QD Devices Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ADR510ARTZ-R2
詳細を表示 DataSheets

ADR510ARTZ-R2

Product Overview

Category: Integrated Circuits (ICs)

Use: Voltage References

Characteristics: - High accuracy - Low temperature coefficient - Low dropout voltage - Low noise - Wide operating temperature range

Package: SOT-23

Essence: ADR510ARTZ-R2 is a precision voltage reference IC that provides a stable and accurate voltage output.

Packaging/Quantity: The ADR510ARTZ-R2 is available in tape and reel packaging, with 3000 units per reel.

Specifications

  • Output Voltage Range: 1.25V to 5.0V
  • Initial Accuracy: ±0.05%
  • Temperature Coefficient: 10ppm/°C
  • Dropout Voltage: 300mV
  • Operating Temperature Range: -40°C to +125°C
  • Supply Voltage Range: 2.7V to 18V
  • Quiescent Current: 120µA

Detailed Pin Configuration

The ADR510ARTZ-R2 has three pins:

  1. VOUT: Output Voltage Pin
  2. GND: Ground Pin
  3. VIN: Input Voltage Pin

Functional Features

  • High accuracy and stability over a wide temperature range
  • Low dropout voltage allows for operation in low-power applications
  • Low noise output ensures minimal interference in sensitive circuits
  • Excellent line and load regulation characteristics
  • Built-in thermal shutdown protection

Advantages

  • Precise and stable voltage reference
  • Wide operating temperature range
  • Low power consumption
  • Small package size for space-constrained applications
  • Easy to integrate into various electronic systems

Disadvantages

  • Limited output voltage range
  • Relatively high initial cost compared to standard voltage references

Working Principles

The ADR510ARTZ-R2 utilizes a bandgap voltage reference circuit to generate a stable and accurate output voltage. It compensates for temperature variations by employing a proportional-to-absolute-temperature (PTAT) current source and a negative temperature coefficient (NTC) resistor. This design ensures that the output voltage remains constant over a wide temperature range.

Detailed Application Field Plans

The ADR510ARTZ-R2 is commonly used in various applications, including:

  1. Precision analog-to-digital converters (ADCs)
  2. Digital-to-analog converters (DACs)
  3. Voltage regulators
  4. Battery-powered devices
  5. Industrial control systems
  6. Medical equipment
  7. Test and measurement instruments

Detailed and Complete Alternative Models

  1. ADR510BRTZ-R2: Similar specifications and package as ADR510ARTZ-R2, but with an extended operating temperature range of -55°C to +125°C.
  2. ADR510ARTZ: Same specifications and package as ADR510ARTZ-R2, but without the "R2" suffix indicating RoHS compliance.

Note: Please refer to the manufacturer's datasheet for a comprehensive list of alternative models and their specifications.

Word count: 315 words

技術ソリューションにおける ADR510ARTZ-R2 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ADR510ARTZ-R2 in technical solutions:

  1. Question: What is the ADR510ARTZ-R2?
    Answer: The ADR510ARTZ-R2 is a precision voltage reference IC (integrated circuit) manufactured by Analog Devices.

  2. Question: What is the purpose of using the ADR510ARTZ-R2 in technical solutions?
    Answer: The ADR510ARTZ-R2 is commonly used as a stable voltage reference in various applications, such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), power supplies, and sensor interfaces.

  3. Question: What is the voltage output range of the ADR510ARTZ-R2?
    Answer: The ADR510ARTZ-R2 provides a fixed output voltage of 5.0 volts.

  4. Question: How accurate is the voltage output of the ADR510ARTZ-R2?
    Answer: The ADR510ARTZ-R2 has a high initial accuracy of ±0.04% and a low temperature coefficient of ±10 ppm/°C, ensuring precise and stable voltage references.

  5. Question: Can the ADR510ARTZ-R2 operate over a wide temperature range?
    Answer: Yes, the ADR510ARTZ-R2 is designed to operate reliably over a temperature range of -40°C to +125°C.

  6. Question: Is the ADR510ARTZ-R2 suitable for battery-powered applications?
    Answer: Yes, the ADR510ARTZ-R2 has a low quiescent current consumption of 1.5 mA, making it suitable for power-constrained applications.

  7. Question: Does the ADR510ARTZ-R2 require any external components for operation?
    Answer: No, the ADR510ARTZ-R2 is a complete voltage reference solution and does not require any external components.

  8. Question: Can multiple ADR510ARTZ-R2 ICs be used in parallel for higher current output?
    Answer: Yes, multiple ADR510ARTZ-R2 ICs can be connected in parallel to achieve higher current output while maintaining the same voltage reference.

  9. Question: Is the ADR510ARTZ-R2 available in different package options?
    Answer: Yes, the ADR510ARTZ-R2 is available in a small SOT-23 package, which is suitable for space-constrained applications.

  10. Question: Where can I find more information about the ADR510ARTZ-R2 and its application notes?
    Answer: You can refer to the datasheet provided by Analog Devices or visit their website for detailed information and application notes on the ADR510ARTZ-R2.