Exar Corporation
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
XR16C850CJ-F
詳細を表示 DataSheets

XR16C850CJ-F

Product Overview

Category

The XR16C850CJ-F belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for serial communication applications.

Characteristics

  • High-speed data transfer capability
  • Low power consumption
  • Compact size
  • Wide operating voltage range

Package

The XR16C850CJ-F is available in a small form factor package, typically a 48-pin LQFP (Quad Flat Package).

Essence

The essence of the XR16C850CJ-F lies in its ability to facilitate reliable and efficient serial communication.

Packaging/Quantity

The XR16C850CJ-F is usually packaged in reels or trays, with a typical quantity of 250 units per reel/tray.

Specifications

  • Data Rate: Up to 1 Mbps
  • Operating Voltage Range: 3.0V to 5.5V
  • Number of Channels: 1
  • Interface: UART (Universal Asynchronous Receiver Transmitter)
  • Operating Temperature Range: -40°C to +85°C
  • RoHS Compliance: Yes

Detailed Pin Configuration

The XR16C850CJ-F has a total of 48 pins. The pin configuration is as follows:

  1. VCC
  2. GND
  3. TXD (Transmit Data)
  4. RXD (Receive Data)
  5. RTS (Request To Send)
  6. CTS (Clear To Send)
  7. DTR (Data Terminal Ready)
  8. DSR (Data Set Ready)
  9. RI (Ring Indicator)
  10. CD (Carrier Detect)
  11. INT (Interrupt)
  12. REFCLK (Reference Clock)
  13. SDA (Serial Data)
  14. SCL (Serial Clock) 15-48. Reserved

Functional Features

  • Full-duplex communication
  • Hardware flow control (RTS/CTS)
  • Software flow control (XON/XOFF)
  • Parity error detection
  • Framing error detection
  • Break condition detection
  • Programmable baud rate generator

Advantages and Disadvantages

Advantages

  • High-speed data transfer capability allows for efficient communication.
  • Low power consumption makes it suitable for battery-powered devices.
  • Compact size enables integration into space-constrained designs.
  • Wide operating voltage range provides flexibility in various applications.

Disadvantages

  • Limited number of channels (1) may not be sufficient for certain multi-channel communication requirements.
  • Lack of built-in error correction mechanisms may require additional external circuitry for error handling.

Working Principles

The XR16C850CJ-F operates based on the principles of UART, which is a widely used asynchronous serial communication protocol. It receives and transmits data in a sequential manner, using start and stop bits to frame each data byte. The IC utilizes hardware and software flow control mechanisms to ensure reliable data transfer between the transmitter and receiver.

Detailed Application Field Plans

The XR16C850CJ-F finds application in various fields, including but not limited to: - Industrial automation - Telecommunications - Embedded systems - Consumer electronics - Medical devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the XR16C850CJ-F include: - MAX3100 - SC16C550B - ST16C2552

These alternatives can be considered based on specific project requirements and compatibility with existing designs.

Word count: 445 words

技術ソリューションにおける XR16C850CJ-F の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of XR16C850CJ-F in technical solutions:

  1. Q: What is XR16C850CJ-F? A: XR16C850CJ-F is a UART (Universal Asynchronous Receiver Transmitter) chip used for serial communication in technical solutions.

  2. Q: What are the key features of XR16C850CJ-F? A: Some key features include support for high-speed data transfer, compatibility with various protocols, multiple operating modes, and low power consumption.

  3. Q: What is the maximum data transfer rate supported by XR16C850CJ-F? A: XR16C850CJ-F supports data transfer rates up to 1.8432 Mbps.

  4. Q: Can XR16C850CJ-F be used in both full-duplex and half-duplex communication modes? A: Yes, XR16C850CJ-F supports both full-duplex and half-duplex communication modes.

  5. Q: Is XR16C850CJ-F compatible with different voltage levels? A: Yes, XR16C850CJ-F is compatible with various voltage levels, including 3.3V and 5V.

  6. Q: Does XR16C850CJ-F have built-in FIFO buffers? A: Yes, XR16C850CJ-F has 16-byte transmit and receive FIFO buffers, which help in improving data transfer efficiency.

  7. Q: Can XR16C850CJ-F be used in industrial applications? A: Yes, XR16C850CJ-F is suitable for industrial applications due to its robust design and wide temperature range support.

  8. Q: What kind of interfaces does XR16C850CJ-F support? A: XR16C850CJ-F supports both UART and RS-232 interfaces.

  9. Q: Is XR16C850CJ-F compatible with different operating systems? A: Yes, XR16C850CJ-F is compatible with various operating systems, including Windows, Linux, and macOS.

  10. Q: Can XR16C850CJ-F be used in automotive applications? A: Yes, XR16C850CJ-F can be used in automotive applications that require reliable serial communication.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements of your technical solution.