EPCOS (TDK)
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
B57560K0493A003

B57560K0493A003

Product Overview

Category

The B57560K0493A003 belongs to the category of electronic components, specifically a surface mount ferrite bead.

Use

It is used to suppress high-frequency noise in electronic circuits and prevent electromagnetic interference.

Characteristics

  • High impedance at high frequencies
  • Low DC resistance
  • Compact size for space-constrained applications

Package

The B57560K0493A003 is typically available in a surface mount package.

Essence

This ferrite bead serves as an effective filter to eliminate unwanted noise and interference in electronic circuits.

Packaging/Quantity

The B57560K0493A003 is commonly packaged in reels or trays, with quantities varying based on manufacturer specifications.

Specifications

  • Part Number: B57560K0493A003
  • Impedance: 480 Ohms @ 100 MHz
  • DC Resistance: 0.15 Ohms
  • Rated Current: 300 mA
  • Operating Temperature Range: -55°C to +125°C
  • Tolerance: ±25%

Detailed Pin Configuration

The B57560K0493A003 typically features two pins for surface mount soldering onto a printed circuit board. The pin configuration may vary based on the manufacturer's specifications.

Functional Features

  • Suppression of high-frequency noise
  • Prevention of electromagnetic interference
  • Improved signal integrity in electronic circuits

Advantages

  • Compact size for space-constrained designs
  • Effective noise suppression at high frequencies
  • Low DC resistance minimizes power loss

Disadvantages

  • Limited current handling capacity compared to larger inductors
  • Tolerance may impact precision in some applications

Working Principles

The B57560K0493A003 operates based on the principle of impedance mismatch, where it presents a high impedance at high frequencies, effectively filtering out unwanted noise and interference while allowing desired signals to pass through.

Detailed Application Field Plans

The B57560K0493A003 finds application in various electronic devices and systems, including: - Power supplies - Communication equipment - Consumer electronics - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  • B57237S0250M000: Surface mount ferrite bead with similar impedance characteristics
  • B82793C0475N201: Through-hole ferrite bead suitable for different mounting requirements
  • BLM18PG121SN1D: Chip ferrite bead with comparable performance in compact form factor

In conclusion, the B57560K0493A003 surface mount ferrite bead offers effective noise suppression and interference prevention in electronic circuits, making it a valuable component in various applications across different industries.

[Word count: 413]

技術ソリューションにおける B57560K0493A003 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the B57560K0493A003 component used for in technical solutions?

    • The B57560K0493A003 is a common-mode choke used to suppress electromagnetic interference in electronic circuits.

  2. What are the key specifications of the B57560K0493A003 component?

    • The B57560K0493A003 typically has an inductance of 49mH, a rated current of 0.5A, and a resistance of 3.5 ohms.

  3. How is the B57560K0493A003 component typically connected in a circuit?

    • The B57560K0493A003 is usually connected in series with the signal or power lines to filter out unwanted noise and interference.

  4. What are the typical applications of the B57560K0493A003 component?

    • The B57560K0493A003 is commonly used in power supplies, communication equipment, and other electronic devices to improve EMC performance.

  5. What are the temperature and voltage ratings for the B57560K0493A003 component?

    • The B57560K0493A003 is typically rated for operation within a temperature range of -40°C to +125°C and a voltage range of up to 50V.

  6. Are there any recommended layout considerations when using the B57560K0493A003 component?

    • It is advisable to keep the traces connecting the B57560K0493A003 as short as possible and to minimize any high-frequency loops in the layout.

  7. Can the B57560K0493A003 component be used in automotive applications?

    • Yes, the B57560K0493A003 is suitable for use in automotive electronics due to its robust construction and reliability.

  8. What are the potential failure modes of the B57560K0493A003 component?

    • Common failure modes include saturation at high currents, excessive heating under prolonged overload conditions, and mechanical damage.

  9. Is the B57560K0493A003 component RoHS compliant?

    • Yes, the B57560K0493A003 complies with the Restriction of Hazardous Substances (RoHS) directive.

  10. Where can I find detailed application notes and design guidelines for the B57560K0493A003 component?

    • Detailed application notes and design guidelines for the B57560K0493A003 can be found on the manufacturer's website or in the product datasheet.