IDT, Integrated Device Technology Inc
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
IDT74SSTVN16859CNLG
詳細を表示 DataSheets

IDT74SSTVN16859CNLG

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Voltage Translator
  • Characteristics: High-speed, low-power, bidirectional voltage translation
  • Package: 56-pin QFN (Quad Flat No-Lead)
  • Essence: Translates signals between different voltage levels
  • Packaging/Quantity: Tape and Reel, 250 units per reel

Specifications

  • Supply Voltage Range: 1.2V to 3.6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Maximum Data Rate: 400 Mbps
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The IDT74SSTVN16859CNLG has a total of 56 pins. The pin configuration is as follows:

  1. OE (Output Enable)
  2. A1 (Input/Output Voltage Level Control)
  3. B1 (Input/Output Voltage Level Control)
  4. GND (Ground)
  5. VCC (Power Supply)
  6. A2 (Input/Output Voltage Level Control)
  7. B2 (Input/Output Voltage Level Control)
  8. Y1 (Bidirectional Voltage Translation)
  9. Y2 (Bidirectional Voltage Translation)
  10. GND (Ground)
  11. VCC (Power Supply)
  12. A3 (Input/Output Voltage Level Control)
  13. B3 (Input/Output Voltage Level Control)
  14. Y3 (Bidirectional Voltage Translation)
  15. Y4 (Bidirectional Voltage Translation)
  16. GND (Ground)
  17. VCC (Power Supply)
  18. A4 (Input/Output Voltage Level Control)
  19. B4 (Input/Output Voltage Level Control)
  20. Y5 (Bidirectional Voltage Translation)
  21. Y6 (Bidirectional Voltage Translation)
  22. GND (Ground)
  23. VCC (Power Supply)
  24. A5 (Input/Output Voltage Level Control)
  25. B5 (Input/Output Voltage Level Control)
  26. Y7 (Bidirectional Voltage Translation)
  27. Y8 (Bidirectional Voltage Translation)
  28. GND (Ground)
  29. VCC (Power Supply)
  30. A6 (Input/Output Voltage Level Control)
  31. B6 (Input/Output Voltage Level Control)
  32. Y9 (Bidirectional Voltage Translation)
  33. Y10 (Bidirectional Voltage Translation)
  34. GND (Ground)
  35. VCC (Power Supply)
  36. A7 (Input/Output Voltage Level Control)
  37. B7 (Input/Output Voltage Level Control)
  38. Y11 (Bidirectional Voltage Translation)
  39. Y12 (Bidirectional Voltage Translation)
  40. GND (Ground)
  41. VCC (Power Supply)
  42. A8 (Input/Output Voltage Level Control)
  43. B8 (Input/Output Voltage Level Control)
  44. Y13 (Bidirectional Voltage Translation)
  45. Y14 (Bidirectional Voltage Translation)
  46. GND (Ground)
  47. VCC (Power Supply)
  48. A9 (Input/Output Voltage Level Control)
  49. B9 (Input/Output Voltage Level Control)
  50. Y15 (Bidirectional Voltage Translation)
  51. Y16 (Bidirectional Voltage Translation)
  52. GND (Ground)
  53. VCC (Power Supply)
  54. A10 (Input/Output Voltage Level Control)
  55. B10 (Input/Output Voltage Level Control)
  56. Y17 (Bidirectional Voltage Translation)

Functional Features

  • Bidirectional voltage translation between different voltage levels
  • High-speed operation with a maximum data rate of 400 Mbps
  • Low-power consumption
  • Output enable control for easy interfacing with other devices

Advantages and Disadvantages

Advantages: - Allows seamless communication between devices operating at different voltage levels - High-speed operation enables efficient data transfer - Low-power consumption helps in reducing overall power requirements

Disadvantages: - Limited to a maximum data rate of 400 Mbps - Requires careful consideration of input and output voltage levels to avoid signal distortion

Working Principles

The IDT74SSTVN16859CNLG is designed to translate signals between different voltage levels. It uses a combination of level shifters and voltage dividers to ensure proper signal translation. The device operates bidirectionally, allowing signals to be translated from a lower voltage level to a higher voltage level and vice versa. The output enable pin (OE) controls the direction of signal flow.

Detailed Application Field Plans

The IDT74SSTVN16859CNLG is commonly used in various applications where voltage translation is required. Some of the typical application fields include: - Communication systems - Data storage devices - Industrial automation - Automotive electronics - Consumer electronics

Detailed and

技術ソリューションにおける IDT74SSTVN16859CNLG の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of IDT74SSTVN16859CNLG in technical solutions:

  1. Question: What is IDT74SSTVN16859CNLG?
    Answer: IDT74SSTVN16859CNLG is a specific model of integrated circuit (IC) manufactured by IDT (Integrated Device Technology). It is commonly used in technical solutions for data communication and signal processing.

  2. Question: What is the purpose of IDT74SSTVN16859CNLG?
    Answer: The purpose of IDT74SSTVN16859CNLG is to provide high-speed, low-power, and reliable data transmission and reception capabilities in various electronic systems.

  3. Question: What are the key features of IDT74SSTVN16859CNLG?
    Answer: Some key features of IDT74SSTVN16859CNLG include differential inputs and outputs, wide operating voltage range, high-speed data transfer rates, and compatibility with various communication protocols.

  4. Question: In which applications can IDT74SSTVN16859CNLG be used?
    Answer: IDT74SSTVN16859CNLG can be used in a wide range of applications such as telecommunications, networking equipment, industrial automation, test and measurement instruments, and high-performance computing systems.

  5. Question: How does IDT74SSTVN16859CNLG ensure reliable data transmission?
    Answer: IDT74SSTVN16859CNLG incorporates advanced signal conditioning techniques, such as equalization and pre-emphasis, to compensate for signal degradation and minimize errors during data transmission.

  6. Question: Can IDT74SSTVN16859CNLG operate at high speeds?
    Answer: Yes, IDT74SSTVN16859CNLG is designed to operate at high speeds, typically supporting data rates of up to several gigabits per second (Gbps).

  7. Question: Is IDT74SSTVN16859CNLG compatible with different voltage levels?
    Answer: Yes, IDT74SSTVN16859CNLG supports a wide operating voltage range, making it compatible with various voltage levels commonly used in electronic systems.

  8. Question: Does IDT74SSTVN16859CNLG require any external components for operation?
    Answer: Yes, IDT74SSTVN16859CNLG may require some external components such as decoupling capacitors and termination resistors to ensure proper signal integrity and impedance matching.

  9. Question: Can IDT74SSTVN16859CNLG be easily integrated into existing designs?
    Answer: Yes, IDT74SSTVN16859CNLG is available in standard package options and follows industry-standard pin configurations, making it relatively easy to integrate into existing designs.

  10. Question: Where can I find more information about IDT74SSTVN16859CNLG?
    Answer: You can find more detailed information about IDT74SSTVN16859CNLG, including datasheets, application notes, and technical support, on the official website of IDT or by contacting their customer support team.