Cypress Semiconductor Corp
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
S70GL02GP11FFIR20
詳細を表示 DataSheets

S70GL02GP11FFIR20

Product Overview

  • Category: Flash Memory
  • Use: Data storage and retrieval in electronic devices
  • Characteristics: High capacity, non-volatile, fast read/write speeds
  • Package: Integrated Circuit (IC)
  • Essence: Non-volatile memory technology for long-term data storage
  • Packaging/Quantity: Typically sold in trays or reels containing multiple units

Specifications

  • Model: S70GL02GP11FFIR20
  • Capacity: 2 gigabytes (GB)
  • Interface: Parallel NOR Flash
  • Operating Voltage: 3.0 to 3.6 volts
  • Access Time: 90 nanoseconds (ns)
  • Operating Temperature Range: -40°C to +85°C
  • Data Retention: Up to 20 years
  • Package Type: Fine-pitch Ball Grid Array (FBGA)
  • Pin Count: 64 pins

Detailed Pin Configuration

  1. VCC (Power Supply)
  2. A0-A18 (Address Inputs)
  3. DQ0-DQ15 (Data Input/Output)
  4. WE# (Write Enable)
  5. CE# (Chip Enable)
  6. OE# (Output Enable)
  7. RESET# (Reset)
  8. WP#/ACC (Write Protect/Acceleration)
  9. RY/BY# (Ready/Busy)
  10. RP#/ACC (Read Protect/Acceleration)
  11. VSS (Ground)

(Note: The pin configuration may vary depending on the specific package variant.)

Functional Features

  • High-speed read and write operations
  • Sector erase and byte programming capabilities
  • Hardware and software protection mechanisms
  • Low power consumption
  • Advanced error correction techniques
  • Support for various industry-standard interfaces

Advantages and Disadvantages

Advantages: - Large storage capacity - Fast data access - Non-volatile memory (retains data even without power) - Reliable and durable - Suitable for a wide range of electronic devices

Disadvantages: - Higher cost compared to other memory technologies - Limited write endurance (number of erase/write cycles)

Working Principles

The S70GL02GP11FFIR20 utilizes NOR flash memory technology. It stores data in a grid of memory cells, where each cell consists of a floating-gate transistor. The presence or absence of an electrical charge on the floating gate determines the stored data. To read or write data, the appropriate voltage levels are applied to the control pins, enabling the transfer of data between the memory cells and external devices.

Detailed Application Field Plans

The S70GL02GP11FFIR20 is widely used in various electronic devices, including:

  1. Solid-state drives (SSDs)
  2. Embedded systems
  3. Automotive electronics
  4. Industrial control systems
  5. Networking equipment
  6. Consumer electronics (e.g., digital cameras, gaming consoles)

Its high capacity, fast access times, and reliability make it suitable for applications that require large amounts of non-volatile data storage.

Detailed and Complete Alternative Models

  1. S29GL01GP11TFI010 - 1GB Parallel NOR Flash Memory
  2. S34ML02G200TFI000 - 2GB Serial NOR Flash Memory
  3. MT29F2G08ABAEAWP - 2GB NAND Flash Memory
  4. W25Q128JVSIQ - 128MB Serial NOR Flash Memory
  5. MX25L25635FMI-10G - 32MB Serial NOR Flash Memory

(Note: The alternative models listed above are just a few examples and not an exhaustive list.)

This concludes the encyclopedia entry for the S70GL02GP11FFIR20 flash memory.

技術ソリューションにおける S70GL02GP11FFIR20 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of S70GL02GP11FFIR20 in technical solutions:

  1. Q: What is the S70GL02GP11FFIR20? A: The S70GL02GP11FFIR20 is a specific model of NAND flash memory chip manufactured by Cypress Semiconductor.

  2. Q: What are the key features of the S70GL02GP11FFIR20? A: The key features include a capacity of 2 gigabits (256 megabytes), a parallel interface, fast access times, and high reliability.

  3. Q: What are some typical applications for the S70GL02GP11FFIR20? A: The S70GL02GP11FFIR20 is commonly used in various embedded systems, such as automotive electronics, industrial control systems, and consumer electronics.

  4. Q: What is the operating voltage range of the S70GL02GP11FFIR20? A: The S70GL02GP11FFIR20 operates at a voltage range of 2.7V to 3.6V.

  5. Q: What is the maximum data transfer rate supported by the S70GL02GP11FFIR20? A: The S70GL02GP11FFIR20 supports a maximum data transfer rate of up to 40 megabytes per second.

  6. Q: Can the S70GL02GP11FFIR20 be easily integrated into existing systems? A: Yes, the S70GL02GP11FFIR20 is designed to be compatible with standard industry interfaces, making it relatively easy to integrate into existing systems.

  7. Q: Does the S70GL02GP11FFIR20 support hardware or software data protection features? A: Yes, the S70GL02GP11FFIR20 supports various hardware and software data protection features, such as block locking, password protection, and error correction codes.

  8. Q: What is the expected lifespan of the S70GL02GP11FFIR20? A: The S70GL02GP11FFIR20 has a high endurance rating, typically lasting for millions of program/erase cycles, ensuring long-term reliability.

  9. Q: Can the S70GL02GP11FFIR20 operate in extreme temperature conditions? A: Yes, the S70GL02GP11FFIR20 is designed to operate reliably in a wide temperature range, typically from -40°C to +85°C.

  10. Q: Are there any specific design considerations when using the S70GL02GP11FFIR20? A: It is important to consider factors such as power supply stability, signal integrity, and proper grounding techniques when designing with the S70GL02GP11FFIR20 to ensure optimal performance and reliability.

Please note that these answers are general and may vary depending on the specific requirements and implementation of the technical solution.