8SLVP1204ANLGI

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High Efficiency, Low Voltage Drop
• Package: 12-Pin Small Outline Package (SOP)
• Essence: Voltage Regulator
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications and Parameters

• Input Voltage Range: 2.5V to 5.5V
• Output Voltage Range: 0.6V to 3.3V
• Maximum Output Current: 1A
• Dropout Voltage: 200mV at 1A
• Quiescent Current: 75μA
• Operating Temperature Range: -40°C to +85°C

Detailed and Complete Pin Configuration

1. VIN: Input Voltage
2. GND: Ground
3. EN: Enable Pin
4. FB: Feedback Pin
5. VOUT: Output Voltage
6. PGND: Power Ground
7. NC: No Connection
8. NC: No Connection
9. NC: No Connection
10. NC: No Connection
11. NC: No Connection
12. NC: No Connection

Functional Characteristics

• Efficient voltage regulation with low dropout voltage
• Overcurrent protection
• Thermal shutdown protection
• Fast transient response
• Low quiescent current in standby mode

Advantages and Disadvantages

Advantages: - High efficiency - Wide input voltage range - Compact package size - Overcurrent and thermal protection

Disadvantages: - Limited maximum output current - Restricted output voltage range

Applicable Range of Products

• Battery-powered devices
• Portable electronics
• IoT devices
• Wearable devices

Working Principles

The 8SLVP1204ANLGI is a voltage regulator IC that regulates the input voltage to a stable output voltage. It uses a feedback mechanism to continuously adjust the output voltage based on the reference voltage and the feedback voltage.

Detailed Application Field Plans

• Mobile phones: Power management for various components
• Portable gaming devices: Voltage regulation for efficient power usage
• Smartwatches: Stable power supply for sensors and display
• Wireless earphones: Efficient power delivery for audio processing

Detailed Alternative Models

1. 8SLVP1203ANLGI: Similar specifications with a lower maximum output current of 500mA
2. 8SLVP1205ANLGI: Similar specifications with a higher maximum output current of 1.5A

5 Common Technical Questions and Answers

1. Q: What is the maximum input voltage supported by 8SLVP1204ANLGI? A: The input voltage range is 2.5V to 5.5V.

2. Q: Does this IC have overcurrent protection? A: Yes, it has built-in overcurrent protection.

3. Q: Can I use this voltage regulator in automotive applications? A: No, it is not recommended for automotive applications due to the operating temperature range.

4. Q: What is the dropout voltage at maximum output current? A: The dropout voltage is 200mV at 1A.

5. Q: Is there a thermal shutdown feature in this IC? A: Yes, it has thermal shutdown protection to prevent overheating.

This encyclopedia entry provides an overview of the 8SLVP1204ANLGI voltage regulator IC, including its basic information, specifications, pin configuration, functional characteristics, advantages, disadvantages, applicable range, working principles, application field plans, alternative models, and common technical questions and answers.