XR16L2752CJTR-F

Product Overview

• Category: Integrated Circuit (IC)
• Use: Serial Communication Interface
• Characteristics:
  • High-speed data transfer
  • Low power consumption
  • Small form factor
• Package: CJTR-F (QFN-32)
• Essence: Serial communication interface IC
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage: 3.3V
• Data Rate: Up to 3 Mbps
• Number of Channels: 2
• Operating Temperature Range: -40°C to +85°C
• Package Dimensions: 5mm x 5mm x 0.9mm

Detailed Pin Configuration

The XR16L2752CJTR-F has a total of 32 pins. The pin configuration is as follows:

1. VCC
2. GND
3. TXA
4. RXA
5. RTS
6. CTS
7. DCD
8. RI
9. DSR
10. DTR
11. RXB
12. TXB
13. CLKOUT
14. SCLK
15. SDI
16. SDO
17. CS
18. INT
19. RESET
20. NC
21. NC
22. NC
23. NC
24. NC
25. NC
26. NC
27. NC
28. NC
29. NC
30. NC
31. NC
32. NC

Functional Features

• Dual-channel UART with integrated RS-232 transceivers
• Supports full-duplex communication
• Automatic hardware flow control
• Programmable baud rate generator
• Supports 9-bit data framing
• Built-in FIFO buffers for efficient data transfer

Advantages and Disadvantages

Advantages: - High-speed data transfer - Low power consumption - Small form factor - Integrated RS-232 transceivers for easy interface with external devices - Hardware flow control for reliable communication

Disadvantages: - Limited number of channels (2) - Requires external components for voltage level translation

Working Principles

The XR16L2752CJTR-F is a serial communication interface IC that enables the exchange of data between a microcontroller or processor and external devices. It utilizes UART (Universal Asynchronous Receiver-Transmitter) technology to transmit and receive data in a serial format. The integrated RS-232 transceivers allow direct connection to RS-232 compatible devices.

The IC operates by converting parallel data from the microcontroller into serial data for transmission and vice versa. It supports various data framing formats, including 8-bit and 9-bit data, and provides hardware flow control to ensure reliable communication.

Detailed Application Field Plans

The XR16L2752CJTR-F finds applications in various fields, including:

1. Industrial Automation: Used for communication between PLCs (Programmable Logic Controllers), sensors, and other industrial equipment.
2. Networking Equipment: Enables serial communication in routers, switches, and network appliances.
3. Medical Devices: Facilitates data exchange between medical instruments and control systems.
4. Consumer Electronics: Used in devices such as set-top boxes, gaming consoles, and smart home appliances for serial communication.
5. Automotive Systems: Enables communication between automotive control units, sensors, and diagnostic tools.

Detailed and Complete Alternative Models

1. XR16L2750CJTR-F: Similar to XR16L2752CJTR-F but with a single channel instead of dual-channel.
2. XR16L2751CJTR-F: Similar to XR16L2752CJTR-F but with additional features like hardware flow control override.
3. XR16L2753CJTR-F: Similar to XR16L2752CJTR-F but with higher data rate capability (up to 10 Mbps).

(Note: The above alternative models are from the same product family and share similar characteristics and pin configuration.)

This concludes the encyclopedia entry for XR16L2752CJTR-F, a versatile serial communication interface IC with high-speed data transfer, low power consumption, and integrated RS-232 transceivers.