QD Devices Inc.
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AD2S80AKD
詳細を表示 DataSheets

AD2S80AKD

Product Overview

  • Category: Integrated Circuit
  • Use: Analog-to-Digital Converter (ADC)
  • Characteristics: High-resolution, high-speed, low-power consumption
  • Package: Dual-In-Line Package (DIP)
  • Essence: Converts analog signals to digital data
  • Packaging/Quantity: Available in reels of 1000 units

Specifications

  • Resolution: 16 bits
  • Sampling Rate: 500 kSPS (thousand samples per second)
  • Power Supply: +5V
  • Operating Temperature Range: -40°C to +85°C
  • Input Voltage Range: ±10V
  • Reference Voltage: +5V

Pin Configuration

The AD2S80AKD has a total of 28 pins. The pin configuration is as follows:

  1. VREF
  2. AGND
  3. D7
  4. D6
  5. D5
  6. D4
  7. D3
  8. D2
  9. D1
  10. D0
  11. CLK
  12. CS
  13. RD
  14. WR
  15. DGND
  16. VDD
  17. REFOUT
  18. NC
  19. NC
  20. NC
  21. NC
  22. NC
  23. NC
  24. NC
  25. NC
  26. NC
  27. NC
  28. NC

Functional Features

  • High-resolution conversion of analog signals to digital data
  • Fast sampling rate for real-time applications
  • Low power consumption for energy-efficient operation
  • Wide input voltage range for versatile signal processing
  • On-chip reference voltage generation for accurate conversions

Advantages and Disadvantages

Advantages

  • High resolution enables precise measurement and control
  • Fast sampling rate allows for real-time data acquisition
  • Low power consumption reduces energy costs and extends battery life
  • Wide input voltage range accommodates various signal levels
  • On-chip reference voltage simplifies system design

Disadvantages

  • Limited pin configuration options may restrict certain applications
  • Requires external components for complete system integration
  • Relatively high cost compared to lower-resolution ADCs

Working Principles

The AD2S80AKD utilizes a successive approximation algorithm to convert analog signals into digital data. It employs an internal reference voltage to establish the conversion range and compares the input voltage with a series of binary-weighted voltages. The converter iteratively adjusts the binary codes until the digital output accurately represents the input voltage.

Detailed Application Field Plans

The AD2S80AKD is commonly used in the following application fields:

  1. Industrial automation: Precise control of motors, actuators, and sensors.
  2. Medical equipment: Accurate measurement and monitoring of vital signs.
  3. Test and measurement instruments: High-resolution data acquisition and analysis.
  4. Audio processing: Conversion of analog audio signals to digital format.
  5. Robotics: Feedback control systems for precise movement and positioning.

Alternative Models

For alternative models with similar functionality, consider the following options:

  1. AD2S81AKD: Higher resolution (18 bits) version of AD2S80AKD.
  2. AD2S82AKD: Lower resolution (14 bits) version of AD2S80AKD.
  3. AD2S83AKD: Faster sampling rate (1 MSPS) version of AD2S80AKD.

These alternatives provide flexibility in choosing the appropriate ADC based on specific requirements.

In conclusion, the AD2S80AKD is a high-resolution analog-to-digital converter that offers fast conversion speed, low power consumption, and wide input voltage range. Its application spans across various industries, including industrial automation, medical equipment, test and measurement instruments, audio processing, and robotics. While it has certain limitations, alternative models with different specifications are available to suit specific needs.

技術ソリューションにおける AD2S80AKD の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AD2S80AKD in technical solutions:

1. What is the AD2S80AKD? The AD2S80AKD is a high-resolution, programmable resolver-to-digital converter (RDC) that converts the angular position of a rotating shaft into a digital representation.

2. What is the resolution of the AD2S80AKD? The AD2S80AKD has a resolution of up to 14 bits, providing precise angular position measurements.

3. How does the AD2S80AKD interface with a resolver? The AD2S80AKD interfaces with a resolver through a transformer-based excitation circuit and a demodulator circuit to extract the resolver's sine and cosine signals.

4. Can the AD2S80AKD be used in closed-loop control systems? Yes, the AD2S80AKD is commonly used in closed-loop control systems where accurate position feedback is required.

5. What is the operating voltage range of the AD2S80AKD? The AD2S80AKD operates from a single power supply voltage ranging from +5V to +15V.

6. Does the AD2S80AKD provide any diagnostic features? Yes, the AD2S80AKD includes built-in diagnostics for fault detection, such as loss of resolver signal or excessive noise.

7. Can the AD2S80AKD be used in harsh environments? Yes, the AD2S80AKD is designed to operate in industrial environments and can withstand temperature extremes and electrical noise.

8. What communication interface does the AD2S80AKD support? The AD2S80AKD supports a serial peripheral interface (SPI) for easy integration with microcontrollers or other digital devices.

9. Can the AD2S80AKD be used with different types of resolvers? Yes, the AD2S80AKD is compatible with a wide range of resolver types, including brushless resolvers and linear variable differential transformers (LVDTs).

10. Are evaluation boards available for the AD2S80AKD? Yes, Analog Devices provides evaluation boards and software tools to help users quickly evaluate and integrate the AD2S80AKD into their technical solutions.

Please note that these answers are general and may vary depending on specific application requirements.