QD Devices Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ADG823BRM
詳細を表示 DataSheets

ADG823BRM

Product Overview

Category

ADG823BRM belongs to the category of analog switches.

Use

The ADG823BRM is primarily used for signal routing and switching applications in electronic circuits.

Characteristics

  • Analog switch with low on-resistance
  • Wide voltage range operation
  • High bandwidth capability
  • Low power consumption
  • Small package size

Package

The ADG823BRM comes in a small outline integrated circuit (SOIC) package.

Essence

The essence of ADG823BRM lies in its ability to provide efficient and reliable signal routing and switching capabilities in various electronic systems.

Packaging/Quantity

The ADG823BRM is typically packaged in reels, containing a specified quantity of units per reel.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • On-Resistance: 1.5Ω (typical)
  • Bandwidth: 200MHz (typical)
  • Power Consumption: 0.5μW (typical)
  • Package Type: SOIC-8

Detailed Pin Configuration

The ADG823BRM has a total of 8 pins arranged as follows:

  1. Pin 1: VDD - Positive supply voltage
  2. Pin 2: IN1 - Input control signal 1
  3. Pin 3: IN2 - Input control signal 2
  4. Pin 4: GND - Ground
  5. Pin 5: COM - Common terminal
  6. Pin 6: NO - Normally open terminal
  7. Pin 7: NC - Normally closed terminal
  8. Pin 8: VSS - Negative supply voltage

Functional Features

  • Low on-resistance ensures minimal signal distortion during switching.
  • Wide voltage range operation allows compatibility with various input/output voltage levels.
  • High bandwidth capability enables the transmission of high-frequency signals without significant loss.
  • Low power consumption contributes to energy efficiency in electronic systems.
  • Small package size facilitates integration into compact circuit designs.

Advantages and Disadvantages

Advantages

  • Efficient signal routing and switching capabilities
  • Wide voltage range operation
  • High bandwidth capability
  • Low power consumption
  • Compact package size

Disadvantages

  • Limited number of channels
  • Relatively higher on-resistance compared to some alternative models

Working Principles

The ADG823BRM operates based on the principle of a solid-state switch. When the control signals (IN1 and IN2) are applied, the switch connects the common terminal (COM) to either the normally open terminal (NO) or the normally closed terminal (NC), depending on the control signal combination.

Detailed Application Field Plans

The ADG823BRM finds applications in various fields, including but not limited to: - Audio and video signal routing - Data acquisition systems - Test and measurement equipment - Industrial automation - Communication systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ADG823BRM include: - ADG824BRM - ADG825BRM - ADG826BRM - ADG827BRM

These models provide comparable features and can be considered as alternatives based on specific application requirements.

Word count: 345 words

技術ソリューションにおける ADG823BRM の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ADG823BRM in technical solutions:

  1. Q: What is ADG823BRM? A: ADG823BRM is a specific model of analog switch IC (Integrated Circuit) manufactured by Analog Devices.

  2. Q: What is the purpose of ADG823BRM? A: ADG823BRM is designed to act as a high-performance, low-voltage, dual SPDT (Single Pole Double Throw) analog switch for various applications.

  3. Q: What are some typical applications of ADG823BRM? A: ADG823BRM can be used in audio and video signal routing, battery-powered systems, portable devices, communication systems, and other similar applications.

  4. Q: What is the voltage range supported by ADG823BRM? A: ADG823BRM supports a wide voltage range from 1.8V to 5.5V, making it compatible with various power supply configurations.

  5. Q: How many channels does ADG823BRM have? A: ADG823BRM has two independent channels, allowing for simultaneous switching between two different signals.

  6. Q: What is the maximum current handling capability of ADG823BRM? A: ADG823BRM can handle a maximum continuous current of 300mA per channel, making it suitable for both small and moderate loads.

  7. Q: Can ADG823BRM handle bidirectional signals? A: Yes, ADG823BRM supports bidirectional signal flow, allowing for seamless switching between input and output paths.

  8. Q: Does ADG823BRM have built-in protection features? A: Yes, ADG823BRM incorporates ESD (Electrostatic Discharge) protection on all pins, ensuring robustness against static discharge events.

  9. Q: What is the operating temperature range of ADG823BRM? A: ADG823BRM can operate within a temperature range of -40°C to +125°C, making it suitable for both industrial and consumer applications.

  10. Q: Is ADG823BRM available in different package options? A: Yes, ADG823BRM is available in various package options, including SOIC (Small Outline Integrated Circuit) and MSOP (Mini Small Outline Package), providing flexibility for different PCB layouts and space constraints.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.