Diodes Incorporated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ZXBM1016ST20TA
詳細を表示 DataSheets

ZXBM1016ST20TA

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact size, low power consumption
  • Package: ST20 (20-pin Small Outline Transistor)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 1.2V to 15V
  • Output Current: Up to 1A
  • Quiescent Current: 50µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. COMP: Compensation Pin
  7. SS: Soft Start Pin
  8. PGND: Power Ground
  9. BST: Bootstrap Pin
  10. SW: Switching Node
  11. AGND: Analog Ground
  12. NC: No Connection
  13. NC: No Connection
  14. NC: No Connection
  15. NC: No Connection
  16. NC: No Connection
  17. NC: No Connection
  18. NC: No Connection
  19. NC: No Connection
  20. NC: No Connection

Functional Features

  • Wide input voltage range for versatile applications
  • High efficiency conversion for reduced power loss
  • Overcurrent protection for enhanced safety
  • Soft start function for smooth power-up
  • Adjustable output voltage for flexibility
  • Stable output voltage under varying load conditions

Advantages and Disadvantages

Advantages

  • Compact size allows for space-saving designs
  • Low power consumption for energy-efficient operation
  • Wide input voltage range accommodates various power sources
  • High efficiency reduces heat generation and extends battery life

Disadvantages

  • Limited output current may not be suitable for high-power applications
  • Requires external components for proper operation
  • Sensitive to input voltage fluctuations

Working Principles

The ZXBM1016ST20TA is a voltage regulator IC that converts an input voltage within the specified range into a stable output voltage. It utilizes a switching regulator topology to achieve high efficiency conversion. The feedback pin (FB) monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a constant output voltage. The enable pin (EN) controls the device's operation, allowing it to be turned on or off as needed.

Detailed Application Field Plans

The ZXBM1016ST20TA is commonly used in various applications where voltage regulation is required. Some of the typical application fields include:

  1. Battery-powered devices: Portable electronics, handheld instruments, and wireless communication devices benefit from the low power consumption and compact size of the ZXBM1016ST20TA.
  2. Automotive systems: The wide input voltage range and temperature tolerance make this IC suitable for automotive applications such as infotainment systems, lighting control, and power management.
  3. Industrial equipment: The stability and efficiency of the ZXBM1016ST20TA make it ideal for use in industrial automation, motor control, and power supply units.
  4. Home appliances: From smart home devices to kitchen appliances, the voltage regulation provided by this IC ensures reliable and efficient operation.

Detailed and Complete Alternative Models

  1. ZXBM1015ST20TA: Similar to ZXBM1016ST20TA but with a lower output current capability.
  2. ZXBM1017ST20TA: Similar to ZXBM1016ST20TA but with a higher output current capability.
  3. ZXBM1016ST16TA: Similar to ZXBM1016ST20TA but in a smaller 16-pin package.

These alternative models offer similar functionality and characteristics, allowing designers to choose the most suitable option based on their specific requirements.

Word count: 511 words

技術ソリューションにおける ZXBM1016ST20TA の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ZXBM1016ST20TA in technical solutions:

  1. Q: What is ZXBM1016ST20TA? A: ZXBM1016ST20TA is a voltage monitor and reset IC designed for use in various technical solutions.

  2. Q: What is the purpose of ZXBM1016ST20TA? A: The purpose of ZXBM1016ST20TA is to monitor the voltage level of a power supply and provide a reset signal when the voltage falls below a certain threshold.

  3. Q: How does ZXBM1016ST20TA work? A: ZXBM1016ST20TA continuously monitors the voltage level using an internal voltage reference and comparator circuit. When the voltage drops below the set threshold, it triggers the reset output.

  4. Q: What is the voltage range supported by ZXBM1016ST20TA? A: ZXBM1016ST20TA supports a wide voltage range from 0.8V to 5.5V.

  5. Q: Can ZXBM1016ST20TA be used in battery-powered applications? A: Yes, ZXBM1016ST20TA can be used in battery-powered applications as it operates within a low voltage range and has low power consumption.

  6. Q: Is ZXBM1016ST20TA suitable for automotive applications? A: Yes, ZXBM1016ST20TA is suitable for automotive applications as it can withstand high temperatures and has built-in protection features.

  7. Q: Can ZXBM1016ST20TA be used in industrial control systems? A: Absolutely, ZXBM1016ST20TA is commonly used in industrial control systems to ensure stable power supply and prevent system malfunctions.

  8. Q: Does ZXBM1016ST20TA have any built-in delay for the reset signal? A: Yes, ZXBM1016ST20TA has a programmable reset delay feature to prevent false triggering due to voltage fluctuations.

  9. Q: Can multiple ZXBM1016ST20TA devices be used in parallel for redundancy? A: Yes, multiple ZXBM1016ST20TA devices can be used in parallel to provide redundancy and enhance system reliability.

  10. Q: Are there any application notes or reference designs available for ZXBM1016ST20TA? A: Yes, the manufacturer provides application notes and reference designs that can help users implement ZXBM1016ST20TA effectively in their technical solutions.

Please note that these answers are general and may vary depending on the specific requirements and use cases of your technical solution.