PI7VD9004AAHFDIE

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Voltage Level Shifter
• Characteristics: High-speed, low-power consumption
• Package: Small Outline Integrated Circuit (SOIC)
• Essence: Translates voltage levels between different logic families
• Packaging/Quantity: Typically sold in reels or tubes containing multiple units

Specifications

• Supply Voltage Range: 1.2V to 3.6V
• Logic Input Voltage Range: 0V to VCC
• Logic Output Voltage Range: 0V to VCC
• Maximum Operating Frequency: 100 MHz
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PI7VD9004AAHFDIE IC has a total of 8 pins: 1. VCC: Power supply input 2. GND: Ground reference 3. A1: Logic input/output pin 1 4. A2: Logic input/output pin 2 5. B1: Logic input/output pin 3 6. B2: Logic input/output pin 4 7. OE: Output enable control pin 8. NC: No connection (unused pin)

Functional Features

• Voltage Translation: The PI7VD9004AAHFDIE can translate voltage levels between different logic families, allowing seamless communication between devices operating at different voltage levels.
• Bidirectional Operation: It supports bidirectional voltage level shifting, enabling data transmission in both directions.
• High-Speed Operation: With a maximum operating frequency of 100 MHz, it is suitable for high-speed applications.
• Low-Power Consumption: The IC is designed to minimize power consumption, making it ideal for battery-powered devices.

Advantages and Disadvantages

Advantages: - Wide supply voltage range allows compatibility with various systems. - Bidirectional operation simplifies circuit design. - High-speed operation enables efficient data transfer. - Low-power consumption prolongs battery life.

Disadvantages: - Limited to voltage level shifting and does not provide additional functionality. - May require external components for specific applications.

Working Principles

The PI7VD9004AAHFDIE utilizes a combination of MOSFET transistors and level-shifting circuits to translate voltage levels between different logic families. When an input signal is received, the IC adjusts the voltage level accordingly and outputs the translated signal.

Detailed Application Field Plans

The PI7VD9004AAHFDIE is commonly used in various electronic systems where voltage level translation is required. Some typical application fields include: 1. Microcontrollers: Facilitates communication between microcontrollers operating at different voltage levels. 2. Communication Interfaces: Enables compatibility between devices with different logic voltage requirements, such as UART, I2C, and SPI interfaces. 3. Sensor Networks: Allows integration of sensors operating at different voltage levels into a single network.

Detailed and Complete Alternative Models

1. TXB0104: Similar voltage level shifter IC with 4 bidirectional channels.
2. SN74LVC4245A: Octal bus transceiver with voltage level translation capability.
3. PCA9306: Dual bidirectional I2C-bus and SMBus voltage level translator.

Note: This entry provides a brief overview of the PI7VD9004AAHFDIE IC. For more detailed information, please refer to the datasheet provided by the manufacturer.

Word Count: 335