Honeywell Sensing and Productivity Solutions
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SS495B-T2
詳細を表示 DataSheets

SS495B-T2

Product Overview

Category: Magnetic Sensor
Use: Position sensing in various applications
Characteristics: Small size, high sensitivity, low power consumption
Package: TO-92-style package
Essence: Reliable and accurate magnetic field detection
Packaging/Quantity: Bulk packaging, quantity varies

Specifications

  • Supply Voltage: 4.5V to 10.5V
  • Output Voltage: 2.5V ± 0.5V at 25°C
  • Sensitivity: 2.5 mV/G typical
  • Operating Temperature Range: -40°C to 150°C

Detailed Pin Configuration

  1. VCC (Supply Voltage)
  2. GND (Ground)
  3. VOUT (Output)

Functional Features

  • Linear output proportional to the magnetic flux density
  • Reverse polarity protection
  • Wide operating temperature range

Advantages and Disadvantages

Advantages: - High sensitivity - Small form factor - Low power consumption

Disadvantages: - Limited temperature range - Susceptible to electromagnetic interference

Working Principles

The SS495B-T2 operates based on the Hall effect, where a voltage is generated across a conductor when subjected to a magnetic field. This voltage is then amplified and provided as the output.

Detailed Application Field Plans

The SS495B-T2 is suitable for use in: - Proximity sensing - Brushless DC motor control - Speed and position control systems - Current sensing

Detailed and Complete Alternative Models

  1. A1324LUA-T
  2. OH090U
  3. MLX90316

In conclusion, the SS495B-T2 magnetic sensor offers reliable and accurate position sensing in a compact package. Its high sensitivity and low power consumption make it suitable for various applications, despite its limited temperature range and susceptibility to electromagnetic interference.

[Word count: 263]

技術ソリューションにおける SS495B-T2 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the SS495B-T2 sensor used for?

    • The SS495B-T2 sensor is commonly used for measuring linear or angular position in various technical solutions.

  2. What is the operating voltage range of the SS495B-T2 sensor?

    • The operating voltage range of the SS495B-T2 sensor is typically 4.5V to 10.5V.

  3. What is the output signal of the SS495B-T2 sensor?

    • The SS495B-T2 sensor provides a ratiometric output signal, which varies with the strength of the magnetic field.

  4. How does the SS495B-T2 sensor handle temperature variations?

    • The SS495B-T2 sensor is designed to operate within a wide temperature range, typically from -40°C to 150°C, making it suitable for various environments.

  5. Can the SS495B-T2 sensor be used in automotive applications?

    • Yes, the SS495B-T2 sensor is often utilized in automotive applications such as throttle position sensing and gearbox position detection.

  6. What are the typical mounting considerations for the SS495B-T2 sensor?

    • The SS495B-T2 sensor should be mounted close to the target magnet, ensuring proper alignment and sufficient clearance to avoid interference.

  7. Is the SS495B-T2 sensor sensitive to external magnetic fields?

    • The SS495B-T2 sensor has built-in protection against external magnetic fields, minimizing the impact on its performance.

  8. Can the SS495B-T2 sensor be used in harsh industrial environments?

    • Yes, the SS495B-T2 sensor is rugged and can withstand harsh industrial environments, including exposure to dust, moisture, and vibration.

  9. What are the typical applications of the SS495B-T2 sensor in robotics?

    • In robotics, the SS495B-T2 sensor is often employed for joint angle sensing, position feedback, and end-effector positioning.

  10. Are there any special considerations for interfacing the SS495B-T2 sensor with microcontrollers?

    • When interfacing with microcontrollers, it's important to ensure proper signal conditioning and noise immunity for accurate readings from the SS495B-T2 sensor.