MC100ES6056DTR2

Overview

Category: Integrated Circuit (IC)

Use: Signal Conditioning and Clock Distribution

Characteristics: - High-speed signal conditioning and clock distribution - Low jitter and skew - Wide operating voltage range - Small form factor

Package: DFN-8 (Dual Flat No-Lead)

Essence: MC100ES6056DTR2 is an integrated circuit designed for high-speed signal conditioning and clock distribution applications. It provides low jitter and skew, making it suitable for demanding timing requirements.

Packaging/Quantity: The MC100ES6056DTR2 is typically sold in reels of 2500 units.

Specifications and Parameters

• Supply Voltage Range: 2.375V to 3.465V
• Input Frequency Range: DC to 5GHz
• Output Frequency Range: DC to 5GHz
• Operating Temperature Range: -40°C to +85°C
• Package Type: DFN-8

Pin Configuration

The MC100ES6056DTR2 features the following pin configuration:

___________ | | VCC|1 8|GND CLK|2 7|Qn SEL|3 6|Qp INP|4 5|INN |___________|

Functional Characteristics

The MC100ES6056DTR2 offers the following functional characteristics:

• High-speed signal conditioning
• Clock distribution
• Differential input and output
• Selectable output polarity

Advantages and Disadvantages

Advantages: - High-speed performance - Low jitter and skew - Wide operating voltage range - Small form factor

Disadvantages: - Limited input/output voltage range - Requires external power supply

Applicable Range of Products

The MC100ES6056DTR2 is commonly used in the following applications:

• High-speed data communication systems
• Network switches and routers
• Test and measurement equipment
• Data center infrastructure

Working Principles

The MC100ES6056DTR2 operates by conditioning and distributing high-speed signals. It accepts differential input signals and provides differential output signals with low jitter and skew. The device can be configured to invert or non-invert the output polarity based on the SEL pin.

Detailed Application Field Plans

The MC100ES6056DTR2 can be applied in various fields, including:

1. Telecommunications: Used in high-speed data transmission systems for reliable signal conditioning and clock distribution.
2. Networking: Enables precise timing synchronization in network switches and routers, ensuring efficient data transfer.
3. Test and Measurement: Provides accurate signal conditioning and distribution for precise measurements in testing equipment.
4. Data Centers: Facilitates synchronized clock distribution in data center infrastructure, improving overall system performance.

Detailed Alternative Models

Some alternative models to the MC100ES6056DTR2 include:

1. MC100EP016A: Offers similar functionality with enhanced performance.
2. MC100EPT21: Provides differential signal conditioning and clock distribution with extended temperature range.
3. MC100LVEL11: Differential clock distribution IC with lower power consumption.

5 Common Technical Questions and Answers

1. Q: What is the maximum operating frequency of the MC100ES6056DTR2? A: The MC100ES6056DTR2 can operate up to 5GHz.

2. Q: Can the MC100ES6056DTR2 be powered by a single voltage source? A: No, the MC100ES6056DTR2 requires a dual power supply (+VCC and GND).

3. Q: What is the purpose of the SEL pin? A: The SEL pin is used to select the output polarity (inverted or non-inverted).

4. Q: Can the MC100ES6056DTR2 be used in low-power applications? A: While the MC100ES6056DTR2 is not specifically designed for low-power applications, it offers a wide operating voltage range and small form factor, which can be advantageous in certain scenarios.

5. Q: Is the MC100ES6056DTR2 compatible with other logic families? A: The MC100ES6056DTR2 operates on ECL (Emitter-Coupled Logic) levels and may require level translation for compatibility with other logic families such as TTL or CMOS.

This concludes the encyclopedia entry for MC100ES6056DTR2.