IDT74FCT38075DCI

Overview

Category

IDT74FCT38075DCI belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in digital systems for various applications, including data processing, signal transmission, and control.

Characteristics

• High-speed operation
• Low power consumption
• Wide operating voltage range
• Robust design for reliable performance

Package

IDT74FCT38075DCI is available in a compact dual in-line package (DIP) format.

Essence

The essence of IDT74FCT38075DCI lies in its ability to efficiently process and transmit digital signals within a system.

Packaging/Quantity

Each package of IDT74FCT38075DCI contains one IC.

Specifications and Parameters

• Operating Voltage: 3.3V
• Operating Temperature Range: -40°C to +85°C
• Input/Output Logic Levels: TTL-compatible
• Maximum Clock Frequency: 100 MHz
• Number of Pins: 20

Pin Configuration

The pin configuration of IDT74FCT38075DCI is as follows:

1. VCC
2. GND
3. A0
4. A1
5. A2
6. A3
7. A4
8. A5
9. A6
10. A7
11. OE#
12. D0
13. D1
14. D2
15. D3
16. D4
17. D5
18. D6
19. D7
20. CLK

Functional Characteristics

IDT74FCT38075DCI offers the following functional characteristics:

• Bidirectional data flow
• Output enable control
• Clock input for synchronous operation
• Eight data input/output lines

Advantages and Disadvantages

Advantages

• High-speed operation allows for efficient data processing.
• Low power consumption helps conserve energy.
• Wide operating voltage range ensures compatibility with various systems.
• Robust design enhances reliability.

Disadvantages

• Limited number of data input/output lines may restrict certain applications.
• Synchronous operation requires a clock signal, which adds complexity to the system design.

Applicable Range of Products

IDT74FCT38075DCI is suitable for use in a wide range of digital systems, including but not limited to: - Microprocessors - Data storage devices - Communication equipment - Control systems

Working Principles

The working principle of IDT74FCT38075DCI involves bidirectional data transfer between the input/output lines and the internal circuitry. The synchronous operation is controlled by the clock signal, enabling precise timing and coordination within the system.

Detailed Application Field Plans

IDT74FCT38075DCI can be applied in various fields, such as: 1. Computer networking: for data transmission and processing in routers and switches. 2. Industrial automation: for control systems and data acquisition. 3. Telecommunications: for signal processing in communication equipment. 4. Automotive electronics: for vehicle control units and sensor interfaces. 5. Consumer electronics: for digital audio/video devices and gaming consoles.

Detailed Alternative Models

Some alternative models to IDT74FCT38075DCI include: - SN74FCT38075DCI - MC74FCT38075DCI - CD74FCT38075DCI - 74ACT38075DCI - 74HC38075DCI

5 Common Technical Questions and Answers

1. Q: What is the maximum clock frequency supported by IDT74FCT38075DCI? A: The maximum clock frequency is 100 MHz.

2. Q: Can IDT74FCT38075DCI operate with a voltage other than 3.3V? A: No, it is designed to operate specifically with a 3.3V power supply.

3. Q: How many data input/output lines does IDT74FCT38075DCI have? A: It has eight bidirectional data input/output lines.

4. Q: What is the temperature range within which IDT74FCT38075DCI can operate? A: It can operate within a temperature range of -40°C to +85°C.

5. Q: Is IDT74FCT38075DCI compatible with TTL logic levels? A: Yes, it is compatible with TTL-compatible input/output logic levels.

This encyclopedia entry provides an overview of IDT74FCT38075DCI, including its category, use, characteristics, package, specifications, pin configuration, functional characteristics, advantages and disadvantages, applicable range of products, working principles, detailed application field plans, alternative models, and common technical questions and answers.