Diodes Incorporated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
PI3B3125LE
詳細を表示 DataSheets

PI3B3125LE

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Signal Switch
  • Characteristics: High-speed, Low-power consumption
  • Package: 16-pin QFN (Quad Flat No-Lead)
  • Essence: Efficient signal routing and switching
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 1.65V to 3.6V
  • Operating Temperature: -40°C to +85°C
  • Switching Frequency: Up to 10 GHz
  • On-Resistance: 2.5Ω (typical)
  • Off-Isolation: -30dB (typical)
  • Insertion Loss: -0.4dB (typical)
  • Control Voltage: 0V or 3.3V

Detailed Pin Configuration

The PI3B3125LE has a total of 16 pins, as follows:

  1. Pin 1: Control Input A
  2. Pin 2: Control Input B
  3. Pin 3: Ground
  4. Pin 4: Channel 1 Output
  5. Pin 5: Channel 1 Input
  6. Pin 6: VCC
  7. Pin 7: Channel 2 Input
  8. Pin 8: Channel 2 Output
  9. Pin 9: Ground
  10. Pin 10: Channel 3 Output
  11. Pin 11: Channel 3 Input
  12. Pin 12: Control Input C
  13. Pin 13: Control Input D
  14. Pin 14: Ground
  15. Pin 15: Channel 4 Output
  16. Pin 16: Channel 4 Input

Functional Features

  • Efficient signal routing and switching between four channels
  • Low power consumption for extended battery life in portable devices
  • High-speed operation enables seamless data transmission
  • Wide operating voltage range for compatibility with various systems
  • Excellent signal integrity with low insertion loss and off-isolation

Advantages and Disadvantages

Advantages

  • High-speed switching capability
  • Low power consumption
  • Compact package size
  • Wide operating voltage range
  • Good signal integrity

Disadvantages

  • Limited number of channels (only four)
  • Relatively high on-resistance compared to some alternatives

Working Principles

The PI3B3125LE is designed to route and switch signals between different channels. It operates based on the control inputs provided to the corresponding pins. When the control inputs are set to a specific logic level, the corresponding channel is connected, allowing the signal to pass through. The IC ensures minimal signal degradation by maintaining low insertion loss and off-isolation.

Detailed Application Field Plans

The PI3B3125LE finds applications in various fields where signal routing and switching are required. Some potential application areas include:

  1. Communication Systems: Used for signal selection and routing in wireless communication devices.
  2. Test and Measurement Equipment: Enables flexible signal routing in testing setups.
  3. Audio/Video Switching: Facilitates seamless switching between audio/video sources in multimedia systems.
  4. Industrial Automation: Provides signal routing capabilities in control systems.
  5. Medical Devices: Used for signal switching in medical equipment.

Detailed and Complete Alternative Models

  1. PI3B3245LE: 8-channel bidirectional switch with similar characteristics and package.
  2. PI3B3257LE: 4-channel multiplexer/demultiplexer with similar characteristics and package.
  3. PI3B3126LE: 4-channel analog switch with lower on-resistance.

These alternative models offer similar functionality and can be considered as substitutes for the PI3B3125LE in specific applications.

Word count: 422 words

技術ソリューションにおける PI3B3125LE の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of PI3B3125LE in technical solutions:

  1. Q: What is PI3B3125LE? A: PI3B3125LE is a specific type of integrated circuit (IC) commonly used for signal switching and multiplexing applications.

  2. Q: What are the key features of PI3B3125LE? A: Some key features of PI3B3125LE include low ON resistance, wide voltage range compatibility, high bandwidth, and low power consumption.

  3. Q: In what types of technical solutions can PI3B3125LE be used? A: PI3B3125LE can be used in various technical solutions such as data communication systems, networking equipment, industrial automation, and consumer electronics.

  4. Q: How does PI3B3125LE help in signal switching applications? A: PI3B3125LE provides multiple channels for signal routing, allowing users to switch between different input/output paths efficiently.

  5. Q: Can PI3B3125LE handle both analog and digital signals? A: Yes, PI3B3125LE is designed to handle both analog and digital signals, making it versatile for different applications.

  6. Q: What is the voltage range supported by PI3B3125LE? A: PI3B3125LE typically supports a wide voltage range, often ranging from 1.65V to 5.5V, ensuring compatibility with various systems.

  7. Q: Does PI3B3125LE have any built-in protection features? A: Yes, PI3B3125LE usually includes built-in ESD (electrostatic discharge) protection, which helps safeguard the IC against potential damage.

  8. Q: Can PI3B3125LE be used in high-speed data transmission applications? A: Yes, PI3B3125LE is designed to support high bandwidths, making it suitable for high-speed data transmission applications.

  9. Q: What is the power consumption of PI3B3125LE? A: PI3B3125LE typically has low power consumption, which helps in reducing overall energy usage in electronic systems.

  10. Q: Are there any specific design considerations when using PI3B3125LE? A: It is important to consider factors such as signal integrity, PCB layout, and proper decoupling techniques to ensure optimal performance when using PI3B3125LE.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of PI3B3125LE.