EPCOS (TDK)
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
B72510T0250K072

B72510T0250K072

Product Overview

Category

The B72510T0250K072 belongs to the category of varistors, which are electronic components used to protect circuits from overvoltage conditions.

Use

This varistor is commonly used in electronic circuits to suppress voltage spikes and transient surges, thereby safeguarding sensitive components from damage.

Characteristics

  • High energy absorption capacity
  • Fast response time
  • Wide operating temperature range
  • Compact size

Package

The B72510T0250K072 varistor is typically available in a cylindrical package with lead wires for easy integration into circuit boards.

Essence

The essence of this varistor lies in its ability to rapidly dissipate excess energy during voltage surges, thereby protecting connected devices.

Packaging/Quantity

These varistors are usually packaged in reels or trays, with quantities varying based on manufacturer specifications.

Specifications

  • Model: B72510T0250K072
  • Voltage Rating: 25V
  • Maximum Allowable Voltage: 31V
  • Peak Current (8/20µs): 250A
  • Operating Temperature Range: -40°C to 85°C
  • Capacitance: 100pF

Detailed Pin Configuration

The B72510T0250K072 varistor typically features two lead wires for connection to the circuit. The pin configuration may vary slightly based on the manufacturer's design, but it generally follows a standard layout.

Functional Features

  • Voltage Clamping: The varistor clamps excessive voltage levels to protect downstream components.
  • Transient Suppression: Rapidly responds to transient voltage spikes, diverting excess energy away from the circuit.
  • Reliability: Provides consistent performance over a wide range of operating conditions.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage surges
  • Compact size for space-constrained applications
  • Wide operating temperature range

Disadvantages

  • Limited maximum voltage rating compared to some higher-rated varistors
  • Requires careful consideration of application voltage levels to ensure adequate protection

Working Principles

The B72510T0250K072 varistor operates based on the principle of nonlinear resistance, where its resistance decreases as the applied voltage increases. This characteristic allows it to effectively shunt excess current during overvoltage events.

Detailed Application Field Plans

Power Supplies

In power supply circuits, the B72510T0250K072 varistor can be used to protect sensitive electronics from voltage transients caused by lightning strikes or switching events.

Industrial Control Systems

For industrial control systems, these varistors provide essential surge protection to prevent damage to control modules and communication interfaces.

Automotive Electronics

In automotive applications, the B72510T0250K072 varistor safeguards onboard electronics from voltage fluctuations due to load dumps and other electrical disturbances.

Detailed and Complete Alternative Models

  • B72510T0500K072
  • B72510T0100K072
  • B72510T0350K072
  • B72510T0200K072

This comprehensive entry provides an in-depth understanding of the B72510T0250K072 varistor, covering its basic information, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

技術ソリューションにおける B72510T0250K072 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the B72510T0250K072 component used for in technical solutions?

    • The B72510T0250K072 is a ceramic transient voltage suppressor (TVS) diode used to protect sensitive electronic components from voltage spikes and transients.

  2. What is the maximum voltage rating of the B72510T0250K072?

    • The maximum voltage rating of the B72510T0250K072 is 25V.

  3. What is the peak pulse current handling capability of the B72510T0250K072?

    • The B72510T0250K072 can handle peak pulse currents up to 72A.

  4. How does the B72510T0250K072 protect electronic circuits?

    • The B72510T0250K072 diverts excessive voltage and current away from sensitive components, preventing damage from transient events.

  5. In what type of applications is the B72510T0250K072 commonly used?

    • The B72510T0250K072 is commonly used in power supplies, communication equipment, and automotive electronics to protect against voltage surges.

  6. What is the response time of the B72510T0250K072 during a transient event?

    • The B72510T0250K072 has a very fast response time, typically clamping the voltage within nanoseconds of a transient occurrence.

  7. Can the B72510T0250K072 be used in high-frequency applications?

    • Yes, the B72510T0250K072 is suitable for high-frequency applications due to its low capacitance and fast response time.

  8. Is the B72510T0250K072 RoHS compliant?

    • Yes, the B72510T0250K072 is RoHS compliant, making it suitable for use in environmentally conscious designs.

  9. What are the temperature specifications for the B72510T0250K072?

    • The B72510T0250K072 has an operating temperature range of -55°C to 150°C, making it suitable for a wide range of environments.

  10. Are there any specific layout or mounting considerations for the B72510T0250K072?

    • It is recommended to minimize the length of the connections to the B72510T0250K072 and to provide a low-impedance path to ground to optimize its performance.