画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SP6205EM5-3-0/TR

SP6205EM5-3-0/TR

Product Overview

Category

SP6205EM5-3-0/TR belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: SP6205EM5-3-0/TR comes in a small SOT-23-5 package.
  • Essence: It is a low dropout linear voltage regulator.
  • Packaging/Quantity: The product is typically packaged in reels and available in large quantities.

Specifications

The specifications of SP6205EM5-3-0/TR are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 3.0V
  • Dropout Voltage: 200mV at 100mA
  • Maximum Output Current: 150mA
  • Line Regulation: ±0.1%
  • Load Regulation: ±0.4%
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of SP6205EM5-3-0/TR is as follows:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. BYP (Bypass Capacitor)
  5. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage: The SP6205EM5-3-0/TR has a low dropout voltage, allowing it to regulate voltage efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: The product consumes minimal current when in standby mode, resulting in improved energy efficiency.
  • Thermal shutdown protection: It incorporates thermal shutdown protection to prevent damage due to excessive heat.
  • Short-circuit protection: The regulator is equipped with short-circuit protection to safeguard the circuit from damage in case of a short-circuit condition.

Advantages and Disadvantages

Advantages

  • Small package size
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection

Disadvantages

  • Limited maximum output current (150mA)

Working Principles

The SP6205EM5-3-0/TR operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The regulator compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

SP6205EM5-3-0/TR finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to SP6205EM5-3-0/TR are: - LM1117-3.3 - MCP1702-3002E/TO - LP2985-33DBVR - AP2112K-3.3TRG1 - NCP1117ST33T3G

These alternatives offer similar functionality and specifications, providing flexibility in choosing the most suitable voltage regulator for specific applications.

Word count: 346 words

技術ソリューションにおける SP6205EM5-3-0/TR の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the input voltage range for SP6205EM5-3-0/TR?
    - The input voltage range for SP6205EM5-3-0/TR is typically 2.5V to 6.5V.

  2. What is the output voltage of SP6205EM5-3-0/TR?
    - The output voltage of SP6205EM5-3-0/TR is fixed at 3.0V.

  3. Can SP6205EM5-3-0/TR be used in battery-powered applications?
    - Yes, SP6205EM5-3-0/TR can be used in battery-powered applications due to its low input voltage requirement.

  4. Is SP6205EM5-3-0/TR suitable for use in portable devices?
    - Yes, SP6205EM5-3-0/TR is suitable for use in portable devices due to its small form factor and low power consumption.

  5. What is the typical output current capability of SP6205EM5-3-0/TR?
    - The typical output current capability of SP6205EM5-3-0/TR is 150mA.

  6. Does SP6205EM5-3-0/TR have built-in overcurrent protection?
    - Yes, SP6205EM5-3-0/TR has built-in overcurrent protection to safeguard the load and the regulator.

  7. Can SP6205EM5-3-0/TR be used in automotive applications?
    - Yes, SP6205EM5-3-0/TR can be used in automotive applications within its specified operating temperature range.

  8. What is the typical dropout voltage of SP6205EM5-3-0/TR?
    - The typical dropout voltage of SP6205EM5-3-0/TR is 300mV at 100mA load.

  9. Is SP6205EM5-3-0/TR suitable for powering sensitive analog circuits?
    - Yes, SP6205EM5-3-0/TR is suitable for powering sensitive analog circuits due to its low output noise.

  10. Can SP6205EM5-3-0/TR be used in conjunction with other voltage regulators?
    - Yes, SP6205EM5-3-0/TR can be used in conjunction with other voltage regulators to create multi-rail power systems.