Diodes Incorporated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ZXBM1004Q16TC
詳細を表示 DataSheets

ZXBM1004Q16TC

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: QFN (Quad Flat No-leads)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to 3.3V
  • Maximum Output Current: 1A
  • Quiescent Current: 30µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The ZXBM1004Q16TC has the following pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. EN: Enable Pin
  4. FB: Feedback Pin
  5. VOUT: Output Voltage
  6. PG: Power Good Indicator

Functional Features

  • High efficiency voltage regulation
  • Low power consumption in standby mode
  • Overcurrent protection
  • Thermal shutdown protection
  • Power good indicator for output status monitoring

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power wastage
  • Wide input voltage range allows for versatile applications
  • Compact package size saves board space
  • Power good indicator enhances system reliability

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Operating temperature range may restrict usage in extreme environments

Working Principles

The ZXBM1004Q16TC is a voltage regulator that takes an input voltage within the range of 2.7V to 5.5V and provides a regulated output voltage between 0.6V and 3.3V. It achieves high efficiency by utilizing a switching regulator topology. The device monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a stable output. It also incorporates overcurrent protection and thermal shutdown features to ensure safe operation.

Detailed Application Field Plans

The ZXBM1004Q16TC is commonly used in various applications, including:

  1. Battery-powered devices
  2. Portable electronics
  3. IoT (Internet of Things) devices
  4. Wearable devices
  5. Embedded systems

Detailed and Complete Alternative Models

  • ZXBM1004Q16TD: Similar specifications but with a different package (DIP)
  • ZXBM1004Q16TE: Higher maximum output current (1.5A) but slightly lower efficiency
  • ZXBM1004Q16TF: Lower quiescent current (20µA) but higher cost

These alternative models provide flexibility based on specific requirements and constraints.

Word count: 250 words

技術ソリューションにおける ZXBM1004Q16TC の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ZXBM1004Q16TC in technical solutions:

  1. Question: What is ZXBM1004Q16TC?
    Answer: ZXBM1004Q16TC is a specific model of integrated circuit (IC) that is commonly used in technical solutions.

  2. Question: What is the purpose of ZXBM1004Q16TC?
    Answer: The purpose of ZXBM1004Q16TC is to provide voltage regulation and power management capabilities in various electronic devices.

  3. Question: What are the key features of ZXBM1004Q16TC?
    Answer: Some key features of ZXBM1004Q16TC include high efficiency, low standby power consumption, over-temperature protection, and short-circuit protection.

  4. Question: In which applications can ZXBM1004Q16TC be used?
    Answer: ZXBM1004Q16TC can be used in a wide range of applications such as consumer electronics, industrial automation, automotive systems, and power supplies.

  5. Question: How does ZXBM1004Q16TC regulate voltage?
    Answer: ZXBM1004Q16TC uses a feedback mechanism to continuously monitor and adjust the output voltage to maintain a stable level.

  6. Question: Can ZXBM1004Q16TC handle high current loads?
    Answer: Yes, ZXBM1004Q16TC is designed to handle high current loads and can provide sufficient power for demanding applications.

  7. Question: Does ZXBM1004Q16TC support multiple input voltages?
    Answer: Yes, ZXBM1004Q16TC supports a wide input voltage range, allowing it to be used with different power sources.

  8. Question: Is ZXBM1004Q16TC easy to integrate into existing designs?
    Answer: Yes, ZXBM1004Q16TC is available in a compact package and has a simple interface, making it relatively easy to integrate into existing designs.

  9. Question: What are the typical efficiency levels of ZXBM1004Q16TC?
    Answer: ZXBM1004Q16TC typically achieves high efficiency levels, often exceeding 90%, which helps minimize power losses.

  10. Question: Are there any specific design considerations when using ZXBM1004Q16TC?
    Answer: It is important to consider factors such as input/output voltage requirements, load characteristics, thermal management, and PCB layout guidelines when designing with ZXBM1004Q16TC.

Please note that these questions and answers are general in nature and may vary depending on the specific application and requirements.