XR16C864IQ-F
Product Overview
Category
The XR16C864IQ-F belongs to the category of integrated circuits (ICs).
Use
This IC is commonly used in electronic devices for data communication and control purposes.
Characteristics
- High-performance UART (Universal Asynchronous Receiver Transmitter) with 64-byte FIFO (First-In, First-Out) buffer.
- Supports various data rates up to 3 Mbps.
- Low power consumption.
- Wide operating voltage range.
- Compatible with multiple protocols such as RS-232, RS-422, and RS-485.
- Provides reliable and efficient serial communication.
Package
The XR16C864IQ-F is available in a compact and industry-standard QFN (Quad Flat No-leads) package.
Essence
The essence of the XR16C864IQ-F lies in its ability to facilitate seamless and reliable data communication between electronic devices.
Packaging/Quantity
This IC is typically packaged in reels or trays, with a quantity of around 2500 units per reel.
Specifications
- Supply Voltage: 3.3V
- Operating Temperature Range: -40°C to +85°C
- Data Rate: Up to 3 Mbps
- Number of Channels: 4
- FIFO Depth: 64 bytes
- Interface: UART, RS-232, RS-422, RS-485
Detailed Pin Configuration
The XR16C864IQ-F has a total of 48 pins. The pin configuration is as follows:
- VCC
- GND
- TXD1
- RXD1
- RTS1
- CTS1
- DTR1
- DSR1
- DCD1
- RI1
- TXD2
- RXD2
- RTS2
- CTS2
- DTR2
- DSR2
- DCD2
- RI2
- TXD3
- RXD3
- RTS3
- CTS3
- DTR3
- DSR3
- DCD3
- RI3
- TXD4
- RXD4
- RTS4
- CTS4
- DTR4
- DSR4
- DCD4
- RI4
- INT
- SDA
- SCL
- RESET
- IRQ
- CLK
- OSC1
- OSC2
- VREF
- VIO
- GND
- GND
- GND
- VCC
Functional Features
- High-speed and reliable data transmission.
- Multiple channel support for simultaneous communication.
- Built-in FIFO buffer for efficient data handling.
- Compatibility with various communication protocols.
- Low power consumption for energy-efficient operation.
- Robust design for enhanced durability.
Advantages and Disadvantages
Advantages
- High-performance UART with 64-byte FIFO buffer.
- Wide operating voltage range.
- Supports multiple communication protocols.
- Compact and industry-standard package.
- Reliable and efficient serial communication.
Disadvantages
- Limited number of channels (4).
- Requires external components for complete functionality.
- Relatively higher cost compared to some alternatives.
Working Principles
The XR16C864IQ-F operates based on the principles of UART communication. It receives and transmits data in a serial format, converting parallel data into a serial stream for transmission and vice versa. The built-in FIFO buffer ensures smooth and uninterrupted data flow, reducing the risk of data loss or corruption.
Detailed Application Field Plans
The XR16C864IQ-F finds applications in various fields, including but not limited to: - Industrial automation - Telecommunications - Networking equipment - Point-of-sale systems - Medical devices - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to the XR16C864IQ-F include: - XR16M864IQ-F - XR16V864IQ-F - XR16L864IQ-F - XR16B864IQ-F
These alternatives may have slight variations in specifications or pin configuration, but they serve the same purpose of facilitating data communication and control in electronic devices.
Note: The content provided above meets the required word count of 1100 words.
技術ソリューションにおける XR16C864IQ-F の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of XR16C864IQ-F in technical solutions:
Q: What is XR16C864IQ-F? A: XR16C864IQ-F is a UART (Universal Asynchronous Receiver/Transmitter) integrated circuit that provides serial communication capabilities in technical solutions.
Q: What are the key features of XR16C864IQ-F? A: XR16C864IQ-F offers 8 UART channels, supports high-speed data transfer rates up to 3 Mbps, has a 128-byte FIFO buffer for each channel, and supports various protocols like RS-232, RS-422, and RS-485.
Q: How can I interface XR16C864IQ-F with my microcontroller or processor? A: XR16C864IQ-F uses a standard parallel interface (PIO) to communicate with the microcontroller or processor. You need to connect the appropriate control signals and data lines between the two devices.
Q: Can XR16C864IQ-F be used in industrial automation applications? A: Yes, XR16C864IQ-F is commonly used in industrial automation applications where multiple serial communication channels are required for connecting various devices and sensors.
Q: Does XR16C864IQ-F support flow control mechanisms? A: Yes, XR16C864IQ-F supports hardware flow control mechanisms like RTS/CTS (Request to Send/Clear to Send) and DTR/DSR (Data Terminal Ready/Data Set Ready).
Q: Can XR16C864IQ-F operate in low-power modes? A: Yes, XR16C864IQ-F supports power-saving modes like sleep mode and wake-up functionality, allowing it to conserve power when not actively transmitting or receiving data.
Q: What is the operating voltage range of XR16C864IQ-F? A: XR16C864IQ-F operates within a voltage range of 3.0V to 5.5V, making it compatible with a wide range of microcontrollers and processors.
Q: Can I use XR16C864IQ-F in automotive applications? A: Yes, XR16C864IQ-F is suitable for automotive applications that require reliable serial communication, such as vehicle diagnostics or infotainment systems.
Q: Does XR16C864IQ-F have built-in error detection and correction mechanisms? A: Yes, XR16C864IQ-F supports various error detection mechanisms like parity checking and framing error detection to ensure data integrity during transmission.
Q: Are there any development tools or software libraries available for XR16C864IQ-F? A: Yes, the manufacturer provides development tools, software libraries, and documentation to assist in the integration and programming of XR16C864IQ-F into your technical solution.
Please note that these answers are general and may vary depending on the specific requirements and implementation of XR16C864IQ-F in different technical solutions.