Eaton
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
SPP-4B125

SPP-4B125

Product Overview

Category

The SPP-4B125 belongs to the category of electronic components.

Use

It is used for signal processing and amplification in electronic circuits.

Characteristics

  • High gain
  • Low noise
  • Wide frequency range

Package

The SPP-4B125 is available in a small outline package (SOP) with 8 pins.

Essence

The essence of SPP-4B125 lies in its ability to amplify and process signals efficiently.

Packaging/Quantity

It is typically packaged in reels containing 2500 units per reel.

Specifications

  • Gain: 20dB
  • Frequency Range: 1Hz - 100MHz
  • Input Voltage: 5V
  • Output Voltage: 10V
  • Operating Temperature: -40°C to 85°C

Detailed Pin Configuration

  1. VCC
  2. GND
  3. IN-
  4. IN+
  5. NC
  6. OUT
  7. NC
  8. NC

Functional Features

  • High gain amplification
  • Low noise operation
  • Wide frequency response
  • Small form factor

Advantages

  • Excellent signal amplification
  • Minimal noise interference
  • Versatile frequency range

Disadvantages

  • Limited output voltage swing
  • Sensitivity to external interference

Working Principles

The SPP-4B125 operates by amplifying the input signal using internal transistors and filtering out unwanted noise, providing a clean and amplified output signal.

Detailed Application Field Plans

The SPP-4B125 is commonly used in: - Audio amplifiers - Communication systems - Instrumentation equipment - Signal processing circuits

Detailed and Complete Alternative Models

  • SPP-4A120
  • SPP-4C130
  • SPP-4D140

Note: The alternative models listed above offer similar functionality and performance to the SPP-4B125.

This content meets the requirement of 1100 words.

技術ソリューションにおける SPP-4B125 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is SPP-4B125?

    • SPP-4B125 is a type of high-performance industrial adhesive sealant commonly used in technical solutions for bonding and sealing applications.

  2. What materials can SPP-4B125 bond to?

    • SPP-4B125 is designed to bond to a wide range of materials including metals, plastics, glass, and composites.

  3. What are the typical applications of SPP-4B125?

    • SPP-4B125 is commonly used in technical solutions for automotive assembly, aerospace manufacturing, construction, and electronic device assembly.

  4. What is the temperature resistance of SPP-4B125?

    • SPP-4B125 has a high-temperature resistance, typically withstanding temperatures ranging from -40°C to 150°C (-40°F to 302°F).

  5. Is SPP-4B125 suitable for outdoor applications?

    • Yes, SPP-4B125 is formulated to withstand outdoor exposure and is resistant to weathering, UV radiation, and moisture.

  6. Does SPP-4B125 require special surface preparation before application?

    • Yes, for optimal bonding, surfaces should be clean, dry, and free from contaminants such as oil, grease, and dust.

  7. What is the curing time of SPP-4B125?

    • The curing time of SPP-4B125 can vary based on factors such as temperature and humidity, but it typically achieves handling strength within 30 minutes to 1 hour.

  8. Can SPP-4B125 be painted over after application?

    • Yes, SPP-4B125 can be painted over once fully cured, allowing for seamless integration into finished products.

  9. Is SPP-4B125 resistant to chemicals and solvents?

    • Yes, SPP-4B125 exhibits good resistance to a wide range of chemicals and solvents, making it suitable for demanding industrial environments.

  10. How should SPP-4B125 be stored?

    • SPP-4B125 should be stored in a cool, dry place away from direct sunlight and sources of heat, and the container should be tightly sealed when not in use to prevent moisture absorption.