IDT74FCT810CTSO

Overview

• Category: Integrated Circuit
• Use: Logic Level Converter
• Characteristics: High-speed, low-power consumption
• Package: TSO (Thin Shrink Outline)
• Essence: Bi-directional voltage level translator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications and Parameters

• Supply Voltage: 4.5V to 5.5V
• Input Voltage Range: 0V to VCC
• Output Voltage Range: 0V to VCC
• Operating Temperature Range: -40°C to +85°C
• Propagation Delay Time: 3.5ns (max)
• Output Drive Capability: ±24mA

Pin Configuration

The IDT74FCT810CTSO has a total of 20 pins. The pin configuration is as follows:

1. OE (Output Enable)
2. A1 (Input/Output A1)
3. B1 (Input/Output B1)
4. GND (Ground)
5. A2 (Input/Output A2)
6. B2 (Input/Output B2)
7. VCC (Supply Voltage)
8. B3 (Input/Output B3)
9. A3 (Input/Output A3)
10. OE (Output Enable)
11. B4 (Input/Output B4)
12. A4 (Input/Output A4)
13. GND (Ground)
14. B5 (Input/Output B5)
15. A5 (Input/Output A5)
16. VCC (Supply Voltage)
17. A6 (Input/Output A6)
18. B6 (Input/Output B6)
19. OE (Output Enable)
20. GND (Ground)

Functional Characteristics

The IDT74FCT810CTSO is a bi-directional voltage level translator. It allows for seamless translation between different logic voltage levels, enabling communication between devices operating at different voltage levels. The device features high-speed operation and low-power consumption, making it suitable for various applications.

Advantages and Disadvantages

Advantages: - High-speed operation - Low-power consumption - Bi-directional voltage level translation

Disadvantages: - Limited output drive capability - Restricted operating temperature range

Applicable Range of Products

The IDT74FCT810CTSO is widely used in electronic systems where voltage level translation is required. It finds applications in microcontrollers, digital signal processors, and other integrated circuits that operate at different voltage levels.

Working Principles

The IDT74FCT810CTSO utilizes a combination of MOSFETs and CMOS technology to achieve bi-directional voltage level translation. It employs a voltage level shifting technique to ensure seamless communication between devices with different logic voltage levels.

Detailed Application Field Plans

1. Microcontroller interfacing with peripherals operating at different voltage levels.
2. Communication between digital signal processors and memory modules with varying voltage requirements.
3. Integration of multiple integrated circuits operating at different logic voltage levels within a system.

Detailed Alternative Models

1. IDT74FCT16244ATPV - 16-bit bi-directional voltage level translator with 3-state outputs.
2. IDT74FCT245ATQG8 - Octal bus transceiver and voltage level translator.
3. IDT74FCT374ATPY - Octal D-type flip-flop with tri-state outputs and voltage level translation.

5 Common Technical Questions and Answers

1. Q: What is the maximum supply voltage for the IDT74FCT810CTSO? A: The maximum supply voltage is 5.5V.

2. Q: Can the IDT74FCT810CTSO be used in automotive applications? A: No, the operating temperature range of -40°C to +85°C may not be suitable for automotive environments.

3. Q: What is the output drive capability of the IDT74FCT810CTSO? A: The device can drive up to ±24mA.

4. Q: Can the IDT74FCT810CTSO translate between different voltage levels? A: Yes, it is designed for bi-directional voltage level translation.

5. Q: How many units are there per reel of the IDT74FCT810CTSO? A: There are 2500 units per reel.

This encyclopedia entry provides an overview of the IDT74FCT810CTSO, including its category, use, characteristics, package, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers.