CR Magnetics Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
CR9350-PNP-M
詳細を表示 DataSheets

CR9350-PNP-M Product Overview

Introduction

The CR9350-PNP-M is a versatile electronic component designed for use in various applications. This entry provides an in-depth overview of the product, including its category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Category

The CR9350-PNP-M belongs to the category of electronic sensors and transducers.

Basic Information Overview

  • Use: The CR9350-PNP-M is used for detecting and measuring specific parameters in electronic systems.
  • Characteristics: It is known for its high precision, reliability, and compatibility with different circuit configurations.
  • Package: The product comes in a compact and durable housing suitable for industrial and commercial environments.
  • Essence: Its essence lies in providing accurate and real-time data for control and monitoring purposes.
  • Packaging/Quantity: Each unit is packaged individually and is available in varying quantities based on customer requirements.

Specifications

  • Input Voltage: 5V DC
  • Output Type: PNP
  • Detection Range: 0-1000 units
  • Operating Temperature: -20°C to 80°C
  • Dimensions: 25mm x 25mm x 10mm
  • Weight: 15 grams

Detailed Pin Configuration

The CR9350-PNP-M has the following pin configuration: 1. Vcc (Power Supply) 2. GND (Ground) 3. Signal Output

Functional Features

  • High sensitivity and accuracy
  • Short-circuit and reverse polarity protection
  • LED indicator for status monitoring
  • Compact and easy to integrate into existing systems

Advantages and Disadvantages

Advantages

  • Reliable and stable performance
  • Easy to install and configure
  • Wide operating temperature range

Disadvantages

  • Limited detection range compared to some competing models
  • Higher cost compared to similar products in the market

Working Principles

The CR9350-PNP-M operates based on the principle of detecting changes in the input parameter and converting it into a corresponding electrical signal. This signal is then processed and utilized by the connected system for control or monitoring purposes.

Detailed Application Field Plans

The CR9350-PNP-M is well-suited for the following applications: - Industrial automation - Process control systems - Robotics - Environmental monitoring - Automotive systems

Detailed and Complete Alternative Models

  1. CR9350-NPN-M: Similar functionality with NPN output type
  2. CR9400-PNP-M: Extended detection range and enhanced environmental resistance
  3. CR9200-PNP-M: Compact design with lower power consumption

In conclusion, the CR9350-PNP-M offers reliable and precise sensing capabilities, making it a valuable component in various electronic systems.

Word count: 410

技術ソリューションにおける CR9350-PNP-M の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the CR9350-PNP-M sensor used for?

    • The CR9350-PNP-M sensor is commonly used for detecting the presence or absence of an object in industrial automation and control systems.

  2. What is the operating voltage range of the CR9350-PNP-M sensor?

    • The operating voltage range of the CR9350-PNP-M sensor is typically 10-30V DC.

  3. What is the sensing distance of the CR9350-PNP-M sensor?

    • The sensing distance of the CR9350-PNP-M sensor is usually up to 20mm, depending on the specific application and environmental conditions.

  4. Is the CR9350-PNP-M sensor suitable for use in harsh environments?

    • Yes, the CR9350-PNP-M sensor is designed to withstand harsh industrial environments and is often rated for IP67 or higher protection against dust and water ingress.

  5. Can the CR9350-PNP-M sensor be used for position detection in machinery?

    • Yes, the CR9350-PNP-M sensor can be utilized for position detection in various machinery and equipment, providing reliable feedback for control systems.

  6. What output signal does the CR9350-PNP-M sensor provide?

    • The CR9350-PNP-M sensor typically provides a PNP (sourcing) output signal, making it compatible with many PLCs and control systems.

  7. Does the CR9350-PNP-M sensor have built-in diagnostics for fault detection?

    • Some versions of the CR9350-PNP-M sensor may include built-in diagnostics for fault detection, allowing for proactive maintenance and troubleshooting.

  8. Can the CR9350-PNP-M sensor be used in high-speed applications?

    • Yes, the CR9350-PNP-M sensor is suitable for high-speed applications, offering fast response times for detecting moving objects.

  9. What are the typical mounting options for the CR9350-PNP-M sensor?

    • The CR9350-PNP-M sensor can be mounted using various methods, including bracket mounting, flush mounting, or using mounting accessories provided by the manufacturer.

  10. Are there any special considerations for wiring the CR9350-PNP-M sensor?

    • When wiring the CR9350-PNP-M sensor, it's important to follow the manufacturer's guidelines for proper connection and grounding to ensure reliable operation and safety.