FT24C512A-UTR-T

Product Overview

Category

The FT24C512A-UTR-T belongs to the category of non-volatile memory integrated circuits.

Use

This product is primarily used for data storage in various electronic devices such as microcontrollers, computers, and consumer electronics.

Characteristics

• Non-volatile: The FT24C512A-UTR-T retains stored data even when power is removed.
• High capacity: It has a storage capacity of 512 kilobits (64 kilobytes).
• I2C interface: The device communicates using the I2C protocol.
• Low power consumption: It operates at low power levels, making it suitable for battery-powered devices.

Package

The FT24C512A-UTR-T is available in a small outline package (SOP) with 8 pins.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic devices, ensuring data integrity even during power cycles.

Packaging/Quantity

The FT24C512A-UTR-T is typically packaged in reels or tubes, with each containing a specific quantity of chips. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

• Storage Capacity: 512 kilobits (64 kilobytes)
• Interface: I2C
• Operating Voltage: 1.7V to 5.5V
• Operating Temperature Range: -40°C to +85°C
• Write Cycle Endurance: 1 million cycles
• Data Retention: 100 years

Detailed Pin Configuration

The FT24C512A-UTR-T has the following pin configuration:

1. A0: Address input pin
2. A1: Address input pin
3. A2: Address input pin
4. SDA: Serial data input/output pin
5. SCL: Serial clock input pin
6. WP: Write protect pin
7. VCC: Power supply pin
8. GND: Ground pin

Functional Features

• Random Access: The FT24C512A-UTR-T allows random access to any memory location, enabling efficient data retrieval.
• Page Write: It supports page write operations, allowing multiple bytes of data to be written in a single operation, enhancing write efficiency.
• Write Protection: The WP pin can be used to protect the memory from accidental writes, preventing data corruption.
• Software Reset: The device can be reset using specific commands, ensuring proper initialization and reliable operation.

Advantages and Disadvantages

Advantages

• Non-volatile storage ensures data integrity during power cycles.
• High storage capacity for various applications.
• Low power consumption extends battery life.
• I2C interface enables easy integration with other devices.
• Compact package size facilitates space-constrained designs.

Disadvantages

• Limited storage capacity compared to other memory technologies.
• Slower write speeds compared to volatile memory.
• Susceptible to electromagnetic interference (EMI) due to its integrated circuit nature.

Working Principles

The FT24C512A-UTR-T utilizes electrically erasable programmable read-only memory (EEPROM) technology. It stores data by trapping charges in floating gate transistors, which can be electrically programmed or erased. The I2C interface allows communication between the device and the host microcontroller, enabling data read and write operations.

Detailed Application Field Plans

The FT24C512A-UTR-T finds application in various fields, including: 1. Embedded Systems: Used for storing configuration data, firmware updates, and user settings in microcontrollers. 2. Computer Peripherals: Employed in devices like printers, scanners, and network cards for storing calibration data and device parameters. 3. Consumer Electronics: Integrated into devices such as smart TVs, set-top boxes, and gaming consoles for storing user preferences, application data, and system settings.

Detailed and Complete Alternative Models

1. FT24C01A-UTR-T: 1 kilobit (128 bytes) capacity variant.
2. FT24C256A-UTR-T: 256 kilobits (32 kilobytes) capacity variant.
3. FT24C1024A-UTR-T: 1024 kilobits (128 kilobytes) capacity variant.

These alternative models offer different storage capacities to cater to specific application requirements.

Word count: 570 words