XR16V2550IM-F
Overview
Category: Integrated Circuit (IC)
Use: Serial Communication Controller
Characteristics: - High-performance UART (Universal Asynchronous Receiver Transmitter) with 16-byte FIFO (First-In, First-Out) buffer - Supports data rates up to 3 Mbps - Low power consumption - Wide operating voltage range: 1.8V to 5.5V - Small package size: 28-pin QFN (Quad Flat No-Lead) - RoHS compliant
Package: 28-pin QFN
Essence: The XR16V2550IM-F is a high-performance UART IC designed for serial communication applications.
Packaging/Quantity: The XR16V2550IM-F is available in a 28-pin QFN package. It is typically sold in reels of 2500 units.
Specifications
- Data Rate: Up to 3 Mbps
- Operating Voltage Range: 1.8V to 5.5V
- Supply Current: 4 mA (typical)
- Operating Temperature Range: -40°C to +85°C
- Package Dimensions: 5mm x 5mm x 0.9mm
Pin Configuration
The XR16V2550IM-F has a total of 28 pins. The pin configuration is as follows:
Pin 1: VCC
Pin 2: TXD
Pin 3: RXD
Pin 4: RTS
Pin 5: CTS
Pin 6: GND
...
For the complete pin configuration, please refer to the datasheet.
Functional Features
- 16-byte FIFO buffer for both transmit and receive operations
- Automatic hardware flow control using RTS (Request To Send) and CTS (Clear To Send) signals
- Programmable baud rate generator
- Supports 5, 6, 7, or 8 data bits, with optional parity and stop bits
- Independent transmit and receive interrupts
Advantages
- High-performance UART with fast data rates up to 3 Mbps
- Low power consumption for energy-efficient applications
- Wide operating voltage range allows compatibility with various systems
- Small package size saves board space
- RoHS compliant, ensuring environmental friendliness
Disadvantages
- Limited number of pins may restrict the functionality in complex designs
- Lack of built-in error detection and correction mechanisms
Working Principles
The XR16V2550IM-F is a UART IC that enables serial communication between devices. It uses a 16-byte FIFO buffer to store incoming and outgoing data, allowing efficient data transfer. The hardware flow control signals (RTS and CTS) ensure reliable communication by preventing data overflow.
The IC operates by generating and detecting electrical signals according to the specified baud rate, data bits, parity, and stop bits. It supports various configurations to accommodate different communication requirements.
Detailed Application Field Plans
The XR16V2550IM-F can be used in a wide range of applications, including but not limited to: - Industrial automation systems - Embedded systems - Communication modules - Medical devices - Consumer electronics
Its high-performance capabilities and low power consumption make it suitable for applications that require reliable and efficient serial communication.
Detailed and Complete Alternative Models
- XR16M2550IM-F: Similar to XR16V2550IM-F, but with an extended operating temperature range (-40°C to +105°C).
- XR16L2550IM-F: Low-power version of XR16V2550IM-F, designed for battery-powered applications.
- XR16C2550IM-F: Enhanced version with additional features such as hardware-assisted modem control signals.
These alternative models offer different specifications and features to cater to specific application requirements.
Note: The above information is based on the available data at the time of writing. For the most accurate and up-to-date information, please refer to the datasheet provided by the manufacturer.
技術ソリューションにおける XR16V2550IM-F の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of XR16V2550IM-F in technical solutions:
Q: What is XR16V2550IM-F? A: XR16V2550IM-F is a high-performance UART (Universal Asynchronous Receiver-Transmitter) integrated circuit designed for use in various communication applications.
Q: What are the key features of XR16V2550IM-F? A: Some key features of XR16V2550IM-F include high-speed data transfer rates, multiple UART channels, low power consumption, and support for various protocols.
Q: What are the typical applications of XR16V2550IM-F? A: XR16V2550IM-F is commonly used in applications such as industrial automation, embedded systems, networking equipment, point-of-sale terminals, and medical devices.
Q: How many UART channels does XR16V2550IM-F support? A: XR16V2550IM-F supports up to 8 UART channels, allowing for simultaneous communication with multiple devices.
Q: What is the maximum data transfer rate supported by XR16V2550IM-F? A: XR16V2550IM-F supports data transfer rates of up to 3 Mbps, ensuring fast and efficient communication.
Q: Does XR16V2550IM-F support flow control? A: Yes, XR16V2550IM-F supports hardware flow control (RTS/CTS) and software flow control (XON/XOFF), providing options for managing data flow.
Q: Can XR16V2550IM-F operate in low-power modes? A: Yes, XR16V2550IM-F offers low-power modes, enabling energy-efficient operation and extending battery life in portable devices.
Q: Is XR16V2550IM-F compatible with different operating voltages? A: Yes, XR16V2550IM-F supports a wide range of operating voltages, typically ranging from 1.62V to 3.63V.
Q: Does XR16V2550IM-F have built-in error detection and correction mechanisms? A: Yes, XR16V2550IM-F incorporates various error detection and correction features like parity checking and framing error detection.
Q: What is the package type of XR16V2550IM-F? A: XR16V2550IM-F is available in a compact QFN (Quad Flat No-Lead) package, making it suitable for space-constrained applications.
Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.