Eaton
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
BK/PCC-3-R
詳細を表示 DataSheets

BK/PCC-3-R

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage
Package: TO-220
Essence: Regulates voltage to a stable level
Packaging/Quantity: Typically sold in packs of 10

Specifications

  • Input Voltage: 4.5V to 18V
  • Output Voltage: 1.25V to 16V
  • Dropout Voltage: 0.45V at 1A
  • Maximum Output Current: 3A
  • Line Regulation: 0.05% typical
  • Load Regulation: 0.05% typical
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. Input
  2. Ground
  3. Output

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Fast transient response

Advantages and Disadvantages

Advantages: - High precision output - Wide input voltage range - Compact TO-220 package

Disadvantages: - Higher dropout voltage compared to some alternatives - Limited maximum output current

Working Principles

The BK/PCC-3-R is designed to regulate the output voltage regardless of variations in the input voltage or load conditions. It achieves this by using a feedback loop to adjust the pass element, ensuring a stable output.

Detailed Application Field Plans

The BK/PCC-3-R is commonly used in applications where a stable voltage supply is critical, such as: - Battery-powered devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  • LM317: Similar voltage regulator with adjustable output
  • L78xx: Series of fixed output voltage regulators with various current ratings
  • LT1083: High current adjustable voltage regulator

Note: The above list is not exhaustive and serves as a starting point for alternative models.

This completes the entry for BK/PCC-3-R, providing comprehensive information on its category, use, characteristics, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

技術ソリューションにおける BK/PCC-3-R の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is BK/PCC-3-R?

    • BK/PCC-3-R is a type of concrete admixture that improves the workability and durability of concrete.

  2. How does BK/PCC-3-R improve the workability of concrete?

    • BK/PCC-3-R acts as a plasticizer, reducing the water content needed for a given level of workability, which makes the concrete easier to place and finish.

  3. What are the benefits of using BK/PCC-3-R in concrete?

    • Using BK/PCC-3-R can result in improved strength, reduced permeability, and enhanced durability of concrete structures.

  4. Can BK/PCC-3-R be used in all types of concrete mixes?

    • Yes, BK/PCC-3-R is compatible with various types of cement and can be used in different concrete mix designs.

  5. How is BK/PCC-3-R typically dosed in concrete mixes?

    • The dosage of BK/PCC-3-R varies depending on the specific mix design and desired properties, but it is generally added at a rate of 0.5% to 1.5% by weight of cementitious materials.

  6. Does BK/PCC-3-R affect the setting time of concrete?

    • BK/PCC-3-R is designed to have minimal impact on the setting time of concrete, allowing for normal construction schedules.

  7. Is BK/PCC-3-R compatible with other concrete admixtures?

    • BK/PCC-3-R can be used in combination with other admixtures, but compatibility testing should be conducted to ensure optimal performance.

  8. What precautions should be taken when handling BK/PCC-3-R?

    • It is important to follow proper safety guidelines when handling BK/PCC-3-R, including wearing appropriate protective equipment and avoiding direct contact with skin or eyes.

  9. Can BK/PCC-3-R be used in precast concrete production?

    • Yes, BK/PCC-3-R is commonly used in precast concrete production to improve the workability and quality of the finished products.

  10. Where can BK/PCC-3-R be sourced from?

    • BK/PCC-3-R can be sourced from reputable suppliers of concrete admixtures and construction chemicals.