QD Devices Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AD620BR
詳細を表示 DataSheets

AD620BR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Amplifier
  • Characteristics: Low power, precision instrumentation amplifier
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Provides amplification and filtering of weak signals in various applications
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Supply Voltage: ±2.3V to ±18V
  • Input Offset Voltage: 50µV maximum
  • Input Bias Current: 1.0nA maximum
  • Gain Bandwidth Product: 1MHz typical
  • Input Voltage Range: ±Vs/2
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The AD620BR has the following pin configuration:

  1. REF: Reference voltage input
  2. IN-: Inverting input
  3. IN+: Non-inverting input
  4. VS-: Negative power supply
  5. OUT: Output
  6. VS+: Positive power supply
  7. RG: Gain resistor
  8. NC: No connection

Functional Features

  • Low noise and low distortion
  • High common-mode rejection ratio (CMRR)
  • Programmable gain with external resistor
  • Internal gain setting resistors for easy configuration
  • Rail-to-rail output swing capability
  • Excellent long-term stability

Advantages and Disadvantages

Advantages

  • High accuracy and precision
  • Wide operating voltage range
  • Flexible gain configuration
  • Suitable for low-power applications
  • Good temperature stability

Disadvantages

  • Limited bandwidth compared to some alternatives
  • Requires external gain resistor for precise gain control

Working Principles

The AD620BR is a precision instrumentation amplifier that amplifies small differential input voltages while rejecting common-mode noise. It consists of a high-precision operational amplifier, precision resistors, and internal gain setting resistors. The input stage provides a high input impedance, allowing direct connection to various sensors and transducers.

The gain of the amplifier can be easily programmed using an external resistor connected to the RG pin. This flexibility enables the AD620BR to be used in a wide range of applications requiring different levels of amplification.

Detailed Application Field Plans

The AD620BR is widely used in various fields, including:

  1. Biomedical instrumentation: ECG (Electrocardiogram), EEG (Electroencephalogram), and EMG (Electromyography) equipment.
  2. Industrial process control: Signal conditioning for temperature, pressure, and flow sensors.
  3. Strain gauge amplification: Load cells, force sensors, and pressure transducers.
  4. Data acquisition systems: Bridge amplification and sensor signal conditioning.
  5. Portable instrumentation: Battery-powered devices requiring low power consumption.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the AD620BR are:

  1. INA128: Precision instrumentation amplifier with higher bandwidth.
  2. AD8221: Low power, rail-to-rail output instrumentation amplifier.
  3. MCP6N11: Programmable gain instrumentation amplifier with low input offset voltage.

These alternatives provide options for specific application requirements and can be considered based on factors such as cost, performance, and availability.

In conclusion, the AD620BR is a versatile and precise instrumentation amplifier suitable for a wide range of applications. Its low power consumption, flexible gain configuration, and excellent long-term stability make it a popular choice among engineers and designers in various industries.

Word count: 440 words

技術ソリューションにおける AD620BR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AD620BR in technical solutions:

  1. Q: What is AD620BR? A: AD620BR is a low-cost, precision instrumentation amplifier that can amplify small differential voltages in the presence of common-mode noise.

  2. Q: What are some typical applications of AD620BR? A: AD620BR is commonly used in medical instrumentation, industrial process control, strain gauge amplification, and sensor signal conditioning.

  3. Q: What is the voltage supply range for AD620BR? A: AD620BR operates from a single power supply ranging from +2.3V to +18V.

  4. Q: Can AD620BR handle high common-mode voltages? A: Yes, AD620BR has a high common-mode rejection ratio (CMRR) of 120dB, making it suitable for applications with high common-mode voltages.

  5. Q: How much gain can be achieved with AD620BR? A: AD620BR has a programmable gain range from 1 to 1000, allowing for flexible amplification based on the specific application requirements.

  6. Q: Does AD620BR have built-in filtering capabilities? A: No, AD620BR does not have built-in filtering capabilities. Additional external filters may be required depending on the application.

  7. Q: What is the input impedance of AD620BR? A: AD620BR has a high input impedance of 20MΩ, minimizing the loading effect on the signal source.

  8. Q: Is AD620BR suitable for low-power applications? A: Yes, AD620BR has a low quiescent current of 700µA, making it suitable for battery-powered or low-power applications.

  9. Q: Can AD620BR operate in harsh environments? A: Yes, AD620BR is designed to operate in a wide temperature range (-40°C to +85°C) and is suitable for industrial and automotive applications.

  10. Q: Are there any evaluation boards or reference designs available for AD620BR? A: Yes, Analog Devices provides evaluation boards and reference designs that can help users quickly prototype and implement AD620BR in their applications.

Please note that these answers are general and may vary depending on the specific requirements of your application. It's always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.