) which shuts off the current flow in case of a short circuit to protect the system.

  6. Q: Does BTS555E3146HKSA1 have thermal protection? A: Yes, it has built-in thermal shutdown (TSD) that activates when the temperature exceeds a certain threshold, preventing overheating.

  7. Q: Is BTS555E3146HKSA1 compatible with microcontrollers or digital control systems? A: Yes, it can be controlled using a microcontroller or digital control system through its input pins.

  8. Q: What is the operating voltage range of BTS555E3146HKSA1? A: The operating voltage range is typically between 5V and 34V.

  9. Q: Can BTS555E3146HKSA1 handle inductive loads such as motors or solenoids? A: Yes, it is designed to handle inductive loads and has built-in protection against voltage spikes generated by inductive kickback.

  10. Q: Are there any specific precautions to consider when using BTS555E3146HKSA1? A: It is important to follow the recommended PCB layout guidelines, provide proper heat sinking, and ensure that the device is not subjected to excessive voltage or current beyond its ratings.

Please note that these answers are general and may vary depending on the specific application and requirements.