EPCOS (TDK)
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
B72220S0600K101
詳細を表示 DataSheets

B72220S0600K101

Product Overview

Category

The B72220S0600K101 belongs to the category of varistors, which are electronic components used to protect circuits from excessive voltage.

Use

It is used to suppress transient voltage spikes and limit the voltage that can appear across an electrical component.

Characteristics

  • Voltage Regulation: The varistor regulates voltage by changing its resistance in response to the applied voltage.
  • Fast Response Time: It responds quickly to voltage surges, protecting sensitive electronic equipment.
  • High Energy Absorption Capacity: Capable of absorbing high levels of energy during transient events.
  • Reliability: Provides stable and reliable protection for electronic circuits.

Package

The B72220S0600K101 varistor is typically packaged in a cylindrical form with leads for easy installation on circuit boards.

Essence

The essence of the B72220S0600K101 varistor lies in its ability to protect electronic circuits from voltage surges and transients.

Packaging/Quantity

It is commonly available in reels or bulk packaging, with quantities varying based on manufacturer specifications.

Specifications

  • Part Number: B72220S0600K101
  • Maximum Allowable Voltage: 60V
  • Nominal Varistor Voltage: 22V
  • Peak Current Capability: 8000A
  • Operating Temperature Range: -40°C to 85°C
  • Lead Diameter: 0.6mm

Detailed Pin Configuration

The B72220S0600K101 varistor has two leads, typically denoted as the anode and cathode. The lead configuration allows for easy integration into circuit designs.

Functional Features

  • Voltage Clamping: When the voltage exceeds the varistor's threshold, it conducts current to limit the voltage across the circuit.
  • Transient Suppression: Effectively suppresses transient voltage spikes to protect connected devices.
  • Non-linear Response: Exhibits a non-linear voltage-current characteristic, providing effective protection over a wide range of voltages.

Advantages and Disadvantages

Advantages

  • Effective transient voltage suppression
  • Fast response time
  • High energy absorption capacity
  • Compact and easy to integrate into circuit designs

Disadvantages

  • Limited lifespan under repeated high-energy transient events
  • Susceptible to thermal runaway if subjected to prolonged overvoltage conditions

Working Principles

The B72220S0600K101 varistor operates based on the principle of voltage-dependent resistance. When the applied voltage exceeds the varistor's threshold, it begins to conduct, diverting excess current away from the protected circuit.

Detailed Application Field Plans

The B72220S0600K101 varistor finds application in various fields, including: - Power Supplies: Protects power supply circuits from voltage surges. - Telecommunications Equipment: Safeguards sensitive telecom components from transient events. - Industrial Control Systems: Used to protect control systems from electrical disturbances. - Consumer Electronics: Integrated into electronic devices to enhance surge protection.

Detailed and Complete Alternative Models

  • B72220S0271K101: Similar varistor with a lower nominal voltage rating.
  • B72220S0400K101: Varistor with a higher nominal voltage rating for different applications.
  • B72220S0800K101: Higher voltage variant suitable for industrial applications.

In conclusion, the B72220S0600K101 varistor offers effective transient voltage suppression and protection for electronic circuits, making it a valuable component in various industries and applications.

Word Count: 523

技術ソリューションにおける B72220S0600K101 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the B72220S0600K101?

    • The B72220S0600K101 is a varistor, also known as a voltage-dependent resistor, which is commonly used to protect electronic circuits from overvoltage conditions.

  2. What is the maximum voltage rating of the B72220S0600K101?

    • The maximum voltage rating of the B72220S0600K101 is 60V.

  3. What is the typical application of the B72220S0600K101?

    • The B72220S0600K101 is typically used in surge protection applications for electronic equipment, such as power supplies, communication systems, and industrial controls.

  4. How does the B72220S0600K101 provide overvoltage protection?

    • The B72220S0600K101 varistor conducts current when subjected to overvoltage, effectively diverting excess energy away from sensitive components and preventing damage.

  5. What are the key specifications of the B72220S0600K101?

    • The key specifications include a maximum continuous voltage rating of 50V, a maximum clamping voltage of 120V, and a peak current capability of 600A.

  6. Can the B72220S0600K101 be used in automotive applications?

    • Yes, the B72220S0600K101 is suitable for automotive applications where protection against transient voltage events is required.

  7. Is the B72220S0600K101 RoHS compliant?

    • Yes, the B72220S0600K101 is compliant with the Restriction of Hazardous Substances (RoHS) directive.

  8. What are the recommended mounting and soldering techniques for the B72220S0600K101?

    • The B72220S0600K101 can be mounted using standard through-hole soldering techniques, and care should be taken to avoid excessive mechanical stress during assembly.

  9. What are the temperature considerations for the B72220S0600K101?

    • The B72220S0600K101 has an operating temperature range of -40°C to +85°C, making it suitable for a wide range of environmental conditions.

  10. Are there any application notes or design guidelines available for using the B72220S0600K101 in technical solutions?

    • Yes, detailed application notes and design guidelines are provided by the manufacturer to assist engineers in implementing the B72220S0600K101 effectively in their technical solutions.