Diodes Incorporated
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
PAM8006ATR_04
詳細を表示 DataSheets

PAM8006ATR_04

Product Overview

Category

PAM8006ATR_04 belongs to the category of integrated audio amplifiers.

Use

This product is primarily used for amplifying audio signals in various electronic devices such as smartphones, tablets, portable media players, and other consumer electronics.

Characteristics

  • High-quality audio amplification
  • Compact size
  • Low power consumption
  • Wide input voltage range
  • Thermal and short-circuit protection

Package

PAM8006ATR_04 is available in a small outline package (SOP) which ensures easy integration into different circuit designs.

Essence

The essence of PAM8006ATR_04 lies in its ability to provide efficient and reliable audio amplification while maintaining a compact form factor.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each reel/tube containing a specific quantity of PAM8006ATR_04 units. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 2.5V - 5.5V
  • Output Power: 3W per channel (at 4Ω load, 5V supply)
  • Total Harmonic Distortion (THD): <0.1% (at 1W, 1kHz)
  • Signal-to-Noise Ratio (SNR): >90dB
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PAM8006ATR_04 has a total of 16 pins, each serving a specific function. Here is the detailed pin configuration:

  1. VDD: Power supply positive terminal
  2. GND: Ground reference
  3. SD: Shutdown control input
  4. INL: Left channel audio input
  5. INR: Right channel audio input
  6. VREF: Reference voltage input
  7. BYP: Bypass capacitor connection
  8. NC: No connection
  9. PVDD: Power supply positive terminal for the output stage
  10. PGND: Ground reference for the output stage
  11. OUTL: Left channel audio output
  12. OUTR: Right channel audio output
  13. FB: Feedback pin
  14. MUTE: Mute control input
  15. STBY: Standby control input
  16. NC: No connection

Functional Features

  • High-efficiency Class D amplifier
  • Low quiescent current consumption
  • Short-circuit and thermal protection
  • Pop noise suppression during power-on/off transitions
  • Built-in mute and standby modes for power management

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices
  • Efficient power consumption prolongs battery life in portable devices
  • High-quality audio amplification ensures excellent sound reproduction
  • Thermal and short-circuit protection safeguards the amplifier and connected components

Disadvantages

  • Limited output power compared to larger audio amplifiers
  • May require additional external components for optimal performance in certain applications

Working Principles

The PAM8006ATR_04 utilizes a Class D amplifier architecture, which efficiently converts the input audio signal into a high-power output signal. It employs pulse width modulation (PWM) techniques to achieve high efficiency while minimizing power dissipation.

Detailed Application Field Plans

The PAM8006ATR_04 finds applications in various electronic devices where audio amplification is required. Some potential application fields include: - Smartphones and tablets - Portable media players - Bluetooth speakers - Gaming consoles - Automotive infotainment systems

Detailed and Complete Alternative Models

  1. PAM8403: Similar compact audio amplifier with 3W output power per channel.
  2. TPA3116D2: Higher power Class D audio amplifier with 50W output power per channel.
  3. LM386: Low-power audio amplifier suitable for battery-powered applications.

These alternative models offer different features and specifications, allowing designers to choose the most suitable option based on their specific requirements.

Word count: 560 words

技術ソリューションにおける PAM8006ATR_04 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of PAM8006ATR_04 in technical solutions:

  1. Q: What is the PAM8006ATR_04? A: The PAM8006ATR_04 is a high-efficiency Class-D audio amplifier integrated circuit (IC) designed for various audio applications.

  2. Q: What is the power output of the PAM8006ATR_04? A: The PAM8006ATR_04 can deliver up to 20 watts per channel into a 4-ohm load or 10 watts per channel into an 8-ohm load.

  3. Q: What is the input voltage range for the PAM8006ATR_04? A: The PAM8006ATR_04 has an input voltage range of 2.5V to 5.5V, making it compatible with a wide range of power supply options.

  4. Q: Can the PAM8006ATR_04 be used in portable devices? A: Yes, the PAM8006ATR_04 is suitable for use in portable devices such as smartphones, tablets, and portable speakers due to its low power consumption and small form factor.

  5. Q: Does the PAM8006ATR_04 require external components for operation? A: Yes, the PAM8006ATR_04 requires a few external components such as capacitors, resistors, and inductors to function properly.

  6. Q: What is the efficiency of the PAM8006ATR_04? A: The PAM8006ATR_04 offers high efficiency, typically above 90%, which helps in reducing power consumption and heat dissipation.

  7. Q: Can the PAM8006ATR_04 drive both speakers and headphones? A: Yes, the PAM8006ATR_04 can drive both speakers and headphones, making it versatile for various audio applications.

  8. Q: Is the PAM8006ATR_04 compatible with different audio input sources? A: Yes, the PAM8006ATR_04 is compatible with a wide range of audio input sources such as line-level signals, digital audio interfaces, and Bluetooth modules.

  9. Q: Does the PAM8006ATR_04 have built-in protection features? A: Yes, the PAM8006ATR_04 incorporates various protection features like over-temperature protection, over-current protection, and short-circuit protection to ensure safe operation.

  10. Q: Are there any application notes or reference designs available for the PAM8006ATR_04? A: Yes, the manufacturer provides application notes and reference designs that can help in implementing the PAM8006ATR_04 in different technical solutions. These resources offer guidance on PCB layout, component selection, and circuit design considerations.

Please note that the answers provided here are general and may vary depending on specific implementation requirements. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.