PI6C49016ZDIE
Overview
Category
PI6C49016ZDIE belongs to the category of integrated circuits (ICs).
Use
It is commonly used in electronic devices for clock generation and distribution.
Characteristics
- Provides precise clock signals
- Supports various clock frequencies
- Low power consumption
- Compact package size
Package
PI6C49016ZDIE is available in a small form factor package, typically a surface mount package.
Essence
The essence of PI6C49016ZDIE lies in its ability to generate and distribute accurate clock signals within electronic systems.
Packaging/Quantity
This product is typically packaged in reels or trays, with a specified quantity per package.
Specifications and Parameters
- Input voltage range: 2.5V - 3.3V
- Operating temperature range: -40°C to +85°C
- Clock frequency range: 1MHz - 200MHz
- Output logic levels: CMOS/TTL compatible
Pin Configuration
The detailed pin configuration of PI6C49016ZDIE can be found in the following table:
| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | VDD | Power supply voltage | | 2 | GND | Ground | | 3 | CLKIN | Input clock signal | | 4 | CLKOUT | Output clock signal | | 5 | OE | Output enable control | | 6 | NC | No connection | | 7 | NC | No connection | | 8 | NC | No connection |
Functional Characteristics
- Generates stable clock signals based on the input clock
- Provides output enable control for easy integration into systems
- Supports multiple output frequencies
- Low jitter and phase noise
Advantages and Disadvantages
Advantages
- Precise clock generation
- Wide operating temperature range
- Low power consumption
- Compact package size
Disadvantages
- Limited output frequency range
- No built-in frequency multiplication/division capabilities
Applicable Range of Products
PI6C49016ZDIE is suitable for use in a wide range of electronic devices that require accurate clock signals, such as: - Microcontrollers - Digital signal processors - Communication systems - Networking equipment
Working Principles
The working principle of PI6C49016ZDIE involves taking an input clock signal and generating stable output clock signals with the desired frequency. It achieves this through internal circuitry that divides or multiplies the input clock frequency based on user configuration.
Detailed Application Field Plans
PI6C49016ZDIE can be applied in various fields, including but not limited to: 1. Embedded systems: Providing precise timing for microcontrollers and other embedded devices. 2. Telecommunications: Ensuring accurate clock synchronization in communication systems. 3. Industrial automation: Facilitating precise timing in industrial control systems. 4. Automotive electronics: Supporting reliable clock signals in automotive applications. 5. Consumer electronics: Enabling accurate timing in consumer devices like TVs and audio systems.
Detailed Alternative Models
Some alternative models to PI6C49016ZDIE include: - PI6C557-03ZLEX - PI6C557-04ZLEX - PI6C557-05ZLEX - PI6C557-06ZLEX - PI6C557-07ZLEX
5 Common Technical Questions and Answers
Q: What is the maximum output frequency supported by PI6C49016ZDIE? A: The maximum output frequency is 200MHz.
Q: Can I use this IC with a 5V power supply? A: No, the recommended input voltage range is 2.5V - 3.3V.
Q: Does PI6C49016ZDIE support frequency multiplication? A: No, it does not have built-in frequency multiplication capabilities.
Q: What is the typical power consumption of this IC? A: The typical power consumption is low, ensuring energy efficiency.
Q: Can I use PI6C49016ZDIE in automotive applications? A: Yes, it is suitable for automotive electronics and can provide reliable clock signals.
This concludes the encyclopedia entry for PI6C49016ZDIE.