72V263L10PF8

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Power Management
• Characteristics: High voltage, low power consumption
• Package: LQFP (Low-profile Quad Flat Package)
• Essence: Voltage regulator and controller
• Packaging/Quantity: Tape and reel, 250 units per reel

Specifications

• Input Voltage Range: 6V to 80V
• Output Voltage Range: 0.8V to 60V
• Maximum Output Current: 3A
• Operating Temperature Range: -40°C to +125°C
• Package Dimensions: 7mm x 7mm

Detailed Pin Configuration

The 72V263L10PF8 IC has the following pin configuration:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VIN | Input Voltage | | 2 | GND | Ground | | 3 | EN | Enable Control | | 4 | FB | Feedback Voltage | | 5 | VOUT | Output Voltage | | 6 | COMP | Compensation | | 7 | SS | Soft-Start | | 8 | PG | Power Good |

Functional Features

• Wide input voltage range allows for versatile applications
• High efficiency and low power consumption
• Overcurrent and overvoltage protection
• Soft-start function for smooth power-up
• Power good indicator for system monitoring

Advantages and Disadvantages

Advantages: - Wide input voltage range enables compatibility with various power sources - High efficiency results in reduced power loss and heat generation - Comprehensive protection features enhance system reliability - Compact package size saves board space

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Operating temperature range may restrict usage in extreme environments

Working Principles

The 72V263L10PF8 is a voltage regulator and controller IC that regulates the input voltage to a desired output voltage. It utilizes a feedback mechanism to continuously monitor and adjust the output voltage, ensuring stability and accuracy. The enable control pin allows for easy on/off switching of the device. The compensation pin provides stability to the control loop, while the soft-start feature gradually ramps up the output voltage during power-up. The power good pin indicates whether the output voltage is within the acceptable range.

Detailed Application Field Plans

The 72V263L10PF8 is commonly used in various applications, including: 1. Automotive electronics: Power management in electric vehicles, battery charging systems, and LED lighting. 2. Industrial equipment: Voltage regulation in motor drives, robotics, and power supplies. 3. Telecommunications: Power management in network equipment, base stations, and data centers. 4. Renewable energy: Control and regulation of solar inverters and wind turbines. 5. Consumer electronics: Power supply control in smart home devices, audio/video equipment, and computer peripherals.

Detailed and Complete Alternative Models

1. 72V261L08PF6: Similar voltage regulator and controller with lower maximum output current (1.5A).
2. 72V265L12PF10: Similar voltage regulator and controller with higher maximum output current (5A).
3. 72V270L15PF12: Similar voltage regulator and controller with wider input voltage range (6V to 100V).

(Note: These alternative models are provided for reference and may have different specifications and pin configurations.)

This entry provides an overview of the 72V263L10PF8 integrated circuit, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.